Ricoh GX7000 - Color Inkjet, Aficio GX7000 Printer Installation Manual

1. Open the printer box, remove the cables and other accessories, and place them aside.

Enlist the help of someone (the printer weighs approximately 43 lb) to remove the printer
from the box, and place it on a sturdy work surface with sufficient operational clearances.

2. Remove the orange adhesive tape, at tach the power cord and the USB cable, but do not
power on the printer at this time.

3. Remove the SubliJet™ R ink cartridges from their packages. Open the right front
cover on the printer, and inser t the cartridges in the order indicated—from left to right
(as you face the printer): black (K), cyan (C), magenta (M) and yellow (Y). Press each
cartridge in until it engages securely, and close the cover once all of the cartridges are in
place. Never shake or agitate the cartridges.

4. Remove the paper tray, pull the cover straight up, and adjust the guides for the paper size
you will be using. Load the paper, put the cover back on, and reinsert the tray into the
printer.

5. Plug the power cord into a power outlet, plug the USB cable to your computer, but do not
turn on the printer yet.

6. Start your computer, wait until Windows is fully oper ational, and then insert the Ricoh
CD in the CD-ROM drive. The CD contains the printer driver, and the program will start
automatically. Follow the on-screen instructions, beginning with the selection of the
language.

7. Proceed to the installation of SubliJet™-R Driver.

1. Visit the Sawgrass Technologies web site at www.sawgrassink.com and navigate to

the PowerDriver-R Download page (Begin by highlighting Technical Support, then
highlight SubliJet Technical Support, then SubliJet Downloads, and finally
highlight and click on PowerDriver Downloads for SubliJet ) (see graphic below).

2. In the PowerDriver Downloads for SubliJet window that opens
(Figure 3), click on the name of your printer that is associated with
your operating system, and save the file to your desk top. The file
name and graphic will resemble GX7000R_v2.4.0.exe (see Figure 2
at right).

3. On your desktop, double-click on the name of the file you just downloaded and click Next
on the welcome window to advance to the License Agreement Window. Click on I Agree
to continue with the installation. Refer to the illustrations below.

SETUP INSTRUCTIONS: RICOH AFICIO GX7000 GELSPRINTER

RICOH AFICIO GX7000 GELSPRINTER

Installation Guide: Setup Instructions: Printer, Driver Software, and SubliJet-R Ink for

R-1_10,Dec’09- jcr

ink. differently.

®

and SubliJet

®

-R are Registered Trademarks, and Sawgrass is a Trademark of Sawgrass Technologies, inc. Ricoh GX7000 & Gelsprinter are Trademarks of Ricoh Corporation. Sawgrass Sawgrass Sawgrass Sawgrass Sawgrass Sawgrass Sawgrass Sawgrass

SUBLIJET-R IN STALLATION GUIDE PAGE 1 OF 2

PowerDriver-R Installation

1

2 3

4

5

6

7

2

3

4

1

Figure 1

Figure 2

Figure 3

Figure 4 Figure 5

4. Click Next on the Choose Components window to move to the Choose Install Location
window. Here, click Install, unless you wish to change the location on your drive where
you wish to install this program. In this case, click Browse, select the location, then click Install.

5. Once you click Install, you will see the installation progress bar, while a window will open
to warn about the software not passing Windows Logo Testing (see illustrations below).
Ignore this warning, click Continue Anyway, and continue with the installation.

6. As installation near s completion, a new window will prompt you to register your product
(see illustration below left). Do not skip this step, as registration is required to unlock the
full functionality of the software. Click Click Here to Obtain Registration Code.

7. Follow the prompts to go on line, fill in the required information and obtain the registration
code. However received, copy the number provided into the blank Registration Code
space, and click Apply Code (see Figure 12 below).

8. The registration process is now complete (see upper right). Click OK, and the installation
program warns you to disable the color management elements in your graphics software.
Click Continue to proceed.

9.

This window indicates that the loading process has completed successfully. Click Close

to continue.

10. The SubliJet GX7000 Setup window gives you the option of rebooting your computer.
Close all other open applications, and click Yes to restart (reboot) your computer to
complete the installation process.

NOTE: For the absolute latest Information and Updates on all Products, Materials,

Processes, and/or Procedures relative to all offerings by or through Sawgrass Technologies,
Inc., please refer to our Website: w ww.sawgrassink.com.

RICOH AFICIO GX7000 GELSPRINTER

Installation Guide: Setup Instructions: Printer, Driver Software, and SubliJet-R Ink for

SUBLIJET-R IN STALLATION GUIDE PAGE 2 OF 2

ink. differently.

®

and SubliJet

®

-R are Registered Trademarks, and Sawgrass is a Trademark of Sawgrass Technologies, inc. Ricoh GX7000 & Gelsprinter are Trademarks of Ricoh Corporation. Sawgrass Sawgrass Sawgrass Sawgrass Sawgrass Sawgrass Sawgrass Sawgrass

SETUP INSTRUCTIONS: (CONTINUED)

Figure 6 Figure 7

Figure 9Figure 8

Figure 10 Figure 11

Figure 12

Figure 13

Congratulations, you have registered your product

Figure 14

Figure 16

Figure 15