How it Works
Ricoh
Loading...
A
Loading...
Loading...
Aficio SP 100SU e
Owner's Manual
76 pgs1.51 Mb0
Table of contents
Loading...

Ricoh Aficio SP 100SU e Owner's Manual

Operating Instructions
User Guide
For safe and correct use, be sure to read "Safety Information" before using the machine.

TABLE OF CONTENTS

1. Guide to the Machine
How to Read This Manual.................................................................................................................................5
Introduction.....................................................................................................................................................5
Legal Prohibition.............................................................................................................................................5
Model-Specific Information...............................................................................................................................6
Guide to Components........................................................................................................................................7
Exterior............................................................................................................................................................7
Interior.............................................................................................................................................................8
Control Panel..................................................................................................................................................8
Installing the Driver and Software...................................................................................................................11
Quick Install..................................................................................................................................................11
Upgrading or Deleting the Printer Driver...................................................................................................11
Installing the Smart Organizing Monitor...................................................................................................12
What is Smart Organizing Monitor?..............................................................................................................13
2. Loading Paper
Supported Paper..............................................................................................................................................15
Non-Recommended Paper Types...................................................................................................................16
Print Area..........................................................................................................................................................17
Loading Paper..................................................................................................................................................19
Placing Originals..............................................................................................................................................22
3. Printing Documents
Basic Operation...............................................................................................................................................25
Canceling a Print Job...................................................................................................................................27
If a Paper Mismatch Occurs............................................................................................................................29
Continuing Printing Using Mismatched Paper...........................................................................................29
Resetting the Print Job..................................................................................................................................29
4. Copying Originals
Basic Operation...............................................................................................................................................31
1
Canceling a Copy.......................................................................................................................................32
Making Enlarged or Reduced Copies............................................................................................................33
Specifying Reduce/Enlarge.......................................................................................................................33
Copying Both Sides of an ID Card onto One Side of Paper........................................................................35
Copying an ID Card....................................................................................................................................35
Specifying the Scan Settings...........................................................................................................................37
Adjusting Image Density..............................................................................................................................37
Selecting the Document Type According to Original...............................................................................37
5. Scanning from a Computer
Basic Operation...............................................................................................................................................39
Basic Operation for WIA Scanning...........................................................................................................40
6. Configuring the Machine Using Smart Organizing Monitor
Checking the System Information....................................................................................................................41
Checking the Status Information.................................................................................................................41
Printing the Configuration Page..................................................................................................................42
Configuring the Machine Settings...................................................................................................................43
Tab Settings..................................................................................................................................................43
Updating the Firmware....................................................................................................................................44
7. Maintaining the Machine
Replacing the Print Cartridge..........................................................................................................................45
Cautions When Cleaning................................................................................................................................47
Cleaning the Inside of the Machine................................................................................................................48
Cleaning the Exposure Glass..........................................................................................................................49
8. Troubleshooting
Common Problems...........................................................................................................................................51
Paper Feed Problems.......................................................................................................................................52
Removing Printing Jams...............................................................................................................................53
Print Quality Problems......................................................................................................................................56
Checking the Condition of the Machine....................................................................................................56
Printer Problems................................................................................................................................................57
Print Positions Do Not Match Display Positions.........................................................................................58
Copier Problems...............................................................................................................................................59
2
Scanner Problems.............................................................................................................................................60
Error and Status Indicate on the Control Panel..............................................................................................61
Codes on the Screen...................................................................................................................................61
Error and Status Messages Appear on the Smart Organizing Monitor......................................................62
9. Appendix
Notes About the Toner.....................................................................................................................................63
Moving and Transporting the Printer..............................................................................................................64
Disposal........................................................................................................................................................64
Where to Inquire..........................................................................................................................................64
Consumables....................................................................................................................................................65
Print Cartridge..............................................................................................................................................65
Specifications of the Machine.........................................................................................................................66
General Function Specifications.................................................................................................................66
Printer Function Specifications....................................................................................................................67
Copier Function Specifications...................................................................................................................67
Scanner Function Specifications.................................................................................................................68
Trademarks.......................................................................................................................................................69
INDEX.............................................................................................................................................................71
3
4

1. Guide to the Machine

How to Read This Manual

Introduction

This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy place for quick reference.

Legal Prohibition

Do not copy or print any item for which reproduction is prohibited by law.
Copying or printing the following items is generally prohibited by local law:
bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports, driver's licenses.
The preceding list is meant as a guide only and is not inclusive. We assume no responsibility for its completeness or accuracy. If you have any questions concerning the legality of copying or printing certain items, consult with your legal advisor.

Disclaimer

Contents of this manual are subject to change without prior notice.
In no event will the company be liable for direct, indirect, special, incidental, or consequential damages as a result of handling or operating the machine.
For good output quality, the manufacturer recommends that you use genuine toner from the manufacturer.
Two kinds of size notation are employed in this manual.
Some illustrations or explanations in this guide may differ from your product due to improvement or change in the product.
5
CHZ966
1. Guide to the Machine

Model-Specific Information

This section explains how you can identify the region your machine belongs to.
There is a label on the rear of the machine, located in the position shown below. The label contains details that identify the region your machine belongs to. Read the label.
The following information is region-specific. Read the information under the symbol that corresponds to the region of your machine.
(mainly Europe and Asia)
If the label contains the following, your machine is a region A model:
• CODE XXXX -22, -27
• 220-240V
(mainly North America)
If the label contains the following, your machine is a region B model:
• CODE XXXX -11, -17
• 120V
• Dimensions in this manual are given in two units of measure: metric and inch. If your machine is a Region A model, refer to the metric units. If your machine is a Region B model, refer to the inch units.
6
CHZ968
1 23 45
6
10
7 8 9
11

Guide to Components

Guide to Components
This section introduces the names of the various parts on the front and rear side of the machine and outlines their functions.

Exterior

1. Control Panel
Contains a screen and keys for machine control.
2. Exposure Glass Cover
Open this cover to place originals on the exposure glass.
3. Input Tray
This tray can hold up to 50 sheets of plain paper.
4. Exposure Glass
Place originals here sheet by sheet.
5. Input Tray Cover
Set this cover up and pull out the paper source tray to load paper.
6. Tray Extension
Pull out and extend this tray extension to hold the output paper.
7. Front Cover
Open this cover to pull out the output tray before printing.
7
1
CHZ004
1. Guide to the Machine
8. Maintenance Cover
Lift up this cover to replace consumables or clear a paper jam.
9. USB Port
Use this port to connect the machine to a computer using a USB cable.
10. Power Connector
Connect the power cord to the machine here. Insert the other end of the cable into a nearby wall outlet.
11. Power Switch
Use this switch to turn the power on or off.

Interior

Control Panel

8
1. Print Cartridge
A replacement consumable that is required to make prints on paper. It needs to be replaced after approximately every 2000 pages printed. For details about replacing the cartridge, see p.45 "Replacing the Print Cartridge".
• The actual control panel may look different from the illustration below, depending on the country of use.
CHZ951
1
2
3
4
5
6
7
8
9
Guide to Components
1. Screen
Shows the number of copies and the error code.
2. [Number of copies] Key
Use this button to change the number of copies.
3. Density Screen
Displays the copy density in three levels.
The print density is indicated by which segment is lit on this indicator.
• Left: Lighter than normal
• Middle: Normal density
• Right: Darker than normal
4. [Density] Key
Use this button to adjust the copy density.
5. [ID Card Copy] Key
Use this button to perform an ID copy.
6. [Clear/Stop] Key
When the machine is online, press this key to cancel an ongoing print job.
9
1. Guide to the Machine
7. [Start] Key
Use this button to start copying.
8. Power Indicator
This indicator lights up blue when the machine is turned on. It flashes when a print job is received and while printing or scanning is in progress.
9. Alert Indicator
This indicator lights up red when the machine runs out of paper or consumables, when the paper settings do not match the settings specified by the driver, or when other abnormalities occur. It flashes slowly when the machine is almost out of toner.
10

Installing the Driver and Software

Installing the Driver and Software
You can install the necessary driver for this machine using the included CD-ROM.
The operating systems compatible with the drivers and software for this machine are: Windows XP/ Vista/7 and Windows Server 2003/2003 R2/2008/2008 R2.
The procedure in this section is an example based on Windows 7. The actual procedure may vary depending on the operating system you are using.
• Be sure to disconnect the USB cable from the machine and turn the machine off before beginning the installation.

Quick Install

Use Quick Install to install the printer driver, TWAIN driver, and WIA driver from the CD-ROM.
1. Close all applications except this manual.
2. Insert the CD-ROM into the CD-ROM drive.
3. From the CD-ROM menu, click [USB Quick Install].
4. Follow the instructions in the installation wizard.

Upgrading or Deleting the Printer Driver

Upgrading the printer driver
1. On the [Start] menu, click [Devices and Printers].
2. Right-click the icon of the printer model you want to modify, and then click [Printer
properties].
3. Click the [Advanced] tab.
4. Click [New Driver...], and then click [Next].
5. Click [Have Disk...].
6. Click [Browse...], and then select the printer driver location.
7. Click [OK], and then specify the printer model.
8. Click [Next].
9. Click [Finish].
10. Click [OK] to close the printer properties window.
11
1. Guide to the Machine
11. Restart the computer.
Deleting the printer driver
1. On the [Start] menu, click [Devices and Printers].
2. Right-click the icon of the printer you want to delete, and then click [Remove device].
3. Click [Yes].
4. Click any printer icon, and then click [Print server properties].
5. Click the [Drivers] tab.
6. Click the [Change Driver Settings] button if it is displayed.
7. Click [Remove...].
8. Select [Remove driver and driver package.], and then click [OK].
9. Click [Yes].
10. Click [Delete].
11. Click [OK].
12. Click [Close] to close the print server properties window.

Installing the Smart Organizing Monitor

Smart Organizing Monitor is a utility that allows you to modify the machine’s settings or view the machine’s status from your computer. For details, see p.13 "What is Smart Organizing Monitor?".
1. Close all applications except this manual.
2. Insert the CD-ROM into the CD-ROM drive.
3. From the CD-ROM menu, click [Smart Organizing Monitor].
4. Select a language for Smart Organizing Monitor.
5. Follow the instructions in the installation wizard.
12

What is Smart Organizing Monitor?

What is Smart Organizing Monitor?
Install this utility on your computer from the included CD-ROM before using it.
Smart Organizing Monitor provides the following functions:
• Displays the status of the machine
Displays paper jam messages and other error messages.
• Paper size and type settings
Displays the settings for paper sizes or types available on this machine.
• Print test and configuration pages
Prints List/Report to check the list of settings for this machine and other information.
• Modify the system settings
Use to change custom paper size settings and other settings on this machine.
• Modify the printer settings
Use to change print settings such as [Error Skip:] and [I/O Time Out:] on this machine.
• Modify the copy settings
Use to change to change copy settings such as [Document Type:] and [Reduce / Enlarge:] on this machine.
For details about basic instructions on how to use Smart Organizing Monitor, see p.41 "Configuring the Machine Using Smart Organizing Monitor".
13
1. Guide to the Machine
14

2. Loading Paper

Supported Paper

Paper Size
• A4
• 8 1/2 " × 11 " (Letter)
• B5
• 5 1/2 " × 8 1/2 " (Half Letter)
• 7 1/4 " × 10 1/2 " (Executive)
• A5
• A6
• B6
• 16K (197 × 273 mm)
• 16K (195 × 270 mm)
• 16K (184 × 260 mm)
• Custom Paper Size
The following paper sizes are supported as custom paper sizes:
• Approximately 90-216 mm (3.6-8.5 inches) in width
• Approximately 148-297 mm (5.8-11.7 inches) in length
Paper Type
• Plain Paper (65-104 g/m2 (20-24 lb.))
• Recycled Paper (65-104 g/m2 (20-24 lb.))
• Thin Paper (60-64 g/m2 (16 lb.))
• Thick Paper (105 g/m2 (28 lb.))
Paper Capacity
50 sheets
(80 g/m2, 20 lb.)
15
2. Loading Paper

Non-Recommended Paper Types

Do not use the following types of paper:
• Ink-jet printer paper
• GelJet special paper
• Bent, folded, or creased paper
• Curled or twisted paper
• Wrinkled paper
• Damp paper
• Dirty or damaged paper
• Paper that is dry enough to emit static electricity
• Paper that has already been printed onto, except a preprinted letterhead paper.
Malfunctions are especially likely when using paper printed on by other than a laser printer (e.g.monochrome and color copiers, ink-jet printers, etc.)
• Special paper, such as thermal paper and carbon paper
• Paper whose weight is heavier or lighter than the limitation
• Paper with windows, holes, perforations, cutouts, or embossing
• Adhesive label paper on which glue or base paper is exposed
• Paper with clips or staples
• When loading paper, take care not to touch the surface of the paper.
• Even if paper is adequate for the machine, poorly stored paper can cause paper misfeeds, print quality degradation, or malfunctions.
16

Print Area

CHZ904
2
3
3
1
4
4
The diagram below shows the area of the paper that the machine can print on.
From the printer driver
Print Area
1. Print area
2. Feed direction
3. Approx. 4.2 mm (0.2 inches)
4. Approx. 4.2 mm (0.2 inches)
• The print area may vary depending on the paper size and printer driver settings.
17
CHZ904
2
3
3
1
4
4
2. Loading Paper
Copier function
1. Print area
2. Feed direction
3. Approx. 4 mm (0.2 inches)
4. Approx. 3 mm (0.1 inches)
• The print area may vary depending on the paper size.
18
1
2
CHZ005
1
2
CHZ006

Loading Paper

Loading Paper
Load a stack of paper for printing in the input tray on the back of the machine.
• When loading paper, be sure to configure the size and type of paper. When printing a document, specify the paper size and type in the printer driver so that the settings configured when paper is loaded can be used for printing.
1. Open the input tray cover and pull out the tray.
2. After pulling out the tray, tilt it back and forth, and then attach the end of the input tray to
the machine.
19
CBK254
1
1
2
CHZ007
CHZ008
2. Loading Paper
3. Fan the paper before loading it in the tray.
4. Slide the paper guide on both sides outward, and then load the paper print side up until it
stops.
5. Adjust the paper guide on both sides to fit the paper width.
20
CHZ027
Loading Paper
6. Open the front cover and tray extension.

Specifying Paper Type and Paper Size Using Smart Organizing Monitor

The procedure in this section is an example based on Windows 7. The actual procedure may vary depending on the operating system you are using.
Specifying the paper type and paper size
1. On the [Start] menu, click [All Programs].
2. Click [Smart Organizing Monitor for SP 100 Series].
3. Click [Smart Organizing Monitor for SP 100 Series Status].
4. On the [Status] tab, click [Change...].
5. Select the paper type and paper size, and then click [OK].
6. Click [Close].
Changing the custom paper size
1. On the [Start] menu, click [All Programs].
2. Click [Smart Organizing Monitor for SP 100 Series].
3. Click [Smart Organizing Monitor for SP 100 Series Status].
4. On the [User Tool] tab, click [Printer Configuration].
5. On the [System] tab, select [mm] or [inch] in the [Measurement Unit:] list.
6. In the [Horizontal: (90 to 216 mm)] box, enter the width.
7. In the [Vertical: (148 to 297 mm)] box, enter the length.
8. Click [OK].
9. Click [Close].
21
Loading...
+ 53 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use