Rheem R801T DF, R801T Series Series Manual
Rheem Classic Plus™Series
Downflow Gas Furnace
FORM NO. G11-549
•
80% residential Gas Furnace CSA certified
•
PlusOne
™
Diagnostics — 7 Segment LED all units
•
PlusOne
™
Ignition System – DSI for reliability and longevity
•
Heat exchanger is removable for improved serviceability.
Aluminized steel construction provides maximum corrosion
resistance and thermal fatigue reliability.
•
Low profile 34" cabinet ideal for space constrained
installations
•
Integrated Control board features dip switches for easy
system set up
•
QR code for quick access to product information from your
smart phone or tablet
•
Constant Torque electrically commutated motor
Air
Gas Furnaces
R801T (DF) Series
✝A.F.U.E. (Annual Fuel Utilization Efficiency) calculated in accordance with
Department of Energy test procedures.
R801T Downflow Series
80% A.F.U.E.†
Input Rates 75-125 kBTU
Air
Table of Contents
R801T (DF) Series
2
TABLE OF CONTENTS
Standard & Optional Equipment ......................................................................3
Model Features/Physical Data & Specifications..................................................4
Model Number Identification ............................................................................5
Dimensional Data............................................................................................6
Blower Performance Data ................................................................................7
Accessories....................................................................................................8
Limited Warranty ............................................................................................9
HEAT EXCHANGER
INTEGRATED
FURNACE
CONTROL
DIRECT SPARK IGNITOR
WITH REMOTE SENSE
IN-SHOT BURNERS
DRAFT INDUCER MOTOR
Air
Standard & Optional Equipment
R801T (DF) Series
3
STANDARD EQUIPMENT
Completely assembled and wired; induced draft; pressure
switch; redundant main gas control; blower compartment door
safety switch; solid state time on/time off blower control; limit
control; manual shut-off valve, pressure regulator for natural
and L.P. (propane) gas; transformer; direct drive multi-speed
blower motor. Furnaces are equipped with cooling/heating
relay and transformer (40VA) ready for air conditioning
applications. (Please note: a thermostat is not included as
standard equipment.) Flame sensor diagnostics; on-board
twinning; fused-protection (secondary), 3rd speed option for
continuous fan; common heat/cool terminal.
OPTIONAL EQUIPMENT
NOTE: Furnace is not listed for use with fuels other than
natural or L.P. (propane) gas.
The complete terms of limited and other warranties are
available at our sales office, or through local installer.
All models can be converted by a qualified Rheem distributor
or local service dealer to use L.P. (propane) gas without
changing burners. Factory approved kits must be used to
convert from natural to L.P. (propane) gas and may be ordered
as optional accessories from a Rheem parts distributor.
For L.P. (propane) operation, refer to Conversion Kit Index Form.
NOTE: For natural and L.P. (propane) gas models, direct spark
ignition is 100% lockout type.
WARNING
THIS FURNACE IS NOT APPROVED
OR RECOMMENDED
FOR USE IN MOBILE HOMES
CONSTANT TORQUE ECM MOTOR
MODEL NUMBERS
R801T (DF) SERIES
R801TA075317Z*A R801TA075521Z*A
Input
in BTU’s/Hr [kW] ➁
75,000
[22]
75,000
[22]
Heating Capacity
in BTU’s/Hr [kW] ➀
60,000
[18]
60,000
[18]
High Altitude Input
in BTU’s/Hr [kW]*
67,500
[20]
67,500
[20]
Blower (D x W) in inches [mm]
11 x 7
[279 x 178]
11 x 10
[279 x 254]
Motor H.P.-Speeds Type [W]
1/2hp, 5spd,
X-13 [373]
1hp, 5spd,
X-13 [746]
Motor Full Load Amps 6.8 10.9
Heating Speed (factory setting) MED-HIGH MED
Cooling Speed (factory setting) HIGH HIGH
Cooling in CFM [L/s] @ 0.5"wc
[0.12 kPa] E.S.P. (nominal)
1200
[566]
2000
[944]
Rated E.S.P.
in "wc [kPa]
0.5
[0.12]
0.5
[0.12]
Temperature Rise Range
in °F [°C]
30-60
[17-33]
25-55
[13.9-30.6]
Max Outlet Air
in °F [°C]
165
[73.8]
165
[73.8]
Approx. Shipping Weight
in Lbs. [kg]
105
[48]
120
[54]
High Altitude Output Capacity
in BTU’s/Hr [kW]*
53,500
[16]
53,500
[16]
Heat Ext. Static Pressure
in "wc [kPa]
0.12
[0.029]
0.12
[0.029]
R801TA100521Z*A R801TA125524Z*A
100,000
[29]
125,000
[37]
72,500
[21]
89,000
[26.1]
81,000
[24]
99,000
[29]
0.15
[0.037]
0.2
[0.05]
90,000
[26]
112,500
[33]
11 x 10
[279 x 254]
11 x 10
[279 x 254]
1hp, 5spd,
X-13 [746]
1hp, 5spd,
X-13 [746]
10.9 10.9
MED-HIGH MED-HIGH
HIGH HIGH
2000
[944]
2000
[944]
0.5
[0.12]
0.5
[0.12]
30-60
[17-33]
35-65
[19.4-36.1]
190
[87.7]
185
[85.0]
120
[54]
140
[63]
80.0% 80.0%
AFUE - Electronic Ignition Modules ➀
80.0% 80.0%
NOTES: All models are 115V, 60HZ, 1Ø. Gas connection size for all models is 1/2" N.P.T.
➀ In accordance with D.O.E. test procedures.
➁ See Conversion Kit Index Form for high altitude derate in U.S. applications.
[ ] Designates Metric Conversions
Air
Model Features/Physical Data & Specifications
R801T (DF) Series
4
Physical Data and Specifications
U.S. and Canadian Models
•
80% residential Gas Furnace CSA certified
•
PlusOne
™
Diagnostics — 7 Segment LED all units
•
PlusOne
™
Ignition System – DSI for reliability and longevity
•
Heat exchanger is removable for improved serviceability.
Aluminized steel construction provides maximum corrosion
resistance and thermal fatigue reliability.
•
Low profile 34" cabinet ideal for space constrained
installations
•
Integrated Controls board features dip switches for easy
system set up
•
QR code for quick access to product information from your
smart phone or tablet
•
Constant Torque electrically commutated motor
Model Features
Loading...