FCC ID : YRN-AGC-0060RF
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modifications to this
equipment may cause harmful interference unless the modifications are expressly approved in
the instruction manual. The user could lose the authority to operate this equipment if an
unauthorized change or modification is made.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment may cause
harmful inter- ference to radio communications, if it is not installed and used in accordance
with the instructions. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful inter- ference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution
This device complies with part 15 of the FCC rules. Operation is subject to the following
conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a minimum
distance of 20 centimeters between the radiator and your body.
Change attribute -5 to +5
to validate
Parameters are : Bass, Treble, Balance, Fader (and go back to previous screen)
MENU
RADIO TEXT
PUSH
RADIO
TEXT
Return to current Audio source
Tempo ..
Current FM station name
XXXXXXXXXXXX
YYYYYYYYYY
Radio text displays up to 64 characters
Radio text of the current FM radio
station listened
If no information available, display "No
message"
Settings
LOW - 300 mV
MID - 600 mV
HIGH - 1200 mV
Renault values)
Audio Bass, Treble, Balance, Fader
AUX IN LOW/MID/HI
SPEED VOLUME Set 0 - 5 (0 is OFF)
Switch to the other line
PUSH
To validate (and go back to
previous screen)
Speed vol.
0
1
2OO
Switch to the other line
PUSH
To validate (and go back to
previous screen)
PUSH
PUSH
PUSH
PUSH
MID
LOW
AUX IN
O
O
HIGH
A
UDIO BASS
TREBLE
BALANCE
TREBLE
PUSH
PUSH
Loudness
Set Option On/Off
Sets appropriate parameter (On
or Off)
Loudness
ON
OFF
O
Switch to the other line
PUSH
To validate (and go back to
p
revious screen
)
BACK
PUSH
Language
List of Languages
Switch to the other line
PUSH
To validate (and go back to
p
revious screen
)
Language Language1
Language2
Language3
O
O
BACK
RENAULT Parameters are : AF, TA, REG, PTY31
RDS OPTIONS
PUSH
BACK
Set options
RDS AF
TA
REG
PUSH
TA
ON
OFF
O
Switch to the other line
PUSH
To validate (and go back to
p
revious screen
)
Pair Device
MOBILE PHONE
Ready to Pair screen
PUSH
Ready to Pair
Pin: 1234
Pairing
Connecting...
Pair OK - Connection
ANICALL HC2300
CONNECTED
Cell phone
input of pin
Return to current
Audio source
Max Devices screen
MAX devices already paired
Remove one before pairing a new
one
Max Devices Question
Delete a Phone Now?
YES
NO
NISSAN & RENAULT PIN : 1234
BAD PIN INPUT -
AUDIO DEVICE
with pin code
Pin code :
3 5 _ _
0123456789 VALIDATE
Pairing
Connecting...
Pair OK - Connection
ANIAUDIO DEVICE
CONNECTED
Return to current
Audio source
BAD PIN INPUT -
Renault:
The user has to enter the 4 digit pin code of its
Bluetooth audio device
Pairing
Failed
Pairing Failed
Pair Device in
Menu **
**
AUDIO DEVICE
without pin code
Connecting...
Connection
AUDIO DEVICE
CONNECTED
Return to current
Audio source
Default audio parameters
Set default audio parameters (yes /
No)
Sets adefault audio parameters
(yes or no)
Switch to the other line
PUSH
To validate (and go back to
previous screen)
BACK
PUSH
Reinitialize
audio
parameters
YES
NO
O
Select Device
PUSH
BACK
List of Paired Devices
NISSAN : When no device connected
RENAULT : with or without connected device
PUSH
Connecting...
Connection
Device B
CONNECTED
Return to current Audio source
Delete device
List of Paired Devices
(When nodevice connected)
PUSH
Deleted
PUSH
O
O
Device A
Device B
Device C
O
O
Device A
Device B
Device C
Device B
DELETED
Renault:
A
n icon is located near of the device name, to show the user
the type of device :
1) Phone
2) Audio device (A2DP)
3) Phone with audio capabilities
Bluetooth
PUSH
ON/OFF
Bluetooth
OFFONO
PUSH
BACK
BACK
Loading...