REMEHA Quinta Ace SCB-01 Installation And User Manual

United Kingdom

Installation and User Manual

Control panel & PCB

Quinta Ace

HMI S-control

SCB-01

Dear Customer,

Thank you very much for buying this appliance.

Please read through the manual carefully before using the product, and keep it in a safe place for later reference. In order to ensure continued safe and efficient operation we recommend that the product is serviced regularly. Our service and customer service organisation can assist with this.

We hope you enjoy years of problem-free operation with the product.

Contents

1 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.1 Liabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.1.1 Manufacturer's liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.1.2 Installer's liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.1.3 User's liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

2 About this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2.1 Symbols used in the manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

3 Description of the product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3.1 Control panel description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3.1.1 What each key means . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3.1.2 Meaning of the symbols on the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3.2 Description of the SCB-01 PCB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

4 User instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

4.1 Use of the control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

4.1.1 Browsing in the menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

4.2 Setting the language and time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

4.2.1 Setting the language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

4.2.2 Setting the time and date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

4.3 Changing the central heating flow temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

4.4 Changing the DHW temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

4.5 Setting the Timer Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

4.6 Changing user parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

5 Installer instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

5.1 Changing installer parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

5.2 Adjusting advanced parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

5.3 Carrying out an auto-detect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

5.4 Restoring to factory settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

5.5 Chimney sweep mode (forced full load or part load) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

5.6 Resetting the maintenance message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

5.7 Connected control PCBs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

5.8 Activating the manual mode menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

5.9 Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

5.9.1 Switching off the central heating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

5.9.2 Switching off DHW production . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

5.10 Reading out the Counter menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

5.11 Reading out current values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

5.12 Status and Sub-status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

6 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

6.1 Electrical connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

6.1.1 Connecting status notifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

6.1.2 Connecting 0–10 V output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

7 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

7.1 Setting the heating curve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

7.2 Cascade control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

8 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

8.1 List of parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

8.1.1 Description of the parameters - SCB-01 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

8.2 List of measured values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

8.2.1 Counters - SCB-01 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

8.2.2 Signals - SCB-01 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

8.2.3 Status and sub-status - SCB-01 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

9 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

9.1 Error memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

9.1.1 Reading out the Error memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

9.1.2 Clearing the error memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Contents

7698983 - v.02 - 17102018 3

1 Safety

1.1 Liabilities

1.1.1 Manufacturer's liability

Our products are manufactured in compliance with the requirements of the various Directives applicable. They are therefore delivered with the marking and any documents necessary. In the interests of the quality of our products, we strive constantly to improve them. We therefore reserve the right to modify the specifications given in this document.

Our liability as manufacturer may not be invoked in the following cases:

Failure to abide by the instructions on installing and maintaining the appliance. Failure to abide by the instructions on using the appliance. Faulty or insufficient maintenance of the appliance.

1.1.2

Installer's liability

The installer is responsible for the installation and initial commissioning of the appliance. The installer must observe the following instructions:

Read and follow the instructions given in the manuals provided with the appliance. Install the appliance in compliance with prevailing legislation and standards. Carry out initial commissioning and any checks necessary. Explain the installation to the user. If maintenance is necessary, warn the user of the obligation to check the appliance and keep it in good working order. Give all the instruction manuals to the user.

1.1.3 User's liability

To guarantee optimum operation of the system, you must abide by the following instructions:

Read and follow the instructions given in the manuals provided with the appliance. Call on a qualified professional to carry out installation and initial commissioning. Get your installer to explain your installation to you.

1 Safety

4 7698983 - v.02 - 17102018

Have the required inspections and maintenance carried out by a qualified installer. Keep the instruction manuals in good condition close to the appliance.

1 Safety

7698983 - v.02 - 17102018 5

2 About this manual

2.1 Symbols used in the manual

This manual contains special instructions, marked with specific symbols. Please pay extra attention when these symbols are used.

Caution Risk of material damage.

Important Please note: important information.

See Reference to other manuals or pages in this manual.

2 About this manual

6 7698983 - v.02 - 17102018

3 Description of the product

The Quinta Ace boiler is delivered with a combination of the control panel, control unit and extension PCB. The contents of this manual are based on the following software and navigation information:

Tab.1 Software and navigation information

Name visible in display Software version

Boiler Quinta Ace FSB-WHB-HE-150-300 01.07

Control panel HMI S-control HMI 02.01

PCB SCB-01 SCB-01 00.02

3.1

Control panel description

3.1.1 What each key means

Escape: Back to the previous level.

Reset: Manual reset.

CH flow temperature Access to set temperature.

Min. key: Lowering the value.

DHW temperature: Access to set temperature.

Plus key: Raising the value.

CH/DHW function: Toggles function ON/OFF

Enter key: Confirms selection or value.

Chimney-sweeping keys

Important Press the 1 and 2 keys simultaneously.

Menu keys

Important Press the 3 and 4 keys simultaneously.

3.1.2

Meaning of the symbols on the display

Tab.2 Possible symbols in the display (depending on available devices or functions)

Chimney sweep mode is enabled (forced full load or part load for

O2 measurement).

Information menu: read out various current values.

User menu: user-level parameters can be configured.

Installer menu: installer level parameter can be configured.

Manual mode menu: manual mode can be configured.

Error menu: errors can be read out.

Hour counter/timer program/time display menu.

Control PCB menu: (optional) control PCBs can be read out.

The outside temperature sensor is connected.

The room temperature sensor is connected.

The burner output level (1 to 5 bars, with each bar representing 20% output)

The heat pump is switched on.

Day display

Central heating operation is switched off.

Fig.1 Control panel

AD-3000833-01

1 2 3 4

5 6

3 Description of the product

7698983 - v.02 - 17102018 7

DHW operation is switched off.

The solar boiler is on and its heat level is displayed.

System water pressure display.

The holiday program is enabled.

Frost protection operation is enabled.

CH operation is enabled.

DHW operation is enabled.

Displaying the selected PCB.

The three-way valve is switched on.

The circulation pump is turning.

ECO mode operation is enabled.

Switch the appliance off then on again.

3.2

Description of the SCB-01 PCB

The expansion board SCB-01 has the following features:

0–10 V output connection for a PWM system pump Two potential-free contacts for status notification

Important

If the boiler is fitted with the SCB-01 board, then this is automatically recognised by the automatic control unit of the boiler. On removing this board, the boiler will show an error code. To prevent this error, carry out an auto-detect immediately after removing this board.

For more information, see Carrying out an auto-detect, page 18

Fig.2 SCB-01 PCB

AD-0000660-01

Status

C No

Status

C No

0 -10

SCB-01

3 Description of the product

8 7698983 - v.02 - 17102018

4 User instructions

4.1 Use of the control panel

4.1.1 Browsing in the menus

Important

Depending on the devices or control PCBs connected, the control panel shows selection options in some menus. First, select a device, control PCB or zone to view or amend a setting.

1. Press any key to activate the controller from the stand-by screen.

2. Access the available menu options by pressing the two keys on the right simultaneously.

Tab.3 Possible menu choices

Information Menu

User menu

Installer Menu

Manual mode menu

Failure Menu

Hour Run Meters / Timer Program / Clock menu

PCB menu

(1)

(1) The icon is displayed only if an optional control PCB has been instal

led.

3. Press the key to move the cursor to the right.

4. Press the key to move the cursor to the left.

5. Press the key to confirm selection of the required menu or parameter.

6. Press the or key to modify the value.

7. Press the key to confirm the value.

Fig.3

Step 1

MW-3000377-02

Fig.4 Step 2

MW-3000299-01

Fig.5 Step 3

MW-3000300-02

Fig.6 Step 4

MW-3000301-02

Fig.7 Step 5

MW-3000302-01

Fig.8 Step 6

MW-3000303-01

Fig.9 Step 7

MW-3000304-01

4 User instructions

7698983 - v.02 - 17102018 9

8. Press the h key to go back to the main display.

Important The screen will return to stand-by if no key is pressed for three minutes.

4.2 Setting the language and time

Important First set the desired language, then the correct time, day and date before further use of the control panel.

4.2.1 Setting the language

1. Navigate to the User menu.

2. Press the key to open the User menu.

3. Keep pressing the key until is displayed.

4. Press the key to confirm the selection.

5. Keep pressing the key until is displayed.

6. Press the key to confirm the parameter.

7. Keep pressing the key until the required language code is displayed.

8. Press the key to confirm the choice of language.

9. Press the h key repeatedly or press and hold the h key to return to the main display.

4.2.2 Setting the time and date

1. Navigate to the Counter menu.

Fig.10

Step 8

MW-3000305-01

Fig.11 Step 2

MW-3000309-01

Fig.12 Step 3

MW-3000390-01

Fig.13 Step 4

MW-3000333-01

Fig.14 Step 5

MW-3000348-01

Fig.15 Step 6

MW-3000349-01

Fig.16 Step 7

MW-3000419-03

Fig.17 Step 8

MW-3000447-03

Fig.18 Step 9

MW-3000311-01

4 User instructions

10 7698983 - v.02 - 17102018

2. Press the key to open the counter menu.

3. Keep pressing the key until the Time display menu is displayed.

Press the key to access the hours.

5. Press the key to access the following parameters:

Minutes Day Month Year

6. Press the key to confirm the parameter.

7. Press the key or to change the value.

8. Press the key to confirm the value.

9. Press the h key multiple times to go back to the main display.

4.3

Changing the central heating flow temperature

The central heating flow temperature can be raised or lowered separately from the heating requirement.

Important The central heating flow temperature can only be adjusted in this way if an on/off thermostat is used.

1. Press the key to select the central heating flow temperature.

2. Press the key to access the central heating flow temperature.

Fig.19

Step 2

MW-3000320-01

Fig.20 Step 3

MW-3000393-01

Fig.21 Step 4

MW-3000353-01

Fig.22 Step 5

MW-3000446-01

Fig.23 Step 6

MW-3000354-01

Fig.24 Step 7

MW-3000355-01

Fig.25 Step 8

MW-3000354-01

Fig.26 Step 9

MW-3000397-01

Fig.27 Step 1

MW-3000366-01

Fig.28 Step 2

MW-3000367-01

4 User instructions

7698983 - v.02 - 17102018 11

+ 25 hidden pages

REMEHA Quinta Ace SCB-01 Installation And User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual