Remeha P320-7 Technical Specifications
Boiler type :
P320 - 7
Issue Date :
June 2012
MODEL : P320
No of SECTIONS : 7
Rated Output kW :
180 - 230
Efficiency % : NCV Full load (³)
88
Weight (dry) kgs :
980
Seasonal Efficiency : % GCV
84
Overall Dim WxHxD mm :
796 x 1387 x 1471
Radiated Losses % : *
0.11
BURNER TYPE
Pressure Jet
Fuel Available :
Nat Gas
Oil (35sec)
Dual Fuel
Fuel Consumption:
Check burner details
22.15 Kg/hr ##
Noise levels dB(A) :
Check burner details
Min Op Gas Press mbar :
Check burner details
HYDRAULICS
Water Content ltrs :
156
Min Return Temp °C
50
Resist @ 11°C ∆t mbar :
56.00
Connection Size :
Resist @ 20°C ∆t mbar :
16.94
Std Operating Temp °C :
80
Nom Flow Rate @ 11° C ∆t l/s :
Max Operating Temp °C :
Nom Flow Rate @ 20° C ∆t l/s :
2.75
High Limit Set Point °C :
110
Min Flow Rate l/s : #
1.21
Max Op Press bars :
6
Test Press bar :
As per Assembly
Manual
FLUE
Diameter mm :
200
Flue Gas Flow kgs/hr Gas : (¹)
410
Flue Type :
Conventional
Flue Gas Flow kgs/hr Oil : (¹)
391
Chamber Resist. mbar :
+ 1.6
Flue Gas Temperature °C : (²)
<210
ELECTRICAL
Voltage :
230.1.50
Note: 1ph burners obtain thei r
power supply via the boiler.
Fuse rating amps :
10Amp
3ph burners require a 3ph
supply + a 1ph to the boiler.
CONTROL OPERATION
Standard :
On / Off Thermostat
Temperature indication
L/O lamp
High limit Thermostat
Volt free run/lock indication
On/Off switch
High / Low
3 Position Switch Auto/Man/Test
10amp CB
Optional :
Hours Run Meters
Modulating(via burner)
TECHNICAL SPECIFICATION SHEET
Quick reference specification sheet full details can be found in the P320 series Installation/Service guide.
General Details
Corrosion resistant cast iron sectional boiler, jointed by conical nipples and ceramic rope, designed
with three passes for high efficiency and low NOx emission. Large insulated door (hinged left or right)
allowing easy access for cleaning. Powder coated enamel steel casing c/w fibreglass insulation.
All of the P320 Boiler Range can be supplied un-assembled or pre-assembled for delivery to site.
CE approved. Boiler Efficiency data to 92/42-EEC
2½”Flanged
5.0
90
(¹) Boiler at full output average temperature 80/60°c (70°c mean)
Boiler temperature: 80 °C, Ambient temperature: 20 °C
(²)
(³) 70°c average temperature
* Maintenance consumption refer to boiler installation/service manual
# Based on ∆t of 45°
## @ 12 bar pump pressure
Ours is a policy of continuous development, we therefore reserve the right to alter specifications without prior
notification. Remeha Commercial accept no liability for any loss or damage rising from any errors or omissions
that may be inadvertently contained in this specification sheet.
Loading...