Raymarine RAYCHART 435, RAYCHART 435I User Manual
WAYPOINT 001
WAYPOINT 002
WAYPOINT 003
WAYPOINT 004
50°21,966'N
001°20,368'W
WAYPOINT 005
--:--
TIME
STOP
FOLLOW
D6277-1
Document Number 86080-1
WAYPOINT LIST
SYMBOL NAME
GOTO WAYPOINT
Press GOTO to display Function Bar
Select GOTO WAYPOINT function to display Waypoint List
SYSTEM SET UP
Use horizontal trackpad movements to highlight SYSTEM SET UP
PAGE - Selects Setup options and display mode.
Press to display Setup Function Bar and use horizontal trackpad
movements to highlight required option. Press ENTER to select
Press PAGE again repeatedly to cycle through display modes
Press ENTER to select
----
POSITION
BRG _186°T RNG _21.0NM
DATE
GPS
SET UP
TRACK
SET UP
CHART
SET UP
SYSTEM
SET UP
Use vertical trackpad movements to select parameter
STARTS GOTO, "CLEAR" TO QUIT
TRACKPAD SELECTS WPT, "ENTER"
GOTO
WAYPOINT
Use trackpad to highlight required waypoint
Use horizontal trackpad movements to change setting
Press ENTER to implement GOTO WAYPOINT function
CHART SET UP
Press ENTER to implement change
Use horizontal trackpad movements to highlight CHART SET UP
Press ENTER to select
MOVE CURSOR, "ENTER" TO START
GOTO CURSOR, "CLEAR" TO QUIT
GOTO
CURSOR
GOTO CURSOR
Press GOTO to display Function Bar
Select GOTO CURSOR function
GPS
SET UP
TRACK
SET UP
CHART
SET UP
SYSTEM
SET UP
Press ENTER to place a temporary waypoint and start the GOTO
Use vertical trackpad movements to select parameter
Use horizontal trackpad movements to change setting
Press ENTER to implement change
TRACKPAD SELECTS PORT, "ENTER"
STARTS GOTO, "CLEAR" TO QUIT
GOTO
PORT
- The Port List is displayed
Use trackpad to highlight required port
GOTO PORT
Press GOTO to display Function Bar
Select GOTO PORT function
GPS
TRACK
CHART
SYSTEM
TRACK SET UP
Use horizontal trackpad movements to highlight TRACK SET UP
Press ENTER to select
Press ENTER to start the GOTO
SET UP
SET UP
SET UP
SET UP
Use horizontal trackpad movements to select INTERVAL
Use vertical trackpad movements to change setting
Press ENTER to save value
Use horizontal trackpad movements to highlight TRACK OFF
Press ENTER to start track - text indicates TRACK ON
or
STOP
GOTO
Select STOP GOTO or STOP FOLLOW (as appropriate)
Press ENTER to stop the GOTO
To stop a GOTO
Press GOTO to display Function Bar (or move cursor over any
waypoint in the current route)
SMARTROUTE
To convert a track to a route, select MAKE INTO ROUTE
Press ENTER to convert to a (reversed) route
- The dotted line from your vessel to the target disappears
Man OverBoard (MOB)
Press and hold GOTO for at least two seconds
GPS
SET UP
TRACK
SET UP
CHART
SET UP
SYSTEM
SET UP
Press ENTER to display the GPS Status page
GPS SET UP and Status
Use horizontal trackpad movements to highlight GPS SET UP
Press ENTER to display the Differential GPS Set Up page (RC420D)
- Waypoint 0999 is created and marked with MOB symbol
- Status Bar shows bearing and range to the MOB position,
elapsed time since initiated and Course Over Ground data
Use vertical trackpad movements to select parameter
Use horizontal trackpad movements to change setting
Press ENTER to implement change
MORE¬
WAYPOINTS
FIND SHIP ROUTES
POWER
Press and hold until unit beeps to turn on display
Press once to adjust lighting & contrast.
Function Bar
Press ENTER to display primary Function Bar (as shown here)
Use trackpad to highlight function then ENTER to select
Elipses (...) after the text indicate further options available
by highlighting then pressing ENTER
Press and hold for 3 seconds to turn off display
Trackpad
RANGE
Adjusts chart scale
Displayed vertical distances shown in Status Bar (top of screen)
ENTER
Confirms selection and (if appropriate) clears current
functions. It either performs the selected task and
Controls cursor position on screen and highlights functions
accepts changes, or confirms selection of more options
- Press top of key to increase the chart range
CLEAR
- Press bottom of key to decrease the chart range
- Press and hold to change the scale rapidly
Cancels operation in progress and returns to previous display
Deletes a highlighted item
Bridge Card - RayChart 435 Chartplotter
Press
to display CDI
Press to display
BDI
Press
D6278-1
to display
Waypoint Data
BRG 231°T
From Chart Display
Press PAGE to display Set Up functions
CSR 48°30.367'N
SIM OV NU
Display Modes
Status Bar
Tide Current
Port Services
RNG 40.91nm
EXMOUTH
POS 1°35.636'W
TOPSHAM
EXETER
TEIGNMOUTH
128 nm
Press
ISLE O
HARBOUR
CAP DE
PORTLAND
DARTMOUTH
TORQUAY
SALCOMBE
PLYMOUTH
ENPORT
to return to
Chart display
Tide Height
LA HAGUE
Cursor
ALDERNEY
GUERNSEY
PORTB
JERSEY
Buoy
GPS
SETUP
TRACK
SETUP
CHART
SETUP
SETUP
SYSTEM
to chart display
press GOTO to return
Note: In any display mode,
Press to display
Time/Date
information
RNG 40.91nm
BRG 231°T
ISLE O
HARBOUR
PORTLAND
CAP DE
LA HAGUE
PORTB
JERSEY
ALDERNEY
Press
to display
Navigation Data
NAME
ROUTE
C
RNG 40.91nm
BRG 231°T
CSR 48°30.367'N
POS 1°35.636'W
1 nm
SIM OV NU
Chart Display
Chart Range
T
T
WESTHARBOR
Chart Boundary -
T
Nav-chart card.
®
Indicates further detail is
available inside. Shown when using
Navionics
Waypoint
Vessel's Position
MORE¬
WAYPOINTS
FIND SHIP ROUTES
Primary Function Bar
Press ENTER to display
Press CLEAR to remove
Press ENTER to display Primary Function Bar
Press ENTER to display Primary Function Bar
Waypoint List Route List
CSR 48°30.367'N
POS 1°35.636'W
128 nm
SIM OV NU
Select ROUTES, then select MORE and press ENTER
Select ROUTE LIST and press ENTER
RNG 40.91nm
BRG 231°T
CSR 48°30.367'N
POS 1°35.636'W
128 nm
SIM OV NU
Select WAYPOINTS
Select WAYPOINT LIST
ROUTE LIST
EXMOUTH
TORQUAY
TOPSHAM
EXETER
TEIGNMOUTH
ENPORT
ISLE O
PORTLAND
WPT 001
WAYPOINT LIST
EXMOUTH
TORQUAY
TOPSHAM
SYMBOL NAME
EXETER
TEIGNMOUTH
ENPORT
DARTMOUTH
1 ROUTE 01
2 -
SALCOMBE
PLYMOUTH
HARBOUR
CAP DE
WPT 002
WPT 003
WPT 004
DARTMOUTH
SALCOMBE
PLYMOUTH
GUERNSEY
3 -
4 -
5 -
PORTB
LA HAGUE
JERSEY
ALDERNEY
GUERNSEY
WPT 005
POSITION 50°21.966'N
001°20.368'W
BRG 186° T RNG 21.0 nm
DATE 13/10/99 TIME 15:30
ERASE
ROUTE
SHOW
ROUTE
TRANSFER
WPT/ROUTE
MAKE NEW
WAYPOINT
EDIT
WAYPOINT
GOTO
WAYPOINT
Loading...