Raymarine RAYCHART 320 User Manual
Distributed by
Any reference to Raytheon or
RTN in this manual should be
interpreted as Raymarine.
The names Raytheon and RTN
are owned by the
Raytheon Company.
MARKS/MOB
Controls placing waypoints and Man Overboard function.
- Press to access Waypoint soft keys; use soft keys to Place
Waypoint at cursor or vessel position. Press ENTER to finish.
- Press and hold for 2 seconds to activate or cancel MOB.
ALARMS
Use to set up alarm parameters.
- Press for display alarm list.
- Use Trackpad to select alarm.
- Use up down soft keys to set alarm limits.
- Press ENTER to finish
ALARMS SET UP
ARRIVAL ALARM
OFF TRACK ALARM
ANCHOR ALARM
COUNTDOWN TIMER
ALARM CLOCK
ALARM
OFF ON
SELECT DISTANCE
0.01nm
ON
OFF
00:10:00
OFF
POWER
Press and hold to switch on display.
Press for 3 seconds to turn off display.
POWER
Press momentarily to access lighting and contrast.
OFF
O
F
F
LIGHT CONTRAST
50%
128nm
TEIGNMOUTH
ENPORT
CSR 50°50^05W BRG 309°T
POS 001°06^00W COG 37.84nm
EXETER
TOPSHAM
EXMOUTH
TORQUAY
PLYMOUTH
DARTMOUTH
SALCOMBE
GOTOROUTE SCREEN FIND SHIP
PORTLAND
HARBOUR
ISLE O
Soft keys
Press to select option, or to highlight option or slider.
Labels change when you press soft/dedicated key.
Elipses (...) after the text indicate that pressing soft key
leads to a further display of soft key options.
ENTER
Press to confirm selection and (if appropriate) clear
current soft key labels. It performs the selected task,
accepts changes, or leads to display of more options.
When cursor text is displayed, cursor takes control
of the object.
When arrow-head cursor symbol is displayed, the
object under cursor control is dropped.
DISPLAY
Controls display mode pages.
- Press repeatedly to toggle through display modes.
- Press and hold for 2 seconds for chart display.
See over for display modes.
Note: Where multiple pages are available, use associated
soft keys to display.
RANGE
Controls range scale.
Range scale is shown in the Status Bar.
- Press top of key to increase the range scale.
- Press bottom of key to decrease the range scale.
- Press and hold to change the scale rapidly.
TRACKPAD
Controls cursor position on the screen, and also the sliders,
setup options and text entry.
Hold the trackpad down to move the cursor rapidly.
MENU
Provides access to setup options.
SYSTEM
SET UP¬
Press soft key to display required setup menu, then use
trackpad to select option and soft key to change setting.
Press ENTER to close menu and CLEAR to finish.
CHART
SET UP¬
TRACK
SET UP¬
GPS
SET UP¬
D5834-1
Select a slider using the soft key or trackpad left/right.
Adjust slider using trackpad up/down.
Press ENTER to finish.
CLEAR
Cancels operation in progress and returns to the
previous display.
Bridge Card Raychart 320 Chartplotter
86052_3
Loading...