Raymarine Ray50, Ray60, Ray70 Mounting And Getting Started

Download

Page 1

ounting and Getting Started

MULTILINGUAL

Ray50 / Ray60 / Ray70

Page 2

ENGLISH

Documentnumber:88033-0.1 Date:09-2014

Page 3

Makingadistresscall

Inanemergencyyoucanuseyourunittomakean automaticDSCdistresscall.

Withthespringloadedcoveropen:

Dxxxxx-1

1.PressandholdtheDISTRESSbuttonfor3seconds.

OncetheDISTRESSbuttonispresseda3second countdownwillbegin,whenthecountdownreaches zerotheDSCdistresscallistransmitted.

Thedistresscallisrepeatedautomaticallyuntilitis acknowledged.

2.Onceanacknowledgementisreceived,orifno acknowledgementisreceivedfor15seconds;press andholdthePTTbutton.

3.Slowlyandclearlyspeakthedetailsofthedistress inthefollowingformat:

MAYDA Y,MAYDA Y,MAYDA Y

Thisis<statenameofvessel3times>

MAYDA Y<statenameofvessel1time>

Mypositionis<statelatitudeandlongitude,ortrue

bearinganddistancefromaknownpoint.>

Iam<statenatureofdistresse.g.sinking,onre etc.>

Ihave<statenumberofpersonsonboardandany otherinformation—drifting,aresredetc.>

IREQUIREIMMEDIA TEASSISTANCE

OVER

4.ReleasethePTTbutton.

MakingaMaydaycall

Inanemergencyyoucanuseyourunittomakea Maydaycall.

1.Pressthe16PLUSbutton.

2.PressandholdthePTTbutton.

3.Slowlyandclearlyspeakthedetailsofthedistress:

MAYDA Y,MAYDA Y,MAYDA Y

Thisis<statenameofvessel3times>

MAYDA Y<statenameofvessel1time>

Mypositionis<statelatitudeandlongitude,ortrue

bearinganddistancefromaknownpoint.>

Iam<statenatureofdistresse.g.sinking,onre etc.>

Ihave<statenumberofpersonsonboardandany otherinformation—drifting,aresredetc.>

IREQUIREIMMEDIA TEASSISTANCE

OVER

4.ReleasethePTTbutton.

5.Ifanacknowledgementisnotreceivedthenrepeat steps2to4above.

Importantinformation

Warning:Readtheexpanded handbook

Thisdocumentisanabbreviated("quick start")handbook,containingonlythebasic informationrequiredtogetyoustarted withyournewproduct.Forthecomplete documentationandsafetyinformationfor yourproduct,pleaserefertotheexpanded handbook,availableontheRaymarine website(www.raymarine.com).

Warning:Productinstallation andoperation

Thisproductmustbeinstalledandoperated inaccordancewiththeinstructions provided.Failuretodosocouldresultin personalinjury,damagetoyourvessel and/orpoorproductperformance.

Warning:Potentialignition source

ThisproductisNOTapprovedforusein hazardous/ammableatmospheres.Do NOTinstallinahazardous/ammable atmosphere(suchasinanengineroomor nearfueltanks).

Warning:12V oltdconly

Thisproductmustonlybeconnectedtoa

12voltdcpowersource.

Warning:Positiveground systems

Donotconnectthisunittoasystemwhich haspositivegrounding.

Warning:Switchoffpower supply

Ensurethevessel’spowersupplyis switchedOFFbeforestartingtoinstallthis product.DoNOTconnectordisconnect equipmentwiththepowerswitchedon, unlessinstructedinthisdocument.

Page 4

Warning:Chassisgrounding

DoNOTgroundthisproductusingthe chassisgroundterminal.

Groundingthisproducttoavessel’sRF groundmaycausegalvaniccorrosion.

Warning:Antennaisolation

Topreventgalvaniccorrosionyourantenna mustbeisolatedfromanyvesselmetalwork usingasuitableinsulatede.g.plastic, mountingbracket.

Warning:FCCWarning(Part

15.21)

Changesormodicationstothisequipment notexpresslyapprovedinwritingby RaymarineIncorporatedcouldviolate compliancewithFCCrulesandvoidthe user’sauthoritytooperatetheequipment.

Warning:Maximum PermissibleExposure

Failuretoobservetheseguidelines mayexposethosewithinthemaximum permissibleexposure(MPE)radiusto RFradiationabsorptionthatexceedsthe FCCMPElimit.Itistheradiooperator’s responsibilitytoensurethatnoonecomes withinthisradius.

Foroptimalradioperformanceandminimal humanexposuretoradiofrequency electromagneticenergy,makesurethe antennais:

•connectedtotheradiobeforetransmitting

•locatedwhereitwillbeawayfrompeople

•locatedatleast1.5meters(5feet)from theradio’smainunit

Caution:Powersupply protection

Wheninstallingthisproductensurethe powersourceisadequatelyprotectedby meansofasuitably-ratedfuseorautomatic circuitbreaker.

Caution:Performregularradio checks

Performregularradiocheckswhenusing yourvessel,asrecommendedinradio trainingandcerticationschemesand radioequipmentrulesofuse.

Caution:Ensureproperradio use

UndernocircumstancesshouldaDSC distressalertbesentfromyourradiofor testpurposes.Suchactionisaviolationof rulesofuseforradioequipment,andcan resultinheavynes.

Caution:Cleaning

Whencleaningthisproduct:

•DoNOTwipethedisplayscreenwith adrycloth,asthiscouldscratchthe screencoating.

•DoNOTuseabrasive,oracidor ammoniabasedproducts.

•DoNOTuseajetwash.

Wateringress

Wateringressdisclaimer

Althoughthewaterproofratingcapacityofthis productmeetsthestatedIPXstandard(refertothe product’sT echnicalSpecication),waterintrusionand subsequentequipmentfailuremayoccuriftheproduct issubjectedtocommercialhigh-pressurewashing. Raymarinewillnotwarrantproductssubjectedto high-pressurewashing.

Disclaimer

Raymarinedoesnotwarrantthatthisproductis error-freeorthatitiscompatiblewithproducts manufacturedbyanypersonorentityotherthan Raymarine.

Raymarineisnotresponsiblefordamagesorinjuries causedbyyouruseorinabilitytousetheproduct,bythe interactionoftheproductwithproductsmanufactured byothers,orbyerrorsininformationutilizedbythe productsuppliedbythirdparties.

Ray50/Ray60/Ray70

Page 5

FCC ComplianceStatement(Part15.19)

ThisdevicecomplieswithPart15oftheFCCRules. Operationissubjecttothefollowingtwoconditions:

1.Thisdevicemaynotcauseharmfulinterference.

2.Thisdevicemustacceptanyinterferencereceived, includinginterferencethatmaycauseundesired operation.

FCCInterferenceStatement(Part15.105 (b))

Thisequipmenthasbeentestedandfoundtocomply withthelimitsforaClassBdigitaldevice,pursuantto Part15oftheFCCRules.

Theselimitsaredesignedtoprovidereasonable protectionagainstharmfulinterferenceinaresidential installation.Thisequipmentgenerates,uses,andcan radiateradiofrequencyenergyand,ifnotinstalled andusedinaccordancewiththeinstructions,may causeharmfulinterferencetoradiocommunications. However,thereisnoguaranteethatinterferencewill notoccurinaparticularinstallation.Ifthisequipment doescauseharmfulinterferencetoradioortelevision reception,whichcanbedeterminedbyturningthe equipmentoffandon,theuserisencouragedtotry tocorrecttheinterferencebyoneofthefollowing measures:

1.Reorientorrelocatethereceivingantenna.

2.Increasetheseparationbetweentheequipment andreceiver.

3.Connecttheequipmentintoanoutletona circuitdifferentfromthattowhichthereceiveris connected.

4.Consultthedealeroranexperiencedradio/TV technicianforhelp.

Licensing

Priortousingthisproductpleasecheckyournational requirementsforbothoperatorsandequipment licensing.

StationLicence

FCCstationlicenserequirement

AnFCCShipRadioStationLicenseandCallSignare notrequiredformostrecreationalvesselstravellingin USwaters.However,youmustobtainalicenseifyour vesseltravelstoforeignports.

ShipsthatuseMF/HFsingleside-bandradio,satellite communications,ortelegraphymustbelicensedbythe FCC.YoucanobtainaStationLicensebylingFCC Form605,whichisavailablefromtheFCCwebsite listedabove.

IndustryCanada

IndustryCanadalicenserequirement

Youdonotneedalicensetooperatethisproductwithin sovereignwatersofCanadaortheUS.Y ouwillneeda licensetooperatethisradiooutsideofCanadaorthe US.T oobtainIndustryCanadalicensinginformation, contactthenearesteldorregionalofce,orwrite:

IndustryCanadaRadioRegulatoryBranch

Attention:DOSP

300SlaterStreet

Ottawa,Ontario

Canada,KIAOC8

Europeanlicensingrequirements

RegulationsinsomeareasrequirethatanOperator’s licenseisobtainedbeforeoperatingaVHFradio.Itis yourresponsibilitytodeterminewhetheralicenseis requiredinyourareabeforeoperatingthisequipment.

Additionalinformation–Ray50

Thefollowingadditionalinformationisrequiredfor completingalicenseapplicationinCanadaandtheUS.

IndustryCanada certicationnumber

4069B-RAY50D

FCCID

PJ5–RAY50

FCCT ypeaccepted

Parts2,15and80

Outputpower1watt(low)and25watt(high)

ModulationFM

Frequencyrange155.500MHzto163.275MHz

Additionalinformation–Ray60

Thefollowingadditionalinformationisrequiredfor completingalicenseapplicationinCanadaandtheUS.

IndustryCanada certicationnumber

4069B-RAY60D

FCCID

PJ5–RAY60

FCCT ypeaccepted

Parts2,15and80

Outputpower1watt(low)and25watt(high)

ModulationFM

Frequencyrange155.500MHzto163.275MHz

Additionalinformation–Ray70

Thefollowingadditionalinformationisrequiredfor completingalicenseapplicationinCanadaandtheUS.

IndustryCanada certicationnumber

4069B-RAY70D

FCCID

PJ5–RAY70

IndustryCanada

ThisdevicecomplieswithIndustryCanada License-exemptRSSstandard(s).

Operationissubjecttothefollowingtwoconditions:

1.Thisdevicemaynotcauseinterference;and

2.Thisdevicemustacceptanyinterference,including interferencethatmaycauseundesiredoperation ofthedevice.

ThisClassBdigitalapparatuscomplieswithCanadian ICES-003.

Le prés

ent appareil est conforme aux CNR d'Industrie

Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur

de l'appareil doit accepter tout brouillage

radioélectrique subi, même si le brouillage

est susceptible d'en compromettre le fonctionnement

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Page 6

FCCT ypeaccepted

Parts2,15and80

Outputpower 0.8watt(low)and23watt(high)

ModulationFM Frequencyrange15 6.025MHzto157.425MHz(TX)

MaritimeMobileServiceIdentity(MMSI)

Thisproductisaclass“D”DigitalSelectiveCalling (DSC)device.

A9digitMMSInumberisrequiredtooperateDSC equipment.Insomeareas,aradiooperatorlicenseis requiredbeforeanMMSInumbercanbeissued.

Note:Y oucanrequestanMMSInumberfromthe sameagencythatissuesradioorshipradiolicenses inyourarea.Onceobtained,youcanprogramthe MMSInumberintoyourproductbyfollowingthe instructionsuppliedwiththeproduct.

Onceobtained,youcanprogramtheMMSInumber intoyourproductusingtheinstructionsprovidedinthis handbook.

Ifregulationsinyourareadonotpermityoutoprogram theMMSInumberyourself,yourRaymarinedealercan programthenumberforyou.

ObtaininganMMSInumberintheUnitedStates

YoucanrequestanMMSInumberfromtheFCCwhen youapplyforaStationLicense.Ifyourvesseldoes notrequirealicense,youmayobtainanMMSIby contactingBoatUSwww.boatus.com.

ObtaininganMMSInumberinCanada

YoucanobtainanMMSInumberfromyournearest IndustryCanadaOfce.

ObtaininganMMSInumberinEuropeandrestof world

AmMMSInumbershouldberequestedfromthesame agencythatissuesradiooperatorlicensesinyourarea.

AutomaticTransmitterIdentication System(ATIS)

YourproductincludesA TISfunctionalityforuseonthe inlandwaterwaysofcontractinggovernmentsofthe

“RegionalArrangementontheRadiocommunication ServiceforInlandWaterways”—alsoknownas “RAINWAT”.

ATISaddsdataattheendofradiotransmissionsthat identiesyourstation.ATISoperationcanbeturnedon oroffasneededviatheradio’smenu.

AnATISIDcanbeobtainedfromthesameagencythat issuesradiooperatorlicensesinyourarea.

YourATISIDshouldbeprogramedintoyourproduct usingtheinstructionsprovidedinthishandbook.

Note:ContractingRAINWATcoutriesinclude: Austria,Belgium,Bulgaria,Croatia,theCzech Republic,France,Germany ,Hungary,Luxembourg, Moldova,Montenegro,theNetherlands,Poland, Romania,Serbia,theSlovakRepublicand Switzerland.

Note:WhenA TISisenabled,certainprograming stepshavebeenimplementedtoprotecttheintegrity oftheRAINWATagreement,includingtheblocking ofDSCfunctionswhenATISisenabled.

EMCinstallationguidelines

Raymarineequipmentandaccessoriesconformto theappropriateElectromagneticCompatibility(EMC) regulations,tominimizeelectromagneticinterference betweenequipmentandminimizetheeffectsuch interferencecouldhaveontheperformanceofyour system

CorrectinstallationisrequiredtoensurethatEMC performanceisnotcompromised.

Note:InareasofextremeEMCinterference, someslightinterferencemaybenoticedonthe product.Wherethisoccurstheproductandthe sourceoftheinterferenceshouldbeseparatedby agreaterdistance.

ForoptimumEMCperformancewerecommendthat whereverpossible:

•Raymarineequipmentandcablesconnectedtoitare:

–Atleast1m(3ft)fromanyequipmenttransmitting

orcablescarryingradiosignalse.g.VHFradios, cablesandantennas.InthecaseofSSBradios, thedistanceshouldbeincreasedto7ft(2m).

–Morethan2m(7ft)fromthepathofaradarbeam.

Aradarbeamcannormallybeassumedtospread 20degreesaboveandbelowtheradiatingelement.

•Theproductissuppliedfromaseparatebatteryfrom thatusedforenginestart.Thisisimportanttoprevent erraticbehavioranddatalosswhichcanoccurifthe enginestartdoesnothaveaseparatebattery.

•Raymarinespeciedcablesareused.

•Cablesarenotcutorextended,unlessdoingsois detailedintheinstallationmanual.

Note:Whereconstraintsontheinstallation preventanyoftheaboverecommendations,

alwaysensurethemaximumpossibleseparation betweendifferentitemsofelectricalequipment,to providethebestconditionsforEMCperformance throughouttheinstallation

AntennamountingandEMEexposure

Ensurethattheantennaisconnectedtotheradio beforetransmission.

RaymarinedeclaresaMaximumPermissibleExposure (MPE)radiusof1.5metres(4.9ft)(perOETBulletin

65)forthissystem,assuming23wattsoutputtoan

omnidirectionalantennaof3dBigainorless.

Forwatercraftwithsuitablestructures,theantenna basemustbeatleast3.5metres(11.5ft)abovethe maindecktomeettheMPEforpersonsupto2metres

Ray50/Ray60/Ray70

Page 7

(6.6ft)tall.Forwatercraftwithoutsuchstructures,the antennamustbemountedsothatitsbaseisaminimum of1.5metres(4.9ft)verticallyfromheadsofallpersons.

Theantennamustbeisolatedfromthevessel’s metalworkusinganinsulated(e.g.plastic)mounting bracket.

Connectionstootherequipment

Requirementforferritesonnon-Raymarinecables

IfyourRaymarineequipmentistobeconnectedtoother equipmentusingacablenotsuppliedbyRaymarine,a suppressionferriteMUSTalwaysbeattachedtothe cableneartheRaymarineunit.

Declarationofconformity

RaymarineUKLtd.declaresthatthisproductis compliantwiththeessentialrequirementsofR&TTE directive1999/5/EC.

TheoriginalDeclarationofConformitycerticate maybeviewedontherelevantproductpageat

www.raymarine.com.

Productdisposal

DisposeofthisproductinaccordancewiththeWEEE Directive.

TheWasteElectricalandElectronicEquipment (WEEE)Directiverequirestherecyclingofwaste electricalandelectronicequipment.WhilsttheWEEE DirectivedoesnotapplytosomeRaymarineproducts, wesupportitspolicyandaskyoutobeawareofhow todisposeofthisproduct.

Warrantyregistration

ToregisteryourRaymarineproductownership,please visitwww.raymarine.comandregisteronline.

Itisimportantthatyouregisteryourproducttoreceive fullwarrantybenets.Yourunitpackageincludesa barcodelabelindicatingtheserialnumberoftheunit.

Youwillneedthisserialnumberwhenregisteringyour productonline.Youshouldretainthelabelforfuture reference.

IMOandSOLAS

Theequipmentdescribedwithinthisdocumentis intendedforuseonleisuremarineboatsandworkboats NOTcoveredbyInternationalMaritimeOrganization (IMO)andSafetyofLifeatSea(SOLAS)Carriage Regulations.

Technicalaccuracy

Tothebestofourknowledge,theinformationinthis documentwascorrectatthetimeitwasproduced. However,Raymarinecannotacceptliabilityforany inaccuraciesoromissionsitmaycontain.Inaddition, ourpolicyofcontinuousproductimprovementmay changespecicationswithoutnotice.Asaresult, Raymarinecannotacceptliabilityforanydifferences betweentheproductandthisdocument.Please checktheRaymarinewebsite(www.raymarine.com)to ensureyouhavethemostup-to-dateversion(s)ofthe documentationforyourproduct.

Applicableproducts

Thisdocumentisapplicabletothefollowingproducts:

Name

Part numberFeatures

E70243Ray50

•SeaTalk

ng®

•NMEA0183

•Passive speaker connection

E70245Ray60

•SeaTalk

ng®

•NMEA0183

•Passive speaker connection

•Upto2 stations

E70251Ray70

•SeaTalk

ng®

•NMEA0183

•Passive speaker connection

•Upto2 stations

•Built-inAIS receiver

•Built-in GNSS (GPSand GLONASS) receiver

•Loudhailer connection

Page 8

Locationandmounting

Generallocationrequirements

Whenselectingalocationfortheunititisimportantto consideranumberoffactors.

AntennamountingandEMEexposure

Ensurethattheantennaisconnectedtotheradio beforetransmission.

RaymarinedeclaresaMaximumPermissibleExposure (MPE)radiusof1.5metres(4.9ft)(perOETBulletin

65)forthissystem,assuming2 3wattsoutputtoan omnidirectionalantennaof3dBigainorless.

Forwatercraftwithsuitablestructures,theantenna basemustbeatleast3.5metres(11.5ft)abovethe maindecktomeettheMPEforpersonsupto2metres (6.6ft)tall.Forwatercraftwithoutsuchstructures,the antennamustbemountedsothatitsbaseisaminimum of1.5metres(4.9ft)verticallyfromheadsofallpersons.

Theantennamustbeisolatedfromthevessel’s metalworkusinganinsulated(e.g.plastic)mounting bracket.

Compasssafedistance

Topreventpotentialinterferencewiththevessel's magneticcompasses,ensureanadequatedistanceis maintainedfromtheproduct.

Whenchoosingasuitablelocationfortheproductyou shouldaimtomaintainthemaximumpossibledistance fromanycompasses.Typicallythisdistanceshouldbe atleast1m(3ft)inalldirections.Howeverforsome smallervesselsitmaynotbepossibletolocatethe productthisfarawayfromacompass.Inthissituation, whenchoosingtheinstallationlocationforyourproduct, ensurethatthecompassisnotaffectedbytheproduct whenitisinapoweredstate.

GPSlocationrequirements

Inadditiontogeneralguidelinesconcerningthe locationofmarineelectronics,thereareanumber ofenvironmentalfactorstoconsiderwheninstalling equipmentwithaninternalGPSantenna.

Mountinglocation

•AboveDecksmounting:

ProvidesoptimalGPSperformance.(Forequipment withappropriatewaterproofrating.)

•BelowDecksmounting:

GPSperformancemaybelesseffectiveandmay requireanexternalGPSantennamountedabove decks.

D11537-2

1 .

ThislocationprovidesoptimalGPSperformance (abovedecks).

2 .

Inthislocation,GPSperformancemaybeless effective.

3 .

ThislocationisNOTrecommendedforGPS antenna.

Vesselconstruction

Theconstructionofyourvesselcanhaveanimpact onGPSperformance.Forexample,theproximityof heavystructuresuchasastructuralbulkhead,orthe interioroflargervesselsmayresultinareducedGPS signal.BeforelocatingequipmentwithaninternalGPS antennabelowdecks,seekprofessionalassistance andconsideruseofanexternalGPSantennamounted abovedecks.

Prevailingconditions

Theweatherandlocationofthevesselcanaffectthe GPSperformance.Typicallycalmclearconditions provideforamoreaccurateGPSx.Vesselsat extremenortherlyorsoutherlylatitudesmayalso receiveaweakerGPSsignal.GPSantennamounted belowdeckswillbemoresusceptibletoperformance issuesrelatedtotheprevailingconditions.

Ventilationrequirements

Toprovideadequateairow:

•Ensurethatequipmentismountedinacompartment ofsuitablesize.

•Ensurethatventilationholesarenotobstructed.

•Ensureadequateseparationofequipment.

Mountingsurfacerequirements

Ensureunitsareadequatelysupportedonasecure surface.DoNOTmountunitsorcutholesinplaces whichmaydamagethestructureofthevessel.

Cableroutingrequirements

Ensuretheunitismountedinalocationwhichallows properroutingandconnectionofcables:

•Minimumcablebendradiusof100mm(3.94in)is requiredunlessotherwisestated.

•Usecablesupportstopreventstressonconnectors.

Electricalinterference

Selectalocationthatisfarenoughawayfrom devicesthatmaycauseinterference,suchasmotors, generatorsandradiotransmitters/receivers.

Powersupply

Selectalocationthatisascloseaspossibletothe vessel’sDCpowersupply.Thiswillhelptokeepcable runstoaminimum.

Ray50/Ray60/Ray70

Page 9

Productdimensions

Ray50dimensions

TheRay50canbeushmountedorbracketmounted.

Ray50Flushmountdimensions

168 mm (6.6 in.)

156 mm (6.1 in.)

88.5 mm (3.5 in.) 134 mm (5.3 in.)

59 mm (2.3 in.)

142 mm (5.6 in.)

39.75 mm (1.6 in.)

21.5 mm (0.85 in.) 25 mm (1 in.)

Dxxxxx-1

Ray50Bracketmountdimensions

192.5 mm (7.6 in.)

121 mm (4.8 in.)

173.75 mm (6.8 in.)

25 mm (1 in.)

Dxxxxx-1

Ray60andRay70dimensions

TheRay60andRay70canbeushmountedorbracket mounted.

Ray60andRay70Flushmountdimensions

Dxxxxx-1

199 mm (7.8 in.)

61.6 mm (2.4 in.)

16.6 mm (0.7 in.)

176 mm (6.9 in.)

98.5 mm (3.9 in.)

143 mm (5.6 in.)

74 mm (2.9 in.)

Ray60andRay70Bracketmountdimensions

Dxxxxx-1

133 mm (5.2 in.)

226 mm (8.9 in.)

204.6 mm (8 in.)

25 mm (1 in.)

Fistmicdimensions

68.5 mm (2.7 in.)

36 mm (1.4 in.)

8 mm (0.3 in.)

97.6 mm (3.8 in.)

Dxxxxx-1

TheFistmic’stted,coiledleadcanbeextended comfortablytoapproximately1meter(3.3ft.)

Mountingoptions

Theproductcanbemountedinthefollowing congurations.

Dxxxxx-1

1 2

3 4

1.Tabletopmount

2.Overheadmount

3.Bulkheadmount

4.Flushmount

Page 10

Bracketmounting

Followthestepsbelowtomounttheproductonit’s bracket.

Beforemountingtheunitensurethatyouhave:

•Selectedasuitablelocation,ensuringthereisnothing behindthemountingsurfacethatmaybedamaged whendrilling.

•Identiedthecableconnectionsandroutethatthe cableswilltake.

•Attachedthefrontbezel.

Dxxxxx-1

1.Markthelocationofthebracketmountingholeson

themountingsurface.

2.Drillholesforthemountingxingsusingadrillwith

asuitablesizeddrillbit.

3.Usethexingsprovidedtoattachthebracket securelytothemountingsurface.

4.Attachtheunittothebracketandsecureinplace usingthebracketmountingknobs.

Note:Drillbit,tapsizeandtighteningtorqueis dependentonthethicknessandtypeofmaterialthe unitistobemountedon.

Ray50

Removingthemountingholecovers

BeforetheRay50canbeushmountedthemounting holecoversmustberemoved.

Dxxxxx-1

1.Usingaatbladescrewdriver,insertthetipofthe screwdriverintheslotbetweenthebackofthe coverandtheunit.

2.Gentlyleverthecoverforwardawayfromtheunit.

3.Repeatsteps2and3fortheremainingmounting holecovers.

Drillingoutthemountingholes–Ray50

Beforeushmountingtheproductthemountingholes mustbedrilledout.

Guidesforthemountingholescanbefoundinthe cornersoftheunit,underthemountingholecovers.

x 4

Dxxxxx-1

1.Usingadrillanda4mm(5/32)drillbit,drilloutthe 4mountingholes.

Holesshouldbedrilledfromthefrontoftheunit, takingcarenottodamagetheunitbyapplyingtoo muchforcetothedrill.

FlushmountingtheRay50

ToushmounttheRay50followthestepsbelow.

Beforemountingtheproduct,ensurethatyouhave:

•Selectedasuitablelocation,ensuringthereisnothing

behindthemountingsurfacethatmaybedamaged whendrilling/cutting.

•Identiedthecableconnectionsandroutethatthe

cableswilltake.

•Drilledoutthemountingholesontheunit.

•Removedthemountingholecovers.

Ray50/Ray60/Ray70

Page 11

Dxxxxx-1

1.Checktheselectedlocationfortheunit.Aclear, atareawithsuitableclearancebehindthepanel isrequired.

2.Fixthesuppliedmountingtemplatetotheselected location,usingmaskingorself-adhesivetape.

3.Usingasuitableholesaw(thesizeisindicatedon thetemplate),makeaholeineachcornerofthe cut-outarea.

4.Usingasuitablesaw ,cutalongtheinsideedgeof thecut-outline.

5.Ensurethattheunittsintotheremovedareaand thenlearoundtheroughedgeuntilsmooth.

6.Drill4holesasindicatedonthetemplatetoaccept thexings.

7.Removethebackingsfromthesuppliedgasket.

8.Placethegasketinpositiononthebackoftheunit andpressrmlyontotheange.

9.Connectthepower ,andothercablestotheunit.

10.Slidetheunitintoplaceandsecureusingthexings provided.

11.Attachthemountingholecovers.

Dxxxxx-1

Note:Thesuppliedgasketprovidesasealbetween theunitandasuitablyatandstiffmountingsurface orbinnacle.Thegasketshouldalwaysbeused. Itmayalsobenecessarytouseamarine-grade sealantifthemountingsurfaceorbinnacleisnot entirelyatandstifforhasaroughsurfacenish.

Ray60-Ray70

Drillingoutthemountingholes–Ray60/Ray70

Beforeushmountingtheproductthemountingholes mustbedrilledout.

Guidesforthemountingholescanbefoundinthe cornersoftheunit,underthefrontbezel.

x 4

Dxxxxx-1

1.Usingadrillanda4mm(5/32)drillbit,drilloutthe 4mountingholes.

Holesshouldbedrilledfromthefrontoftheunit, takingcarenottodamagetheunitbyapplyingtoo muchforcetothedrill.

Flushmounting–Ray60/Ray70

ToushmounttheRay60/Ray70followthesteps below.

Beforemountingtheproduct,ensurethatyouhave:

•Selectedasuitablelocation,ensuringthereisnothing

behindthemountingsurfacethatmaybedamaged whendrilling/cutting.

•Identiedthecableconnectionsandroutethatthe

cableswilltake.

•Drilledoutthemountingholesontheunit.

•Removedthefrontbezel.

Page 12

Dxxxxx-1

1.Checktheselectedlocationfortheunit.Aclear, atareawithsuitableclearancebehindthepanel isrequired.

2.Fixthesuppliedmountingtemplatetotheselected location,usingmaskingorself-adhesivetape.

3.Usingasuitableholesaw(thesizeisindicatedon thetemplate),makeaholeineachcornerofthe cut-outarea.

4.Usingasuitablesaw ,cutalongtheinsideedgeof thecut-outline.

5.Ensurethattheunittsintotheremovedareaand thenlearoundtheroughedgeuntilsmooth.

6.Drill4holesasindicatedonthetemplatetoaccept thexings.

7.Removethebackingsfromthesuppliedgasket.

8.Placethegasketinpositiononthebackoftheunit andpressrmlyontotheange.

9.Connectthepower ,andothercablestotheunit.

10.Slidetheunitintoplaceandsecureusingthexings provided.

11.Attachthefrontbezel.

Attachingthefrontbezel–Ray60/Ray70

Afterinstallationthefrontbezelcanbeattached followingthestepsbelow.

Thefollowingprocedureassumesthattheunithas alreadybeenmountedinposition.

1.Orientatethebottom-rightsideofthebezelunder thebottom-rightsideoftheunit,ensuringthatthe clipsalongthebottomedgeofthebezellatchinto position.

Dxxxxx-1

2.Ensurethebezeliscorrectlyalignedwiththeunit, asshown.

3.Applyrmbutevenpressuretothebezelalongthe: i.Outeredges-workfromthesidesupwardsand

thenalongthetopedge,toensurethatitclips securelyintoposition.

ii.Inneredges-ensurethatthebezelsitsat.

4.Checkthatallcontrolbuttonsarefreetooperate.

Fistmic/Handsetmounting

TheFistmicandoptionalHandsetcanbemountedby followingthestepsbelow.WhilstonlytheFistmicis picturedbelowthestepsareidenticalwhenmounting theHandsetusingthemountingclip.

Beforemountingtheunit,ensurethatyouhave:

•Selectedasuitablelocation,ensuringthereisnothing behindthemountingsurfacethatmaybedamaged whendrilling.

•Identiedthecableconnectionsandroutethatthe cableswilltake.

Dxxxxx-1

1.Checktheselectedlocationforthemountingclip,

aclearatareaisrequired,withsufcientspace aroundittoplaceandremovetheFistmic/Handset.

2.Usingapencil,offerupthemountingcliptothe

desiredlocationandmarkthelocationofthescrew holesonthemountingsurface.

3.Drillthemountingholesusingasuitablesizedrillbit.

4.Holdtheclipinplaceandsecureusingthescrews

provided.

5.HooktheFistmic/Handsetovertheclipandgently

pushdownuntilitclicksintoposition.

Ray50/Ray60/Ray70

Page 13

Note:TheFistmiccanonlybehookedand unhookedfromthemountingclipwhenheldvertical.

Dxxxxx-1

Note:Drillbit,tapsizeandtighteningtorqueis dependentonthethicknessandtypeofmaterialthe unitistobemountedon.

Powerconnection

Thepowersupplyshouldbeconnectedasshown below:

12 v dc +

12 v dc -

Dxxxxx-1

7 5

1.Basestation

2.Passivespeakerconnection.

3.NMEA0183wires

4.Loudhailerwires(Ray70only .)

5.In-line10Afuse

6.Redpositivewire

7.Blacknegativewire.

8.Vessel’s12Vdcpowersupply

Warning:12V oltdconly

Thisproductmustonlybeconnectedtoa

12voltdcpowersource.

Warning:Chassisgrounding

DoNOTgroundthisproductusingthe chassisgroundterminal.

Groundingthisproducttoavessel’sRF groundmaycausegalvaniccorrosion.

Grounding

Thisproductisgroundedthroughthe0Vdcnegative wireonthepowercableanddoesnotrequireadrain (shield)tobeconnectedtothebasestation’sground terminal.

Warning:Positiveground systems

Donotconnectthisunittoasystemwhich haspositivegrounding.

Breakers,fusesandcircuitprotection

Theinformationbelowisprovidedasguidancetohelp protectyourproduct.Theexampleillustrationsprovided areforcommonvesselpowerarrangements,ifyouare unsurehowtoprovidethecorrectlevelofprotection thenpleaseconsultaRaymarineauthorizeddealerfor support.

Distributionpanelconnection

Itisrecommendedthatyourproductiswiredthrough yourvessel’sdistributionpanelviaathermalbreaker orfuse.

D13092-1

2 31

1.Vesselpowersupplypositive(+)

2.In-linefuse.(Ifyourproductspowercabledoes nothaveanin-linefusethenanonefuseshould betted.)

3.Productpowercable

4.Vesselpowersupplynegative(-)

5.Vesseldistributionpanel

Batteryconnection

Yourproductmaybewireddirectlytothebatteryusing anin-linefuse.

D13091-1

2 41

1.Vesselpowersupplypositive(+)

2.Vesselpowersupplynegative(-)

3.In-linefuse(Ifyourproductspowercabledoesnot haveabuiltinfusethenanin-linefuseshouldbe tted.)

4.Productpowercable

5.Vesselbattery

Page 14

In-linefuseandthermalbreakerratings

Thefollowingin-linefuseandthermalbreakerratings applytoyourproduct:

In-linefuseratingThermalbreakerrating

10A

7A(ifonlyconnectingone device)

Note:

•Thesuitablefuseratingforthethermalbreaker isdependentonthenumberofdevicesyouare connecting.Ifindoubtconsultanauthorized

Raymarine

dealer.

•Yourproduct’spowercablemayhavettedin-line fuse,ifnotthenyoucanaddanin-linefusetothe positivewireofyourproductspowerconnection.

Sharingabreaker

Wheremorethan1pieceofequipmentsharesa breakeryoumustprovideprotectionfortheindividual circuits.E.g.byconnectinganin-linefuseforeach powercircuit.

D11637-2

4 4

Positive(+)bar

Negative(-)bar

Circuitbreaker

4Fuse

Wherepossible,connectindividualitemsofequipment toindividualcircuitbreakers.Wherethisisnotpossible, useindividualin-linefusestoprovidethenecessary protection.

ConnectingtheFistmic–Ray60/Ray70

TheFistmiccanbeconnecteddirectlytotheconnector onthefrontoftheunit.

1.EnsuretheFistmiccableconnectoriscorrectly orientated.

2.Fullyinserttheconnectorintotheconnectoronthe frontoftheunit.

3.Rotatethelockingcollarclockwiseuntilitclicks.

SeaTalk

ng®

connection

TheproductcaninterfacewithRaymarine

GPS

orGNSSreceiversandRaymarine

multifunction

displaysusingtheSeaTalk

ng®

connection.

ARaymarine

SeaTalk

ng®

GPSorGNSSreceiver

cannotbeconnecteddirectlytotheproduct,asGPS andGNSSreceiversarepoweredviatheSeaT alk

ng®

backbone.

ConnectingSeaTalk

ng®

BeforeconnectingtoSeaTalk

ng®

,refertothe

SeaTalk

ng®

ReferenceManual,toensurethatthe

maximumpermittedLoadEquivalenceNumber(LEN), fortheSeaT alk

ng®

backboneisnotexceededoncethis

productisconnected.

1.RotatetheSeaTalk

ng®

connector’slockingcollar

anticlockwise,totheunlockedposition.

2.Ensurethespurcableconnectoriscorrectly orientated.

Ray50/Ray60/Ray70

Page 15

3.Fullyinsertthespurcableconnectorintothe

SeaTalk

ng®

connectorontheunit.

4.Rotatethelockingcollarclockwise2clicks,tothe lockedposition.

NMEA0183connection

TheNMEA0183wirescanbeusedtoconnectthe unittoa3rdpartyGPS/GNSSreceiverormultifunction display.

Dxxxxx-1

1.Yellow–Receivepositive(+)wire.

2.Green–Receivenegative(-)wire.

3.White–Transmitpositive(+)wire.

4.Brown–Transmitnegative(-)wire.

TheNMEAwiresshouldbeconnectedtoacompatible NMEA0183deviceasshowninthetablebelow:

NMEA0183wiresNMEA0183device

Yellow–Receivepositive (+)

Transmitpositive(+)

Green–Receivenegative (-)

Transmitnegative(-)

White–Transmitpositive (+)

Receivepositive(+)

Brown–Transmitnegative (-)

Receivenegative(-)

Controlsandinterface

Thecontrolsandinterfaceavailableareasfollows:

Basestation

Dxxxxx-1

5 6 7 8

1.Built-inspeaker

2.Rotaryknob/OKpushbutton—Pressknobin

toaccessmenu/DSCfunctionsandtoconrm selections.Turnrotaryclockwiseoranti-clockwise tomoveupanddownthroughmenuitemsorto changechannelfromtheHomescreen.

3.LCD

4.VOL/SQ—Turnknobtoadjustvolumeorsquelch

upanddown.Presscenterbuttontoswitch betweenvolumeandsquelchcontrol.

5.DISTRESS—Pushupthespringloadedcoverand

pressthisbuttontomakeaDSCdistresscall.

6.16/PLUS—Whenpoweredonpresstoswitch

betweenprioritychannels.

7.Power—Presstopowertheuniton.Pressand

holdfor3secondstopowertheunitoff.Momentary presstoaccesstheshortcutlist.

8.Back—Movebackthroughmenuoptions.

Fistmic

Dxxxxx-1

1.PTT(PushtoTalk)—Pressandholdtosenda

voicemessage.Releasetoreturntoreceivemode.

Note:Themaximumtransmittimeislimited to5minutestopreventun-intentional transmissionsfromoccupyingtheVHF channel.

2.Speaker

3.Microphonelocation

4.ChannelUpandDown—Changesthechannel

upordown.

5.HI/LO—PresstoswitchbetweenHigh(25W)and

low(1W)transmitpower.

6.16/PLUS—Whenpoweredonpresstoswitch

betweenprioritychannels.

Poweringtheuniton

Withtheradioconnectedtoapowersupplythepower buttonisusedtoswitchtheradioonandoff.

1.PressthePowerbuttontopower-uptheradio.

Thestartupisdisplayed.

Ray60

Software V1.00

MMSI: 123456789

Thestartupscreenwillautomaticallytime-outafter 5seconds.

2.PresstheOKbutton,orwaitforthestartupscreen

totime-out.

Page 16

TheHomescreenisdisplayed.

Poweringtheunitoff

Withtheunitpoweredon:

1.PressandholdthePowerbuttonforapproximately

3secondstopowertheunitoff.

Homescreenoverview

Theinformationbelowdescribestheon-screen charactersandsymbolswhichtheradiodisplaysonthe mainscreenandwhattheymean.

INT

SHIP-SHIP

50º 2901202N

001º 101322E

09:48 UTC

Dxxxxx-1

1 2

1.Statusbar—Thestatusbardisplayssymbols

whichindicatethecurrentstatusoftheunit.See

Statusbarsymbolsfordetails.

2.Frequencyband—Indicateswhichchannel

frequencybandisinuse:

•USA—UnitedStatesofAmerica

•INT—International

•CAN—Canada

•WX—Weather

Note:Speciallicensingisrequiredtoreceive USAandCanadianchannelsets.

3.Channelsufx

•a—IndicatesthatthecurrentUSorCanadian

channelissimplex.Thischannelusesthe transmitfrequencyoftheInternationalchannel fortransmittingandreceiving.Ifachannelis simplexinall3frequencybands(e.g.channel 06,thechanneldoesnotrequiretheasufx.

•b—Indicatesthatthechannelisareceiveonly

channel.UsedforCanadianchannelsonly.

Note:Y oucannottransmitonareceiveonly channel.

4.Channel—Indicatesthecurrentchannelnumber

5.Location/TimeorLocation/COG/SOG

—DependingonselectiondisplaysLocation coordinatesandcurrenttimeorLocation coordinatesandcurrentCOGandSOG.

6.ChannelName—Indicatesthenameofthe

currentchannel.

7.Channeltype—Indicatesthetypeofchannel:

•s=Simplex—Simplexchannelstransmitand

receiveonthesamefrequency.

•d=Duplex—Duplexchannelsuseseparate

frequenciestotransmitandreceive.

Statusbarsymbols

Iconsaredisplayedinthestatusbartoindicatethe statusoftheradio.

SymbolNameDescription

ReceptionsignalIndicatestherelative

strengthoftheradio signalbeingreceived. Displaysbetween0 bars(nosignal)and 4bars(strongest signal).

TransmitIndicatestheradiois

currentlytransmitting (e.g.thePTTbutton isbeingpressed.)

ReceiveIndicatestheradiois

currentlyreceivinga transmission

Lowpower

Highpower

Indicatestheradio transmittersisinlow power(1watt)orhigh power(25watt)mode

LocalIndicatesthe

radioisinlocal receptionmode, whichdecreases receiversensitivityin hightrafcareasto decreaseunwanted reception

Ray50/Ray60/Ray70

Page 17

SymbolNameDescription

DSCIndicatesthataDSC

callhasbeenreceived

Powersupply voltagetoolow

Indicatesthepower supplytotheradiois belowthespecied operatingvoltage

Powersupply voltagetoohigh

Indicatesthepower supplytotheradiois abovethespecied operatingvoltage

WeatherIndicatesthatthe

weatheralertsmode isactivated.

GPSFixIndicatesiftheradio

hasaGPS/GNSSx.

Mainmenuoverview

ThemainmenuisaccessedbyPressingtheOKbutton fromtheHomescreen.

SC Calls

Watch Mode

Weather Mode

Dxxxxx-1

1.Currentlyselectedmenuitem

2.Scrollbar

3.Menuitems

Themainmenuincludesthefollowingitems:

SymbolNameSub-options

*DSCCalls

•Individualcall

•Distresscall

•Positionrequest

•Groupcall

•Allshipscall

•Phonebook

•Calllogs

•Testcall

•DSCset-up

*WatchMode

•Dualwatch

•Triplewatch

•2ndpriority channel

*WeatherMode

•Weather Homescreen

*ScanMode

•Allchannels

•Allchannels+16

•Savedchannels

•Savedchannels+ 16

•Editsaved channels

SymbolNameSub-options

Hail/Fog/Intercom

•Hailer

•Foghorn

•Intercom

**Hailer/Foghorn

•Hailer

•Foghorn

**Intercom

•Intercom

Set-up

•Displayset-up

•Language

•Units

•Poweroutput

•Sensitivity

•Keybeep

•Channelset-up

•Weatheralerts

•GPSset-up

•DSCset-up

•AIS

•Networkoutput

•ATISset-up

•Maintenance

Page 18

Note:

*MenuitemsnotavailablewhenradiohasA TIS enabledoriftheradiohasbeenpre-programedin MARCOM-Cmode.

**Themenunameandsub-optionsdependonthe peripheraldevicesconnectedtotheradio.

Shortcutlist

PressingthePowerbuttononcewhiletheradiois switchedonwillopentheShortcutslist.TheShortcuts listcanbeusedtoadjustthebrightness,contrastand accessfrequentlyusedfunctions.

Shortcuts

Contrast Channel 06 Add/edit shortcuts

Backlight

Frequentlyusedfunctionscanbeaddedbyselecting

Add/editshortcuts.

AdjustingBrightnessandContrast

TheLCDBrightnessandContrastcanbeadjusted usingtheShortcutslist.

Fromanyscreen:

1.PressthePowerbutton.

2.SelectBrightnessorContrast.

3.UsetheRotaryknobtoadjusttheBrightnessor

Contrasttothedesiredlevel.

4.PressthePowerbuttonagaintoreturntothe

previousscreen.

Initialstartup

Unlessyourradiohasbeenpre-programmed;therst timeyoupower-upyourradioyouwillberequestedto selectcertainoptions.WiththeexceptionofyourMMSI andATISID,youwillalsoberequestedtoenterthese optionsafterafactoryreset.

Afteracknowledgingthestartupscreen,unless previouslysetyouwillbepromptedtomakethe followingselections:

1.Languageselection

SeeSelectingalanguageforavailablelanguages.

2.TurnonAISreception—Ray70only)

Enablesthebuilt-inAISreceiver.Thisstepisonly applicabletoradioswithabuilt-inAISreceiver.See

SwitchingontheAISreceiverformoreinformation.

3.Selectnetworktype

SelectswhichconnectiontotransmitAISandDSC informationtoconnectedequipmenton.Thisstep isonlyapplicableiftheAISreceiverwasturnedon inthepreviousstep.SeeSelectinganetworktype foravailableoptions.

4.EnterMMSInumber

RequiredtoenableDSCfunctions.Thisoptionis notrequiredafterafactoryreset,oriftheradiohas beenpre-programedinMARCOM-Cmode,orhas ATISenabled.SeeEnteringanMMSInumberfor moreinformation.Ifnotalreadyselectedyouwill alsobepromptedtoselectyournetworktype.

5.EnterATISID

Requiredwhentheradiowillbeusedinthe inlandwaterwaysofEurope.Thisstepisonly applicableiftheradiohasbeenpre-programedin MARCOM-Cmode.SeeEnteringanA TISIDfor moreinformation.

6.Frequencybandselection

Setstherelevantchannelsforyourregion.This stepisnotapplicableiftheradiohasbeen pre-programedinMARCOM-Cmode.See

Changingtheradioregionformoreinformation.

Accessingthemenu

Theradio’svariousoptionsandsettingsarecontained withinthemenu.

FromtheHomescreen.

1.PresstheOKbutton.

Selectingalanguage

Thelanguagetheradiousescanbechanged.

FromtheMainmenu:

1.SelectSet-up.

2.SelectLanguage.

Thelanguagesavailableare:

•English(default)—English

•Español—Spanish

•Français—French

•Deutsch—German

•Italiano—Italian

3.Selectthelanguagethatyouwanttheradiotobe setto.

TheUserinterfacelanguageischangedtotheselected language.

SwitchingontheAISreceiver

Ifyourradiohasabuilt-inAISreceiveritcanbe switchedonoroff.

FromtheMainmenu:

1.SelectSet-up.

2.SelectAIS.

3.SelectOn.

Ray50/Ray60/Ray70

Page 19

Selectinganetworktype

Whenconnectingyourradiotootherdevicesitis importanttoensureyouselectthenetworkconnection andtypethatyouwantdatatobetransmittedover.

FromtheMainmenu:

1.SelectSet-up.

2.SelectNetworktype.

Thefollowingnetworktypesareavailable:

•NMEA2000(default)—usestheSeaT alk

ng®

connectiontotransmitdatatootherdevices.

•0183Highspeed—usestheNMEA0183

connectionwith38400baudrate

•0183Stdspeed—usestheNMEA0183

connectionwith4800baudrate.

3.Selectthenetworktyperelevanttothedevices connectedtoyourradio.Ifyourradioisnot connectedtoanyotherdevicesanyoptioncanbe selected.

Selecting0183Stdspeedwilldisabletheinternal AISreceiveronaRay70.

EnteringyourMMSInumber

ToprogramyourradiowithyourMMSInumberfollow thestepsbelow.

Dxxxxx-1

FromtheMainmenu:

1.SelectSet-up.

2.SelectDSCset-up.

3.SelectMMSI.

(Notset)willbedisplayedifnoMMSInumberhas beenset.

4.UsetheRotaryknobtocyclethroughtheavailable numbersandpressOKtoconrmeachnumberand movetothenextdigit.

Youshouldonlyentertheunique9digitMMSI numberprovidedbyyourlicensingauthority.

MMSInumbersstartingwitha‘0’areonlyusedfor groupsandcoaststations.Ifyouentera‘0’asthe rstdigittheradiowillassumeyouareenteringa coaststationMMSIandautomaticallyassigna‘0’as theseconddigit;thisistoensureagroupMMSIis notenteredastheradio’suniqueMMSI.

5.PresstheBackbuttonatanytimetoeditdigitsyou havealreadyentered.

6.PressandholdtheOKbuttontodisplayoptionsto Movecursorbackandforwardthroughthedigits.

7.WhenthenaldigitisconrmedselectDONE.

Enter MMSI number

987654321

Done

8.TheMMSIisdisplayedonscreen,checkthatitis correct,then:

i.SelectY es–Save,or ii.ifthenumberenteredisnotcorrectselectNo

–Retry.

Caution:MMSIandA TISID entry

YoucanonlyentertheMMSInumberand ATISIDonce!

IfyoustoreanincorrectMMSInumberor ATISIDinyourproduct,itwillhavetobe resetbyanauthorizedRaymarine

dealer.

EnablinganddisablingATIS mode

ATISisaEuropeansystemusedonsomeinland waterways.ATISmustbeenabledandauniqueATIS IDenteredinordertouseA TISmode.

FromtheMainmenu.

1.SelectSet-up.

2.SelectATISset-up.

3.SelectATIS.

4.SelectOntoenableA TISmodeorOfftodisable

ATISmode.

WithATISmodeenabledtheradio’sregionwillbe xedtotheINT(international)frequencybandand thefollowingfunctionsaredisabled:

•DSCfunctions

•WatchMode

•ScanMode

•High/lowpowerisrestrictedoncertainchannels

OnceATIShasbeenenabledanA TISIDmustbe entered.

Page 20

EnteringyourA TISID

WhenATISmodeisenabledauniqueA TISIDmust beentered.

Dxxxxx-1

FromtheMainmenu.

1.SelectSet-up.

2.SelectATISset-up.

3.SelectATISID.

(Notset)willbedisplayedifnoA TISIDhasbeen set.

Therstdigitissettoa‘9’andcannotbechanged, thisisbecauseallATISIDsstartwitha‘9’.

AsmostA TISIDsconsistofa‘9’followedbyyour 9digitMMSInumber;ifyourradioalreadyhasan MMSInumbertheA TISIDwillbepre-lledinthis format.

4.IftheA TISIDhasbeenpre-lled,checkitcarefully againstyourissuedA TISID.

5.ToenteryourA TISIDmanually,usetheRotary knobtocyclethroughtheavailablenumbersand pressOKtoconrmeachnumberandmovetothe nextdigit.

Youshouldonlyentertheunique10digitATIS IDprovidedbyyourlicensingauthority .

6.PresstheBackbuttonatanytimetoeditdigitsyou havealreadyentered.

7.PressandholdtheOKbuttontodisplayoptionsto Movecursorbackandforwardthroughthedigits.

8.WhenthenaldigitisconrmedselectDONE.

Enter

ATIS ID

Done

9 1

2 3 4 5 6 7 8 9

9.TheATISIDisdisplayedonscreen,checkthatitis correct,then:

i.SelectY es–Save,or ii.ifthenumberenteredisnotcorrectselectNo

–Retry.

Caution:MMSIandA TISID entry

YoucanonlyentertheMMSInumberand ATISIDonce!

IfyoustoreanincorrectMMSInumberor ATISIDinyourproduct,itwillhavetobe resetbyanauthorizedRaymarine

dealer.

Changingtheradioregion

PriortousingtheradioyoumustsettheFrequency bandtotheregionyourradiowillbeusedin.

FromtheMainmenu:

Dxxxxx-1

1.SelectSet-up.

2.SelectChannelset-up.

3.SelectFrequencyband.

4.Selecttherelevantregionfromthelist.

Theavailableoptionsare:

•USA

•INT=International

•CAN=Canada

Dxxxxx-1

Makingadistresscall

Inanemergencyyoucanuseyourunittomakean automaticDSCdistresscall.

Withthespringloadedcoveropen:

Ray50/Ray60/Ray70

Page 21

Dxxxxx-1

1.PressandholdtheDISTRESSbuttonfor3seconds.

OncetheDISTRESSbuttonispresseda3second countdownwillbegin,whenthecountdownreaches zerotheDSCdistresscallistransmitted.

Thedistresscallisrepeatedautomaticallyuntilitis acknowledged.

2.Onceanacknowledgementisreceived,orifno acknowledgementisreceivedfor15seconds;press andholdthePTTbutton.

3.Slowlyandclearlyspeakthedetailsofthedistress inthefollowingformat:

MAYDA Y,MAYDA Y,MAYDA Y

Thisis<statenameofvessel3times>

MAYDA Y<statenameofvessel1time>

Mypositionis<statelatitudeandlongitude,ortrue

bearinganddistancefromaknownpoint.>

Iam<statenatureofdistresse.g.sinking,onre etc.>

Ihave<statenumberofpersonsonboardandany otherinformation—drifting,aresredetc.>

IREQUIREIMMEDIA TEASSISTANCE

OVER

4.ReleasethePTTbutton.

MakingaMaydaycall

Inanemergencyyoucanuseyourunittomakea Maydaycall.

1.Pressthe16PLUSbutton.

2.PressandholdthePTTbutton.

3.Slowlyandclearlyspeakthedetailsofthedistress:

MAYDA Y,MAYDA Y,MAYDA Y

Thisis<statenameofvessel3times>

MAYDA Y<statenameofvessel1time>

Mypositionis<statelatitudeandlongitude,ortrue

bearinganddistancefromaknownpoint.>

Iam<statenatureofdistresse.g.sinking,onre etc.>

Ihave<statenumberofpersonsonboardandany otherinformation—drifting,aresredetc.>

IREQUIREIMMEDIA TEASSISTANCE

OVER

4.ReleasethePTTbutton.

5.Ifanacknowledgementisnotreceivedthenrepeat steps2to4above.

Cancellingadistresscallbefore transmission

Tocanceladistresscallbeforeitistransmittedfollow thestepsbelow:

1.ReleasetheDISTRESSbuttonbeforethecount downtimercompletes.

Whenthebuttonisreleasedyouwillbereturned tonormaloperation.

Cancellingadistresscallafter transmission

Adistresscallcanbecancelledafterithasbeen transmitted.

Dxxxxx-1

1.SelectOptions.

2.SelectCanceldistress.

3.SelectYestoconrmcancellation.

4.SelectOK.

5.PressandholdthePTTbuttonandmakea

broadcasttoallstationsgivingyourvessel’sname, callsignandMMSInumberandcancelthefalse distressalert

Example:“All,Stations,AllStations,AllStations. Thisis<NAME>,<CALLSIGN>,<MMSIID>,

Page 22

<POSITION>.Cancelmydistressalertof<DATE>, <TIME>,<NAME>,<CALLSIGN>”

Dxxxxx-1

6.Repeatthebroadcastdescribedinstep5.

Receivingadistresscall

ItisexpectedthatonlyaCoastRadioStation(CRS) willacknowledgeDSCdistresscallsandwillactasthe coordinatorfortherescueoperation.

Whenadistresscallisreceivedanalarmissoundedat fullvolumeandtheLCDdisplaysinformationrelatingto thedistress.Thisincludes:

•MMSIorNameofvessel(Nameofdistressed vesselisonlydisplayedifitisacontactsavedinthe phonebook).

•Natureofdistress.

•Latitudeandlongitudeofdistressedvessel.

•Timeofdistresscall.

Show info

Sinking

MMSI 123456789

00:04

Accept - Ch16 [10]

IftheAutochannelchangefunctionisenabled;10 secondsafterreceiptofadistresscalltheradiowill automaticallyre-tunetochannel16.Otherwisetheuser ispromptedtochangechannelmanually.

Thedetailsofthedistresscallarerecordedinthe distresslogandtheenvelopeiconwillashon-screen toletyouknowamessagehasbeenreceived.When connectedtoaRaymarine

multifunctiondisplay

(MFD)thepositiondatafromthedistresscallcanalso bedisplayedintheChartapplication.

Whenthereceiveddistresscallisacknowledgedbythe CRSorbyanotherstationtheradiowillresumenormal operation.

Acknowledgingadistresscall

Distresscallsmustonlybeacknowledgedifthecall continueswithoutacknowledgementfromaCRS,you arecloseenoughtothedistressedvesseltobeof assistanceandarepreparedtorelaythedistresstoa CRSbyanymeanspossible.ClassDDSCradiosare forbiddenfromautomaticallyacknowledgingdistress calls.Acknowledgementmustonlybemadebyvoice messageonchannel16.

Afterreceivingadistresscallthathasgoneunanswered:

1.Switchtochannel16tolistenforthedistressvoice message.

2.WaitfortheCRStoacknowledgethecall.

3.Ifthedistresscallisnotacknowledgedbyanother stationthenacknowledgethecallasfollows:

MAYDA Y

(MMSIofthevesselindistress)

Nameofvesselindistress<repeated3times>

Callsignofthevesselindistress

Thisis<MMSIofyourvessel>,<nameofyour

vesselrepeated3times><callsignofyourvessel>

RECEIVEDMAYDAY

4.YouMUSTthennotifytheshoreauthoritiesbyany meanspossibletorelaythedistresscall.

MakingaroutineDSCcall

YoucanuseyourproducttomakearoutineDSCcall tocontactsavedinthephonebook,ortoanyMMSI number.

FromtheMainmenu:

1.SelectDSCCalls.

2.SelectIndividualcall.

3.SelectPhonebooktomakeacalltoacontactsaved inyourPhonebook,or

4.SelectEnterMMSItomanuallyentertheMMSI numberofthestationyouwanttocontact.

5.SelectaPhonebookentryorenteranMMSI manuallyandpresstheOKbutton.

6.SelecttheChannelyouwanttotransmitthecallon.

IftheMMSIisaCSRthentheradiowillautomatically tunetothecorrectChannel.

7.PresstheOKbutton.

Theradionowwaitsforanacknowledgementtobe received.

8.Ifanacknowledgementisreceived,selectOK.

9.PressandholdthePTTbuttonandspeakyour message.

10.ReleasethePTTbuttonwhenyouhavecompleted yourmessage.

Ray50/Ray60/Ray70

Page 23