Raymarine 86124-1, D6396-2 User Manual

To Automatically Steer

to a Fixed Wind Angle

mode

WIND 45S

Autotack

WIND

To Adjust Autopilot

Course-keeping Accuracy

Autopilot response controls course-keeping accuracy.

Higher response settings keep a tighter course but

increase the amount of drive activity and battery use.

Set to a level appropriate for your needs

®

®

SmartPilot

ST7002 Controller

Wind

WIND 30P

WIND 30P

WIND 30P

Wind

Wind

Auto Tack

PORT

Auto Tack

STARBOARD

RESPONSE

Use or to adjust response level.

Press disp to return to previous mode.

To Adjust Lighting Level

1 sec1 sec

LAMP

D6396-2

WIND 30P

N.B. Refer to section 1.5 of the

ST7002 Operating Guide for full details

Use disp to adjust lighting level.

Wait 10 sec to return to previous mode.

Quick Start Guide

86124-1

Display Layout

To change the

To follow a Route

disp

Press to display
data pages

Press for 1 second
for lamp control

Press for 3 seconds
for power off

resp

Press to display
response level

track

When the Autopilot is activated,
press to folow a route from a
connected navigation system.

Press again to accept the
new course

mode

Press to select
Wind Vane mode

mode

res'm

Press to resume
previous course

&

Press to adjust calibration,
response and gain

course change keys

Port 1˚ Starboard 1˚
Port 10˚ Starboard 10˚

auto

Press to activate
the Autopilot

standby + auto

Press for Wind Vane mode

standby

Press for Manual Control

To activate the Autopilot For Manual Control

Autopilot Heading

55˚

85˚

AUTO

set on a Chartplotter

AUTO

STANDBY

AUTO

AUTO

STANDBY

mode

AUTO

x3x3

STARBOARD

NEXT WPT

OK?OK?

TRACK

D6397-2