This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and may cause harmful
interference to radio communications if not installed and used in
accordance with the instructions. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
IC Compliance Statement
This device complies with Part 15 of the FCC Rules and Industry Canada
license-exempt RSS standard(s). Operation is subject to the following
two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
IC Caution
Intentional or unintentional changes or modifications to the equipment
not expressly approved by Rand McNally could void the user’s authority
to operate the equipment.
IC attestation de conformité
Ce dispositif est conforme à la norme FCC Partie 15 et aux norme(s)
RSS permis-exempte(s) d’Industrie Canada. L’opération est soumise
aux deux conditions suivantes:
• Connect the equipment into an outlet that is on a different circuit
from the GPS unit.
• Consult the dealer or an experienced radio/TV technician for help.
3. Ce dispositif ne peut pas provoquer d’interférence nocive et
4. Ce dispositif doit accepter toute interference reçue, y compris
les interférences qui peuvent causer un mauvais fonctionnement
du dispositif.
When using the device, ensure that the antenna of the device is at least
20 cm away from all persons.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
Attention
Les changements ou modifications à l’équipement, que ce soient
intentionnelles ou non, non expressément approuvés par Rand
McNally pourraient annuler l’autorisation de l’utilisateur à utiliser cet
équipement.
IC: 10199A-10011A
TND™ Tablet 85 User Manuali
About GPS
The Global Positioning System (GPS) is a constellation of satellites that
a GPS receiver uses to calculate geographical positions. To determine
a position, data from at least three satellites is required. To determine
elevation, the data from four or more satellites is required. Accuracy of
the positioning varies from 10 feet to several hundred feet, depending
on vehicle placement and the surrounding environment.
Geographical terrain (such as mountains), man-made structures (such as
highway overpasses, bridges, and tall buildings), as well as weather
can interfere with the GPS signal. For best GPS reception, position the
device and mount with a clear line of sight to the sky. Some vehicles
may have a limited view of the sky due to metal sun shields or a
metallized windshield coating.
Map data includes the geographical coordinates for address locations
and points of interest (POIs). With GPS reception, your device calculates
a route to your selected location.
Customer Support
Call toll-free:
800-333-0136
Service hours:
Monday through Friday, 7 a.m. to 6 p.m. CT
(Except official holidays)
E-mail:
TNDSupport@randmcnally.com
TND™ Tablet 85 User Manualii
Table of Contents
Table of Contents
1. Your Device .......................................................................................... 1
What’s Included ................................................................................. 2
Install the Mount ............................................................................... 2
8. More Information .............................................................................. 49
TND™ Tablet 85 User Manualiii
1. Your Device
Caution: Important Safety Information
Navigation
• Use this device at your own risk.
• Use this device only when it is safe to do so.
• Look at the display only when it is safe to do so.
• Traffic regulations always have priority over any instructions
from the navigation system.
• Follow navigation system instructions only when local regulations
and road traffic allow you do so.
• Make sure that the mount is securely mounted and properly
adjusted before each trip.
• Note: If you do not understand the spoken instructions or are
unsure of what to do next, refer to the navigation map on your
navigation device.
Installation
• Make sure that the mount does not impair the driver’s visibility.
Device
• Do not use sharp-edged objects on the device touch screen.
• The device is not waterproof and is not protected against
water damage.
• Protect the device from extreme temperatures. Operating
temperature for the device is between 32 degrees F and
120 degrees F.
• Do not open the navigation device casing.
• Do not attempt to replace the battery. Contact Rand McNally
Customer Support with questions about the battery.
• Always follow local regulations when disposing of this device.
• Note: Make sure that there are no kinks in the cable and that
it will not be damaged by any sharp objects.
• Note: Use only a moist cloth to clean the navigation device.
• Note: Do not pull the cable to unplug the unit.
• Do not attach the mount within the airbag deployment zone.
• When installing the mount, make sure that it does not pose a risk
in the event of an accident.
• Do not run cables directly next to safety-relevant devices and
power supplies.
• After installation, check all safety-relevant equipment.
• Connect the wall charger to a 120V or 240V outlet only.
• Connect the vehicle charger to a 12V outlet only.
TND™ Tablet 85 User Manual1
1. Your Device
What’s Included
Rand McNally TND™ Tablet
• Two-piece mount:
- Magnet
- Bracket with suction cup
• Quick Start Guide
• Anti-glare screen protector
• Vehicle charger
• Wall charger
Bcable
• US
Install the Mount
Note: Follow all local regulations governing the placement of the
mount.
1. Select an area with a line of sight to the sky and GPS satellites.
2. Clean and dry the mounting area.
3. Remove the suction cup protective film.
4. Attach the two pieces of the mount together.
5. Adjust the angle of the mount.
6. Pull the suction cup lever up to release suction.
7. Plug the power cord into the mount and the vehicle’s 12-volt
power source.
8. Place and hold the mount suction cup against the mounting surface.
9. Press the suction cup lever down until it snaps into place.
10. Snap the tablet onto the mount.
11. Adjust the tablet so that it can be easily seen and does not
block the driver’s line of sight.
TND™ Tablet 85 User Manual2
TND™ Tablet 85 Hardware
Dash cam
Power
1. Your Device
Home
Volume
Down Up
Micro USB
(power)
Audio out
Micro SD
card
Main Menu
TND™ Tablet 85 User Manual3
2. Getting Started
Connecting to Wi-Fi
When you first turn on your tablet, you’ll be asked to select a Wi-Fi
network to connect to the Internet. A Wi-Fi connection is required
to browse the web, download apps, and use Internet-enabled features
such as weather and traffic. Choose your wireless access point or
hotspot from the list and type in your password.
Note: If you skip this step, you will not be able to use all the features
of your tablet. The Truck GPS app, however, does not require a
Wi-Fi connection.
Registration
In the next step, you’ll be prompted to register your tablet with
Rand McNally. Your registration ensures that you have access to
the latest information and updates, as well as customer support.
TND™ Tablet 85 User Manual4
2. Getting Started
Navigating Your TND Tablet 85
Swipe down at top to view settings
AB
CDE
Android User Interface
1
Bluetooth®
2
4
31
5
6
7
2
Do not disturb
3
Wi-Fi is on
Indicates remaining battery power
4
Current time
5
6
Settings
7
View installed apps
Back
8
Return to last home screen
9
View open apps
10
Main Menu
A
Rand Navigation 2.0
B
9810
TND™ Tablet 85 User Manual5
DriverConnect
C
Truck Tools
Cameras
D
Gallery
E
2. Getting Started
TND Tablet 85 Quick Settings
• Bluetooth – Pair with another device using Bluetooth.
• Wi-Fi – Connect to a wireless network.
• Connect to Car Stereo – Connect your headphone output to a
vehicle aux input.
• Driving Mode Restrictions – Set restrictions on app usage while
driving.
• Configure Homescreen – Add, delete, or rearrange apps located in
the folders of your T85’s homescreen.
• Android Settings– Opens the Android device settings screen.
• System Updates – Update your T85.
• GPS Repair – Fix missing or out-of-date files for your navigation
system.
• About – View information about your device.
• Registration – Register your device.
TND™ Tablet 85 User Manual6
2. Getting Started
Android Settings
• Do not disturb – Options for disabling notifications and alarms.
• Network & Internet – Options for Wi-Fi, data usage, tethering,
VPN, and Airplane mode.
• Connected devices – Options for Bluetooth, Cast, printing, and
USB.
• Apps & notifications – Options for notifications, app permissions,
default apps, and access.
• Battery – Displays battery life and power options.
• Display – Options for wallpaper, brightness, sleep timers, and screen
responsiveness.
• Sound – Options for media, alarm, and notification volume, and
default sounds.
• Storage – Options for managing storage used by files and apps.
• Security & location – Options for settings screen lock preferences,
location services, and other security settings.
• Users & accounts – Options for adding and managing user accounts
and data synchronization.
• Accessibility – Options for screen readers, font sizes, magnification,
and other ease-of-use settings.
• System – Options for language, time, and gesture settings, system
information, and factory reset.
TND™ Tablet 85 User Manual7
3. Rand Navigation 2.0
67
1
2
1
Single-line Search
Tap to begin tying, and enter a destination, address, or Point of
3
Interest. You can access any destination from the single-line search.
2
Map View Mode
Tap to switch the map view: 3D map, North up, or Heading up.
4
3
Wi-Fi Connected Services
Tap to enable fuel prices, weather and traffic on the map.
4
Zoom
Home Screen
Tap + or - to zoom in or out on the map.
5
Return to current location
Tap to view your current location on the map.
6
Virtual Dashboard
Tap to view a variety of information concerning your current trip.
7
Street/Intersection/Location
Tap to toggle between the current street name, the upcoming
intersection, or your current location.
8
Time/Elevation
Tap to toggle between ETAs, Times, Remaining distance and
Elevation.
89
5
10
9
Settings
Tap to access settings, such as: General, Truck Info, Route, Map, and
Warnings settings.
10
Full Screen
Tap to change the view to full screen.
TND™ Tablet 85 User Manual8
3. Rand Navigation 2.0
1. Tap Up or Downto view options.
2. Tap the option to be set.
3. Enter the new information.
4. Tap Back
Truck Tools Page
Preferences Page
General
Language ................................................10
Yard Time ZoneHawaii-Aleutian TimeAlaska Time
Pacific Time
Arizona
Mountain Time
Central Time
Eastern Time
Indiana (East)
Atlantic (Canada) Time
Newfoundland Time
Vehicle Type Truck
Bus
Car/Light truck
For the screen and spoken instructions.
Note: Some tools and settings may not
Controls how routes are calculated.
General Options
Load Prompt Enabled
Always loaded
Specify whether mileage should be
calculated with the truck empty, always
loaded, or whether to display a prompt
for each route. When set to Enabled,
each time you tap Start a New Route,
a window displays asking if the truck is
loaded or empty.
Mileage LogTruck & busCar only
Truck & Car
Disabled
Custom POIsTap to display the list of custom Points of
Interest
Touch Sound On/Off slider
System Settings Tap to display Android System settings
GPS Repair Tap to update missing, broken, and/or
out-of-date files in the GPS. An internet
connection is required.
Weight (Empty) Click the pencil icon to enter a numeric value.
Weight (Loaded) Click the pencil icon to enter a numeric value.
See Load Prompt in General
preferences.
Height Click the pencil icon, and use the dials to select your vehicle’s height.
Route Options
Traffic On/Off slider (requires Wi-Fi connection)
Recalculation Auto
Manual
Preferred RouteFastest route Shortest route
ETA AdjustmentIncrease ETA moreIncrease ETA some
ETA ok
Decrease ETA some
Decrease ETA more
Set adjustments to your ETA due to
weather or traffic conditions. You can
add (increase) time to make the trip
take longer or subtract (decrease) time
to make the trip take less time.
Turn AnnouncementsSet three distances at which you want to be warned about an upcoming turn.
The first announcement will be the farthest from the turn and the third the
closest to it.
Width Click the pencil icon, and use the dials to select your vehicle’s width.
Trailers Straight 48’
53’
Double
Triple
Number of Axles Use the dial to select the number of axles.
TND™ Tablet 85 User Manual11
Junction ViewsSet the distance before the maneuver at which the highway junction view
screen appears.
Route AvoidsSelect/de-select from the list of options:Tollways, Freeways, Ferries, Tunnels, Small
Roads, U-Turns, Cross-country borders, Dirt
roads
Permanent AvoidsTap to manage your list of areas and roads to permanently avoid.
3. Rand Navigation 2.0
Map OptionsMap Options
Day/Night Mode Automatic
Day
Night
Route Color Tap the color to select.
Map View Mode Heading up
North up
3D view
Map Auto Zoom On/Off
Auto scale
Street scale
City scale
State scale
Set to street/city/state scale to specify the
maximum scale of the zoom.
Lane GuidanceOn/Off slider
When on, the map guides you to the
correct lane in preparation of upcoming
turns.
Truck POI IconsOn/Off slider
Select icons to display on map
Select travel centers, service, weigh stations and truck POIs to display on the
map. Tap any category to fill in the
square and display those icons.
Address Book IconsOn/Off slider
Address book entries appear as pushpin
icons unless they are assigned to a group.
Truck IconUse the arrows to select different icons to display when using the truck setting.
Use the provided colors to select the truck
icon color.
Bus Icon Use the arrows to select different icons to display when using the bus setting. Use the provided colors to select the bus
icon color
POI IconsOn/Off slider
Select icons to display on map
Select restaurants, banks, and other
Car/Light truck IconUse the arrows to select different icons to display when using the car setting.
Use the provided colors to select the car
icon color
consumer POIs to display on the map. Tap
any category to fill in the square and
display those icons.
TND™ Tablet 85 User Manual12
3. Rand Navigation 2.0
Warnings Options
Warning Type None
Audio & Visual
Visual only
Audio only
Auto Dismiss WarningsNeverAfter 2 seconds
After 10 seconds
After 30 seconds
Height and weight violations will not be
auto dismissed.
Curve WarningsOn/Off sliderClick the pencil to manually edit, or use
the slider to set distance.
Hill WarningsOn/Off sliderClick the pencil to manually edit, or use
the slider to set distance.
Engine Brake WarningsOn/Off sliderClick the pencil to manually edit, or use
the slider to set distance.
Narrow Road WarningsOn/Off sliderClick the pencil to manually edit, or use
the slider to set distance.
Warnings Options
Speed limit On/Off slider
Set the amount over the posted limit at
which the warning appears.
Set a user-defined maximum speed to
be warned whenever the truck exceeds
that speed, regardless of posted
speed limits.
Speed Limit ChangeOn/Off sliderClick the pencil to manually edit, or use
the slider to set distance.
Weigh StationOn/Off sliderClick the pencil to manually edit, or use
the slider to set distance.
State/Province BorderOn/Off sliderClick the pencil to manually edit, or use
the slider to set distance.
Timezone Change On/Off slider
Toll Booth Alert On/Off slider
Click the pencil to manually edit, or use
the slider to set distance.
Maintenance On/Off slider
Construction Area On/Off slider
Click the pencil to manually edit, or use
the slider to set distance.
TND™ Tablet 85 User Manual13
Loading...
+ 38 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.