Rand McNally TND 730, TND 530 lm User Manual

TRUCK

GPS

For Sales Information Please Contact

RoadTrucker Inc (www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

TNDTM 730 & 530 LM

FCC Compliance Statement

For Sales Information Please Contact

RoadTrucker Inc (www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and may cause harmful
interference to radio communications if not installed and used in
accordance with the instructions. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the
following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

IC Compliance Statement

This device complies with Part 15 of the FCC Rules and Industry Canada
license-exempt RSS standard(s). Operation is subject to the following
two conditions:

1. This device may not cause interference, and

2. This device must accept any interference, including interference
that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

IC Caution

Intentional or unintentional changes or modifications to the equipment
not expressly approved by Rand McNally could void the user’s authority
to operate the equipment.

IC attestation de conformité

Ce dispositif est conforme à la norme FCC Partie 15 et aux norme(s)
RSS permis-exempte(s) d’Industrie Canada. L’opération est soumise
aux deux conditions suivantes:

• Connect the equipment into an outlet that is on a different circuit
from the GPS unit.

• Consult the dealer or an experienced radio/TV technician for help.

3. Ce dispositif ne peut pas provoquer d’interférence nocive et

4. Ce dispositif doit accepter toute interference reçue, y compris
les interférences qui peuvent causer un mauvais fonctionnement
du dispositif.

When using the device, ensure that the antenna of the device is at least
20 cm away from all persons.

Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.

Attention

Les changements ou modifications à l’équipement, que ce soient
intentionnelles ou non, non expressément approuvés par Rand McNally
pourraient annuler l’autorisation de l’utilisateur à utiliser cet équipement.

IntelliRoute® TND™ 730/ 530 LM User Manual i

IC: 10199A-01001A

About GPS

For Sales Information Please Contact

RoadTrucker Inc (www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

The Global Positioning System (GPS) is a constellation of satellites that
a GPS receiver uses to calculate geographical positions. To determine
a position, data from at least three satellites is required. To determine
elevation, the data from four or more satellites is required. Accuracy of
the positioning varies from 10 feet to several hundred feet, depending
on vehicle placement and the surrounding environment.

Geographical terrain (such as mountains), man-made structures (such as
highway overpasses, bridges, and tall buildings), as well as weather
can interfere with the GPS signal. For best GPS reception, position the
device and mount with a clear line of sight to the sky. Some vehicles
may have a limited view of the sky due to metal sun shields or a
metallized windshield coating.

Map data includes the geographical coordinates for address locations and
points of interest (POIs). With GPS reception, your device calculates a route
to your selected location.

Customer Support

Call toll-free:

800-333-0136

Service hours:

Monday through Friday, 7 a.m. to 6 p.m. CT
(Except official holidays)

E-mail:

IntelliRoute® TND™ 730/ 530 LM User Manual ii

[e-mail]

Table of Contents

For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)

8312 Sidbury Rd.; Wilmington, NC 28411 - [phone] / [phone]

1. Your Device ...............................................................................................1

Safety Information ...................................................................................1

What’s Included .....................................................................................2

Charge the Battery .................................................................................2

Install the Mount ......................................................................................2

Your IntelliRoute® TND

™

.........................................................................3

2. Settings ...................................................................................................4

Main Menu ..............................................................................................4

Guide to Truck Tools and Device Preferences .............................................5

Truck Info ...............................................................................................6

Warnings ...............................................................................................7

General Preferences ............................................................................. 8-9

Route Preferences ..................................................................................10

Map Preferences ....................................................................................11

3. Destinations .............................................................................................12

Tips ......................................................................................................13

New Location .................................................................................. 14-17

Address Book .................................................................................. 18-19

Multi-Stop Trips ............................................................................... 20-22

Tap Map ...............................................................................................23

Avoid List ..............................................................................................24

Points of Interest (POIs) ..................................................................... 25-28

Local Search ...........................................................................................29

Confirmation Windows ..........................................................................30

Toll Costs, Route Compare ......................................................................31

Look for this icon for help tips on many screens.

Note: Some screens may appear different, depending on device model.

4. Maps & Routing .......................................................................................32

Route Map Window ..............................................................................32

Exits Quick View .....................................................................................33

Directions Slide-Out List ........................................................................34

Virtual Dashboard ............................................................................ 35-36

Junction View, Turn View .......................................................................37

Location and Route Options ..................................................................38

5. Tools & Features .......................................................................................39

Wi-Fi ....................................................................................................39

Weather .................................................................................................40

Fuel Prices .............................................................................................41

Truck Tools .............................................................................................42

Timers .................................................................................................43

Mileage ................................................................................................44

Trails .....................................................................................................45

Fuel Logs ................................................................................................46

Quick Planner ......................................................................................47

Road Atlas Information ...........................................................................48

Unit Converter .......................................................................................49

Calculator .............................................................................................49

Calendar .............................................................................................49

Notepad .............................................................................................49

Traffic Everywhere (optional) ............................................................ 50-51

6. Connect With Rand ..................................................................................52

Rand McNally Dock ................................................................................52

TripMaker

®

............................................................................................53

Custom POI Information ................................................................... 54-55

Export Mileage and Fuel Logs .................................................................56

Tell Rand .............................................................................................57

More Information ..................................................................................58

IntelliRoute® TND™ 730/ 530 LM User Manual iii

1. Your Device

For Sales Information Please Contact

RoadTrucker Inc (www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

Caution: Important Safety Information

Navigation

• Use this navigation device at your own risk.

• Use this navigation device only when it is safe to do so.

• Look at the display only when it is safe to do so.

• Traffic regulations always have priority over any instructions from
the navigation system.

• Follow navigation system instructions only when local regulations
and road traffic allow you do so.

• Make sure that the mount is securely mounted and properly
adjusted before each trip.

• Note: If you do not understand the spoken instructions or are
unsure of what to do next, refer to the navigation map on your
navigation device.

Installation

• Make sure that the mount does not impair the driver’s visibility.

Device

• Do not use sharp-edged objects on the device touch screen.

• The device is not waterproof and is not protected against water
damage.

• Protect the device from extreme temperatures. Operating
temperature for the device is between 32 degrees F and
120 degrees F.

• Do not open the navigation device casing.

• Do not attempt to replace the battery. Contact Rand McNally
Customer Support with questions about the battery.

• Always follow local regulations when disposing of this device.

• Note: Make sure that there are no kinks in the cable and that
it will not be damaged by any sharp objects.

• Note: Use only a moist cloth to clean the navigation device.

• Note: Do not pull the cable to unplug the unit.

• Do not attach the mount within the airbag deployment zone.

• When installing the mount, make sure that it does not pose a risk
in the event of an accident.

• Do not run cables directly next to safety-relevant devices and
power supplies.

• After installation, check all safety-relevant equipment.

• Connect the wall charger to a 120V or 240V outlet only.

• Connect the vehicle charger to a 12V outlet only.

IntelliRoute® TND™ 730/ 530 LM User Manual 1

1. Your Device

For Sales Information Please Contact

RoadTrucker Inc (www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

What’s Included

• Rand McNally IntelliRoute® TND™

• Windshield mount with suction cup

• Quick Start Guide

• Vehicle charger

• USB cable

Charge the Battery

It is recommended that the device is always
connected to a power source during use.

Note: The vehicle may need to be on for the device to charge.

Install the Mount

Note: Follow all local regulations governing the placement of the mount.

1. Select an area with a line of sight to the sky and GPS satellites.

2. Clean and dry the mounting area.

3. Remove the suction cup protective film.

4. Adjust the angle of the mount using the thumbscrews.

5. Pull the suction cup lever up to release suction.

6. Plug the power cord into the device and the vehicle’s 12-volt
power source.

7. Slide the device onto the mount.

8. Place and hold the mount suction cup against the
mounting surface.

9. Press the suction cup lever down until it snaps into place.

10. Adjust the device so that it can be easily seen and does not
block the driver’s line of sight.

Thumbscrews

Thumbscrews

Press down

Press down

IntelliRoute® TND™ 730/ 530 LM User Manual 2

IntelliRoute®TND™ 730

Slide up
to mount

to hold

Slide up
to mount

IntelliRoute®TND™ 530

to hold

IntelliRoute®TND™ 530

For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)

8312 Sidbury Rd.; Wilmington, NC 28411 - [phone] / [phone]

3

4

5

6

IntelliRoute®TND™ 730

1. Your Device

1

2

8

7

1

Your IntelliRoute® TND™

1

Battery Power Indicator

A red light indicates the battery is charging and blinks when the
battery is low; a green light indicates the battery is fully charged.

2

Power Button

Press and hold to turn on or off. While the device is running, the
power button can also be used for quick access to certain features
with one quick tap. (See page 9 for Quick Power Press settings.)

3

Audio Output

Connect to optional external speaker.

4

Video Input

Connect to optional back-up or blind spot camera.

Note: When a camera is connected, tap the camera icon in the upper
left corner of the map screen to view. A quick tap on the power button
adjusts the brightness of the camera image.

5

Mini-USB Port

Connect the charger or the USB cord.

6

SD Card Slot

For future use, as needed.

7

Reset Button

Use the reset button on the back of the device to restart. This will
cancel the current route, but preferences, address book, and other
personal data will be saved.

8

Speaker

2

3

4

5

6

7

8

Start Your Device

Each time you turn on your device, the Warning and Legal Consent
window displays.

• To view short tutorial on device use, tap Tutorial.

• Tap Accept, or if you turned the device off while on a route,

tap Accept and Continue Previous Route.

IntelliRoute® TND™ 730/ 530 LM User Manual 3

2. Settings

For Sales Information Please Contact

RoadTrucker Inc (www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

1 2 3

5 6 7

8

4

Main Menu

1

Driver Info

Switch between two driver profiles, for team driving. Turn team driving
on in Preferences > General. (See page 8.)

2

Load Option*

Specify in Preferences whether the trailer is always loaded or whether
you want to be prompted each time a route is calculated.
(See page 8.) (Does not display if load option is set to Always

Loaded.)

3

Driver Status*

Select driver status.

9

10

Note: Set Driver Status to Automatic to start/stop driving timers when

the vehicle moves/stops. (See page 8). However, when the driver status
is set to Automatic mode, tapping the driver status buttons on the
Main Menu temporarily overrides the automatic setting.

4

Battery Power Indicator

5

Truck Tools

Select to enter truck information, set warnings, and access other tools.
(See page 5.)

6

Go To Map

Tap to view location on the map.

7

Choose Destination

Tap to select an address or point of interest (POI).

8

Preferences

Tap to set device, route, or map options. (See page 5.)

9

Mute/Unmute the Speaker

Tap to mute or unmute spoken instructions.
Note: You can also tap this icon when it appears on the map screen
to mute/unmute.

10

Volume

IntelliRoute® TND™ 730/ 530 LM User Manual 4

Tap to increase or decrease spoken instructions volume.

*Note: Not available in Car Mode.

1. Tap and to view the options.

For Sales Information Please Contact

RoadTrucker Inc (www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

2. Tap the option to be set.

2. Settings

Device Preferences Page Device Preferences Page

3. Enter the new information.

4. Tap Back to save changes.

Truck Tools Page

Truck Info

Hazmat Type ............................................ 6

Height ....................................................6

Number of Axles ......................................6

Trailers ....................................................6

Truck ETA Adjustment ..............................6

Weight (Empty) .......................................6

Weight (Loaded) .....................................6

Width ....................................................6

Warnings

Auto Dismiss Warnings ............................7

Construction Area ...................................7

State or Province Border/

Time Zone Change Warning ............7

Curve Warnings .......................................7

Driving Day ..............................................7

Driving Session .........................................7

Engine Brake Warnings ............................7

Hill Warnings ..........................................7

Narrow Road Warnings ...........................7

On Duty Day ...........................................7

On Duty Week ........................................7

Speed ....................................................7

Speed Limit Display .................................7

State/Province Border Alert .....................7

Toll Booth Alert .......................................7

Warning/Alert Prompts ...........................7

Warning Display Size ...............................7

Weigh Station .........................................7

IntelliRoute® TND™ 730/ 530 LM User Manual 5

General

Align screen ............................................9

Brightness ...............................................8

Clock Setting ..........................................9

Contact & About .....................................9

Day/Night Map Color ..............................8

GPS Status ..............................................9

Keyboard ................................................9

Language ................................................9

Load Option ............................................9

Mileage Log ............................................8

My Custom POIs .....................................8

Quick Power Press ..................................9

Reset Truck Timers ..................................8

Screen Click ............................................9

Screen Snapshot Button .........................9

Shortcut Button ......................................9

Skin Style - Day .......................................8

Skin Style - Night ....................................8

Team Driving ............................................8

Tutorial ...................................................9

Units ....................................................9

Update Driver Status ...............................8

Vehicle Type ............................................8

Voice Name ............................................9

Yard Time Zone .......................................8

Route

Cross-Country Borders ..........................10

Dirt Roads .............................................10

Fast Recalc ............................................10

Ferries ..................................................10

Freeways ...............................................10

Junction View Distance ..........................10

Manage Avoid List ................................10

Recalculation ........................................10

Route ..................................................10

Tollways ................................................10

Truck ETA Adjustment ........................... 10

Tunnels .................................................10

Turn Announcements ............................10

Turn View Distance ...............................10

U-Turns .................................................10

Map

Address Book Icons ...............................11

Bus Icon .................................................11

Car Icon ................................................11

Map Auto Zoom ...................................11

Map Style ..............................................11

POI Icons ...............................................11

Route Color ..........................................11

Truck Icon .............................................11

Truck POI Icons ......................................11

2. Settings

For Sales Information Please Contact

RoadTrucker Inc (www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

Truck Info Options

Hazmat Type None

Explosives
Gases
Flammable Liquids
Flammable Solids
Oxidizers
Poison
Radioactive
Corrosives
Other
PIH

Weight (Empty) Use the + and - buttons or enter a numeric
value by tapping the calculator.

Weight (Loaded) Use the + and - buttons or enter a numeric
value by tapping the calculator.

See Load Option in

Preferences › General (page 8)
or on the Main Menu (page 4).

Height Use the + and - buttons or enter a numeric
value by tapping the calculator.

Truck Info Options

Width Use the + and - buttons or enter a numeric

value by tapping the calculator.

Trailers Straight
48’
53’
Double
Triple

ETA Adjustment Increase ETA more
Increase ETA some
ETA ok
Decrease ETA some
Decrease ETA more

Set adjustments to your ETA due to weather

or traffic conditions. You can add (increase)
time to make the trip take longer or
subtract (decrease) time to make the trip
take less time.

Number of Axles Use the + and - buttons.

IntelliRoute® TND™ 730/ 530 LM User Manual 6

2. Settings

For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)

8312 Sidbury Rd.; Wilmington, NC 28411 - [phone] / [phone]

Warnings Options

Warning/Alert Prompts None

Audio & Visual
Visual
Audio

Auto Dismiss Warnings Never
After 10 seconds
After 30 seconds
Height and weight violations will not be

auto dismissed.

Warning Display Size Full screen
Small bar
Height and weight restrictions will always

display in full screen.

Curve Warnings Set warning distance to curves by using the
+ and - buttons.

Hill Warnings Set warning distance to hills by using the
+ and - buttons.

Engine Brake Warnings Set warning distance to locations where
engine braking is prohibited by using the +
and - buttons

Narrow Road Warnings Set warning distance to narrow roads by
using the + and - buttons.

Driving Session Set when to be warned before reaching the
driving session limit.

Driving Day Set when to be warned before reaching
the driving hours limit.

On Duty Day Set when to be warned before reaching the
duty hours limit.

On Duty Week Set when to be warned before reaching the
duty week limit.

Speed Limit Display None
Truck only (limited)
Show car (if no truck limit is available)

Warnings Options

State/Province
Border Alert Set warning distance to state/province

borders by using the + and - buttons.

State or Province Border/
Timezone Change Off

On

Toll Booth Alert Set warning distance to toll booths
by using the + and - buttons.

Weigh Station Set warning distance to weigh stations
by using the + and - buttons.

Construction Area Set warning distance to construction
areas by using the + and - buttons.

Construction information is based on

RoadWork™ data distributed through the
Rand McNally Dock. (See page 52.)

Speed Set warning distance to speed limit
changes by using the + and - buttons.

Set the amount over the posted limit at
which the warning appears.

Set a user-defined maximum speed to
be warned whenever the truck exceeds
that speed, regardless of posted
speed limits.

Note: To turn warnings off completely, tap the - button
until “off” displays.

IntelliRoute® TND™ 730/ 530 LM User Manual 7

2. Settings

For Sales Information Please Contact

RoadTrucker Inc (www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

General Preferences Options

Skin Style - Day Ice

Carbon
Classic

Skin Style - Night Ice
Carbon
Classic

Vehicle Type Truck
Car
Bus

Controls how routes are calculated.

Note: Some tools and settings may not
be available in car mode.

Yard Time Zone Hawaii
Alaska
Pacific Time
Arizona
Mountain Time
Central Time
Eastern Time
Indiana (East)
Atlantic (Canada)
Newfoundland

Team Driving Turn team driving on and set profiles
to keep separate driving timers for
two team members.

General Preferences Options

Brightness Set separately for day and night modes.

My Custom POIs Tap Manage Custom POIs to specify how

custom POIs are displayed on the map: set
image, warning distance, warning type, and
street/city/state level map display. Tap the “x”
to delete any set of POIs.
(See page 54 for Custom POIs.)

Update Driver Status Automatic
Main Menu buttons
Timers Inactive

Specify how driver status is changed.

Note: When in Automatic mode,
tapping the driver status buttons on the
Main Menu will temporarily override
the automatic setting.

Reset Truck Timers Automatic
Manual

Mileage Log Truck only
Car only
Truck & Car
Don’t log mileage

(See page 44 for mileage.)

Day/Night Mode Always day
Always night
Automatic

IntelliRoute® TND™ 730/ 530 LM User Manual 8

2. Settings

For Sales Information Please Contact

RoadTrucker Inc (www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

General Preferences Options

Load Option Prompt

Always loaded

Specify whether mileage should be

calculated with the truck empty, always
loaded, or whether to display a prompt
for each route. When set to Prompt, each
time you tap Begin New Route, a window
displays asking if the truck is loaded or
empty.

Screen Click Click off
Click on

Tutorial View on-device tutorial

Keyboard ABC

Computer (QWERTY)

Voice Name Samantha
Tom (English only)
Claudia (No street names)

Language English
Español
Français

For the screen and spoken instructions.

General Preferences Options

Screen Snapshot Button Off

On

Shortcut Button Main Menu
Go to Map

The shortcut button appears in the bottom

right corner of the screen.

Quick Power Press POI along route
Screen snapshot
Main Menu
Show map
Mute on/off
Save current location
Tell Rand

Press the power button for 1 second to

access these screens at any time.

Align screen Calibrate the touch screen.

Note: Select this option if your device

seems to have buttons that are hard
to tap.

GPS Status Tap to show details about your location.

Units U.S. Standard

Metric

Contact & About Tap to show version information
and copyrights.

Auto Select

Clock Setting 12-hour clock
24-hour clock

IntelliRoute® TND™ 730/ 530 LM User Manual 9

Route Preferences Options Route Preferences Options

For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)

8312 Sidbury Rd.; Wilmington, NC 28411 - [phone] / [phone]

2. Settings

Note: The default settings for your device are already optimized for

truck routing. Use the options below to fine-tune these settings.
A route may still include a roadway or maneuver set to Avoid if the
only legal route found contains these types of roads or the route is
over several hundred miles.

Truck ETA Adjustment Increase ETA more (by 15%)
Increase ETA some (by 5%)
ETA ok
Decrease ETA some (by 5%)
Decrease ETA more (by 10%)

Set adjustments to your ETA due to

weather or traffic conditions. You can
add (increase) time to make the trip
take longer or subtract (decrease) time
to make the trip take less time.

Recalculation Manual recalculate
Auto recalculate

Route Fastest route
Shortest route

Freeways Allow all (default)
Avoid freeways
Prefer freeways
Avoid small roads

Tollways Allow tollways
Avoid tollways

U-Turns Allow u-turns
Avoid u-turns

Ferries Allow ferries
Avoid ferries

Tunnels Allow tunnels
Avoid tunnels

Manage Avoid List Roads
States/Provinces
Areas
Routes

To avoid a state or province select it from
this list. Tap on the map and select a road,
area, or route to add it to the Avoid List. Tap
the x to remove. (See page 24.)

Fast Recalc Off
On
Fast recalc calculates a route to a midpoint

between your location and the destination,
rather than recalculating the entire route
from scratch. Best used on a long route
that has short distances between
intersections.

Turn Announcements Set three distances at which you want
to be warned about an upcoming turn.
The first announcement will be the farthest
from the turn and the third the closest to
it.

Turn View Distance Set the distance before the maneuver at
which the local street turn view screen
appears. (Note: In 3D map view, this
warning is not needed and will be
turned off.)

Cross-Country Borders Allow cross borders
Avoid cross borders

Junction View Distance Set the distance before the maneuver
at which the highway junction view
screen appears.

Dirt Roads Allow dirt roads
Avoid dirt roads

IntelliRoute® TND™ 730/ 530 LM User Manual 10

2. Settings

For Sales Information Please Contact

RoadTrucker Inc (www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

Map Preferences OptionsMap Preferences Options

Map Style Light

Dark

Map Auto Zoom Off
On, auto scale
On, street scale
On, city scale
On, state scale

Set to auto scale to keep the current

vehicle position and the next turn
in the map view at all times. Set to
street/city/state scale to specify the
maximum scale of the zoom.

Note: Map redraw speed is impacted
by autozoom choice, especially when
combined with 3D map display option.
Turn it off for quicker display.

POI Icons Off
On

Select icons to display on map

Address Book Icons Off
On

Address book entries appear as pushpin

icons unless they are assigned to a group.
Grouped entries appear as folders.
(See page 19.)

Truck Icon Use the arrows to select different icons to
display when using the truck setting.
Use the slider to change the color.

Car Icon Use the arrows to select different icons to
display when using the car setting.
Use the slider to change the color.

Bus Icon Use the arrows to select different icons to
display when using the bus setting.
Use the slider to change the color.

Route Color Use the slider to select.

Select restaurants, banks, and consumer

POIs (“Other” category) to display on
the map. Tap any category to fill in the
square and display those icons.

Truck POI Icons Off
On

Select icons to display on map

Select travel centers, service, weigh stations

and truck POIs to display on the map. Tap
any category to fill in the square and

display those icons.

IntelliRoute® TND™ 730/ 530 LM User Manual 11

3. Destinations

For Sales Information Please Contact

RoadTrucker Inc (www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

2 3 4

5 6

1

Destinations

To access this window from the Main Menu, tap Choose Destination.

1

Back

Tap to return to the Main Menu.

2

New Location

Tap to route to a new location by address, city center, intersection,
or latitude/longitude. (See page 14.)

3

History

7

Tap to route to a recently entered location.

4

Address Book

Tap to view a list of saved locations. (See page 18.)

5

Multi-Stop Trips

Tap to view a list of saved multi-stop trips or to create a new one.
(See page 20.)

6

Points of Interest/POIs

Tap to search for a point of interest (POI) such as a gas station,

restaurant, etc. (See page 25.)

7

Local Search
Tap to search for local businesses, restaurants, and more

by name or keyword. (Note: Wi-Fi connection required.)

(See page 29.)

IntelliRoute® TND™ 730/ 530 LM User Manual 12

Tap to view a longer list of names

For Sales Information Please Contact

RoadTrucker Inc (www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

matching the typed characters.

Tap to view a list of previously

selected locations.

Add a space.

3. Destinations

Helpful Tips on Entering Addresses

Auto-Complete Feature:

Enter the first few characters in a name and a short list displays
a couple of names that start with the typed characters.

On the keyboard, the only keys available are for the next valid
characters in a search name.

Continue entering characters until the searched-for name displays
in the list. Tap on the name to select it.

Cities:

Some cities with common names such as “Athens” have several types
of names associated with a city.

If a name does not display, continue typing characters until the name
you are looking for displays in the list.

back one space.

Type an apostrophe, hyphen,

or other symbol.

Delete last character and move

Streets:

If the next letter in the street name can not be selected on the keyboard,
tap Expand Search to search a greater area.

The Expand Search button can also help locate addresses that may actually
be in a different town, spelled slightly differently, or in a neighboring town.

Note: If you’re entering a State or County Route, it’s typically best to first
either enter the State or County initials (for example, State Road 535 would
be entered as “SR”) but you may also need to try other options, such as
“State Road” or “CA” for California, for example.

IntelliRoute® TND™ 730/ 530 LM User Manual 13

3. Destinations

For Sales Information Please Contact

RoadTrucker Inc (www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

1 2 3

5 6

4

New Location

1

Address
Tap to route to an address by entering the city, street, and number,
or by entering the zip code and street. (See page 15.)

2

City Center
Tap to route to a city center. (See page 16.)

3

Intersection

Tap to route to two intersecting roads in a city. (See page 16.)

4

Back
Tap to return to the previous window.

5

Enter Lat/Long

Tap to route to a location by latitude and longitude. (See page 17.)

6

Menu

Tap to return to the Main Menu.

IntelliRoute® TND™ 730/ 530 LM User Manual 14

3. Destinations > Addresses

For Sales Information Please Contact

RoadTrucker Inc (www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

Search for an Address

1. Tap Choose Destination > New Location > Address.

2. Type the first few characters in the city name. As you type,
a short list of matching city names displays.

3. Tap on a city to select it.

• If the city is not displayed on the short name list, continue typing

characters in the city name or tap List to display a long list of city
names. Use the up and down arrows to view all cities/states.
Tap on a city to select it.

Note: If a city name appears twice within a state, you may need to check
both for your specific address.

4. Or tap Enter Zip Code. Type the zip code.

5. Type the first few characters in the street name, or if the next
characters of the street name cannot be selected on the keyboard,
tap Expand Search and search a wider area.

6. Tap on the street name from the displayed list.

7. Tap the house number or tap List to show a list of address ranges
and select a range.

Note: To enter the House Number before the street, tap this button in
step 5. This preference will be saved for subsequent address entry.

8. Tap on the street number range from the list.
The Confirmation Window displays. (See page 30.)

9. Tap Begin New Route to navigate to the location.

IntelliRoute® TND™ 730/ 530 LM User Manual 15