RANDELL FX1-4N1AM User Manual

FX Series Refrigerated Drawer model Remote FX1-4N1 Modified

THE MOST REVOLUTIONARY, ENERGY-EFFICIENT, FLEXIBLE, FOOD-SAFE REFRIGERATION SYSTEM

FX1-4N1M FX1-4N1AM

Description:

• Flexible Refrigeration

• Energy Efficiency

• Food Safety

Single refrigerated Insert with unnished top. Whether operating
as a refrigerator, freezer, rapid chiller or safety thaw, the FX Series
revolutionizes point of use refrigeration by allowing the operator
to adjust the temperatures from -5°F (freezer) operation up to
40°F (refrigerator) or any setting in between utilizing its unique
convertible refrigeration system. Using a patented technology that
provides 100% in-drawer cooling, this ultra-efcient self-contained
system operates as refrigerator, freezer, rapid chiller and safety
thaw, providing precise temperature control without compromising
operator exibility.

Specifications:

REFRIGERATION SYSTEM: The FX Series uses a patented in­drawer cooling system that directs 100% of the cooling inside
the insulated and removable drawer Insert (see below). The
evaporator coil is mounted horizontally above the drawer Insert
with an integral gasket that seals against the insulated drawer
compartment when closed. The refrigeration system operates
only when the drawer is closed, efciently managing the air­ow while reducing energy and humidity build-up. Press-t
removable gasket with magnet-to-magnet seal is standard.

DRAWER SYSTEM: The FX Series drawer system is the only full­extension, full product view, drawer system that has the drawer
tracks outside the cooled compartment offering a more reliable,
durable system not prone to the cold or debris environment
common in traditional drawer systems. The full-extension tracks
are constructed of 12 gauge stainless steel with a fully integrated
Insert support system. The drawers slide on self-lubricating Delrin
material requiring no lubricating maintenance by the operator. The
drawer box and intermediate tracks are removable without tools
and can only be reinstalled one-direction for proper t. The drawer
system has been tested with over 300,000 cycles without failure
(90 pound test load).

model FX1-4N1, shown with optional recessed handle

CABINET BASE/INTERIOR: The cabinet interior is high grade stainless steel
to allow long use and beauty while providing easy to maintain and clean
surfaces.

ELECTRICAL: Standard 115 volt with NEMA 5-15 cord and plug; In multi­stack applications, a jumper cable is available to allow up to three units on
one wall circuit (three units total).

Standard Features:

• Convertible Refrigeration System (Refrigerator, Freezer, Rapid Chill
and Safety Thaw)

• Rapid Chills 20 lbs. of Product Stored in (2) 12x20x2” Pans in 4 Hours

• Safety Thaws 20 lbs. of Product Stored in (2) 12x20x2” Pans in
6-8 Hours

• Point-of-use Size and Design

• Precise Temperature Control

• Patented In-drawer Cooling System

• Removable Insulated Drawer Compartment

• Ambient Drawer Track System

• Full-Extension Drawer System

• 100% Front Breathing

• Horizontal Gasket is Out of Harms Way

REMOVABLE INSULATED INSERT: This exclusive design allows
full removal of the refrigerated compartment for cleaning or
pre-loading. Made of high impact ABS plastic with high density
polyurethane insulation. Provides unparalleled insulation value
with no air gaps.

TEMPERATURE STATEMENT: The unit is provided with a electronic
temperature controller that can be easily adjusted by the operator
to any temperature setting between -5°F (freezer) operation up to
40°F (refrigerator).

CABINET EXTERIOR: The cabinet exterior is high grade stainless
steel to allow long use and beauty while providing easy to maintain
and clean surfaces. Optional Stainless steel tops offer the ability to
use the FX Series as a work-top unit or cooking equipment stand.

1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net

Please reference our website for the most
updated product information and specifications.

Options & Accessories:

Flange Kit for FX-1 (for installation in equipment or units by others)
Top Kit (46” x 29.5”, 1” thick) for Work Top Application
Top Kit (48” x 33”, 2” thick) for Cooking Equipment Application
Caster Kit (3.5”)
Leg Kit (6”)
Stacking Collar Kit (for 2-3 high)
Additional Insulated Inserts: Qty. _____

Thaw Racks
Pan Racks

Recessed Handle(s)

Contact factory for other remote options.

Randell FX Series, Page 19

PP SPEC0164 Rev. B

Revised 01/10

TOP VIEW

Model Remote FX1-4N1 Modified

PP DWG0006 Rev. A

FRONT VIEW

SIDE VIEWS

MODEL REMOTE FX1-4N1 MODIFIED: SINGLE DRAWER WITH UNFINISHED TOP

Storage

L D H

46” 29.1” 16.4” 1 3.0 1018 4 1.53kw 2.73kw 1.89kw 1.25kw 115 5-15p 225

* Evaporator temperature range (+30 to -10ºF) refrigerator/freezer application.
Exhaust fan in housing to remain for condensate evaporation. No drain required.

No. of
Drws.

(cubic

feet)

BTU*

Req.

(actual)

Amp

Draw

Refrig.
Power
Usage

(per day)

Freezer

Power
Usage

(per day)

Blast Chiller

Power Usage

4 Hours

(per unit)

Safety Thaw

Power Usage

6 Hours

(per unit)

Volt NEMA

Weight

Ship

(lbs)

Incorporating

Adande

Technology

®

1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net

© 2009 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of
Dover Corporation.