32SA POP-UP
GEAR DRIVEN ROTOR
“SA” for Simple Adjust 
Replaces competive product such as Orbit© Saturn III™
SPRAYS 19 TO 32 FEET
ADJUST FROM 40-360º
READY FOR INSTALLATION
1/2” INLET
Simple to use:
Find your fixed LEFT edge.
Using the palm of your hand, turn the center cap to the right until it stops. Then turn it to the left until it stops. This is your fixed left edge. Arc is preset to rotate 180º.
Adjusting the Pattern.
Using a screwdriver, adjust the arc dial clockwise (+) to increase the arc or counterclockwise (-) to decrease the arc. Pattern is adjustable from 40º to 360º.
Do not turn past right or left stop. Adjust wet or dry.
Adjusting the Radius.
Using a screwdriver, turn radiusreduction screw to reduce radius up to 35%. Adjust wet or dry.
3.0 Pre-Installed Nozzle* Performance Chart
Pressure PSI |
25 |
35 |
45 |
55 |
Radius ft. |
29 |
31 |
31 |
32 |
Flow GPM |
2.17 |
2.60 |
3.00 |
3.25 |
|
|
|
|
|
*Rain Curtain™ Nozzle Technology
for even water distribution
Questions? Please call 1-800-Rain Bird or visit us at www.rainbird.com
© 2002 Rain Bird Corporation
Loading...