Radio Shack 2101860 Manual

0 (0)

OWNER’S MANUAL

FRS RADIO 21-1860

INTRODUCTION

Your RadioShack FRS radio is a portable, easy-to-use, two-way radio that you can carry almost anywhere. Use it at shopping malls, amusement parks, sports events, or at the beach to contact family and friends, or for vital communications in a neighborhood watch.

Your radio has 14 channels and 38 different quiet codes. If someone else is using the channel you selected and you do not want to hear that person, select another channel or use the quiet feature. You can talk with a person who has a FRS radio if both radios are tuned to the same channel and quiet code.

Your radio also has one touch access key for 3 pre-programmed or user preferable FRS channel. The radio can auto dual watch between the operation channel and user preset channel.

Your radio has auto-squelch, which means you will not hear anything on a channel unless someone is transmitting nearby on the same channel. You can turn off auto-squelch to hear weaker, distant transmissions.

Also, if the radio is idle for 2 hours, it automatically shuts off. It turns on again when you press any key.

You can connect an optional speaker/microphone and earphone, charger (not supplied) to the radio. And, the belt clip lets you take your radio almost anywhere.

USING THE RADIO

A. DISPLAY

Your radio comes with a multifunction backlighted display. By pressing any button except the CALL and PTT, the backlight will illuminate for 7 seconds.

1. Shows the selected channel number.

TEKCOM Industries Limited

Page 1 of 6

Radio Shack 2101860 Manual

2.Shows the selected privacy code number.

3.Shows the selected memory channel number.

4.QUIET”: Displays when the QUIET mode is enabled.

5.“BUSY” : Displays when a call is being received.

6.: Displays when your radio is transmitting or the CALL button is pressed.

7.“FUNC” : Displays when the secondary function is enabled.

8.“SCAN” : Displays when the scan mode is activated.

9.“DUAL” : Displays when the dual-watch function is activated.

10.”: Displays when the working channel is set to be skipped.

11. ”: Indicates the batteries are low. Replace the batteries when it appears. 12. : Displays when the key tone function is activated.

13.: Displays when the keypad lock is activated. 14.“C-TONE”: Display when the over-tone function is activated.

B. FUNCTION AND LOCATION OF THE CONTROLS

1. “ON/OFF” Volume Control.

TEKCOM Industries Limited

Page 2 of 6

Loading...
+ 4 hidden pages