Rademacher 35000864 User guide
EN Operating instructions
DuoFern Connect actuator .............................25
Item no. 3500 08 64
VBD 586-1 (05.13)
Dear Customers...
i
...with your purchase of this DuoFern Connect actuator, you have de-
cided for a quality product manufactured by RADEMACHER. We would
like to thank you for your condence.
This product has been designed in an eort to the greatest possible
ease of operation. With uncompromising quality requirements, after
extensive test series, we are proud to present this innovative product
to you.
All of our highly qualied sta at
RADEMACHER stand behind this
product.
These instructions...
i
…describe how to install, connect and operate the DuoFern Connect
actuator.
Before you begin work, please read these instructions all the way
through and follow all of the safety instructions. Please save these
instructions and give them to any future owners.
For damage resulting from noncompliance with these instructions
and safety instructions, the guarantee is void. We assume no liability
for any consequent damage.
EN
26
Contents
i
i Dear Customers... ................................................................................26
i These instructions... ............................................................................ 26
1. Key to Symbols .....................................................................................28
2. General safety instructions .............................................................. 29
3. Correct usage ........................................................................................30
4. Incorrect use ......................................................................................... 30
5. General view .........................................................................................31
6. Brief description................................................................................... 32
7. Functional characteristics ................................................................33
8. Description of the congurable parameters ............................. 35
9. Installation / Dismantling ................................................................. 38
9.1 Installation ................................................................................. 38
9.2 Dismantling ............................................................................... 38
10. Electrical connection - Safety instructions ................................. 39
10.1 Electrical connection ............................................................. 40
10.2 Wiring diagram ........................................................................41
11. Logging DuoFern transmitters on/o ......................................... 42
12. Logging on and o per radio code ...............................................43
13. Erase data (reset) ................................................................................. 44
14. Technical data ....................................................................................... 45
15. CE mark and EC conformity ............................................................. 45
16. Accessories ............................................................................................46
17. Warranty conditions ........................................................................... 47
18. SET Magnet ............................................................................................ 47
EN
27
1. Key to Symbols
i
Danger of fatal electric shock.
This sign warns of danger when working on electrical connections,
components etc. It requires that safety precautions be taken to protect
the health and life of the person concerned.
This concerns your safety.
Please pay particular attention to and carefully follow all instructions
with this symbol.
NOTE/I MPORTA NT/ATT ENTION
This is to draw your attention to information which works is important
to ensure trouble-free operation.
Please read the operating instructions for an external device described at this point, (e. g. a tubular motor).
EN
28
2. General safety instructions
i
All work performed on electrical equipment is associated with
a risk of electric shock and electrocution.
◆ The electrical connection and all work on electrical systems must
only be carried out by a qualied electrician (see chapter 10. - 10.2).
◆ Carry out all installation and connection work only in an isolated,
deenergised state.
The use of defective equipment can lead to personal injury
and damage to proper ty (electric shocks, short circuiting).
◆ Never use defective or damaged equipment.
◆ Check that the DuoFern Connect actuator is intact.
◆ Please contact our Customer Service department (see page 48) in
the event of faults or damage to the actuator.
EN
29
3. Correct usage
i
Only use the DuoFern Connect actuator for the control of:
◆ Roller shutters and Sun shading systems
◆ Blinds and external Venetian blinds
Operating conditions
◆ The installation and operation of the DuoFern radio system and
its components is only permitted for those systems and devices
where a malfunction in the transmitter or receiver would not
cause a danger to persons or property or where this risk is already
covered by other safety equipment.
◆ For the electrical connection a 230 V / 50 Hz power supply, to-
gether with a site-provided isolating device (fuse), must be available at the installation site.
IM PORTAN T
Radio systems which transmit on the same frequency can cause
interference.
4. Incorrect use
i
Never use the DuoFern radio system and its components (e. g.
DuoFern Connect actuator) for remote control of devices and systems
with heightened safety-relevant requirements or a heightened risk
of accident. Such use would require additional safety equipment.
Observe the respective statutory regulations for the installation of
such systems.
EN
30
5. General view
i
Fastening
EN
Drive
Status LED
Type plate
Safety
clip
lug
Mains
(230 V / 50 Hz)
SET Magnet
Connect surface / Disconnect surface /
NOTE
Log on/o to/from DuoFern transmitters, s. page 42.
31
6. Brief description
i
The DuoFern Connect actuator can be used to equip drives for
blinds, external Venetian blinds and roller shutters with DuoFern
radio technology.
As soon as you integrate your DuoFern Connect actuator into a
DuoFern radio network, you can make use of many functions oered
by the corresponding DuoFern controllers in combination with the
connected drive.
The DuoFern actuators and transmitters must be connected
to the DuoFern network.
In order to make use of the corresponding controllers (e.g. DuoFern
manual transmitter Standard), you must rst connect the DuoFern
Connect actuator with the DuoFern network. Use the enclosed SET
magnet to switch the actuator to connect and disconnect mode
(see page 42).
NOTE
A detailed description of the various functions, settings and possible combinations for DuoFern systems can be obtained under:
http://www.rademacher.de/duofern.
EN
32
Loading...