Quantum Scalar i3 data sheet

Scalar i3

> DATASHEET

The Easy, Efficient, and Scalable Tape Library

Tape remains a popular storage
choice for data backup and DR, long­term data retention, and unstructured
data archives. Tape’s cost benefit,
durability, portability, and off-line
protection from ransomware are
among the reasons for its sustained
popularity. As IT organizations
wrestle with rapid unstructured
data growth and the increased risk
of ransomware attacks, along with
the business realities of resource
constraints, it’s critical for IT
solutions to maximize efficiencies
beyond just acquisition costs.

EASE OF USE

The Scalar® i3 tape library is designed
for ease of use from initial setup to
ongoing management. The Scalar
iLayer™ management software, proven
to reduce management time and
improve system uptime, has been fully
refreshed for even greater efficiencies
and a modern, intuitive user experience.
Its mobile-first user interface design
allows library management from
anywhere with a network connection on
virtually any device.

HIGH EFFICIENCY

With features like best-in-class
storage density, providing up to 0.75PB
in just 3U and up to 3PB in 12U,
along with 80 PLUS®-certified power
supplies, Scalar i3 enables users
to reduce their tape footprint and
lower their power and cooling costs,
ensuring savings on more than just
the initial purchase.

SCALABILITY

Scalar i3 simplifies growth
management with a modular design
and Capacity-on-Demand (CoD)
scalability. It can scale cartridge slots
from 25 slots up to 200—instantly—
with CoD software licensing, providing
compressed capacities from 375TB
up to 3PB. And users can add read/
write performance as needed, with
support for up to 12 tape drives. With
the partitioning feature, Scalar i3 can
provide data protection and archiving
in a single library as a valuable tool to
address today’s IT challenges.

FEATURES & BENEFITS

iLayer Intelligent Software

Brings system setup and management
to a whole new level of ease, saving
valuable time.

Capacity-on-Demand Growth

Simplifies storage provisioning by
scaling capacity quickly and easily,
without disruption.

Best-in-Class Storage Density

Saves valuable data center footprint with
the highest tape storage per rack U.

80 PLUS-Certified Power Supplies

High efficiency, green power supplies
minimize power and cooling costs.

Advanced Reporting

Media, drive, and media security reports
help balance system resources, improve
security, and improve budget and planning.
Automated report scheduling and
distribution save time.

High Availability Features

Redundant power supplies and control
path failover reduce downtime in the event
of failure.

Proactive Monitoring and Diagnostics

Resolves issues before impacting
operations, to maximize system uptime
and minimize operational expenses.

Encryption Key Management

FIPS-validated solution with KMIP support
makes it easy to manage keys, mitigating
risk of lost data. AES 256-bit encryption
standard for highest levels of security.

LEARN MORE:

>

www.quantum.com/scalar

TECHNICAL SPECIFICATIONS

CAPACITY CONFIGURATIONS

SYSTEM CAPACITY

Max Capacity TB (PB)*

LTO-6 LTO-7

No. of Modules Form Factor Max Slots Max Drives TB PB

1 (1CM) 3U 50 3 312.5 0.3 750 0.75
2 (1CM, 1EM) 6U 100 6 625 0.6 1,500 1.5
3 (1CM, 2EM) 9U 150 9 937.5 0.9 2,250 2.25
4 (1CM, 3EM) 12U 200 12 1,250 1.25 3000 3.0

Minimum capacity is 25 slots; additional slots can be activated with a Capacity-on-Demand (CoD) license.
*Assumes 2.5:1 compression

TB PB

OPERATION

Interface Options: 8Gb fibre channel and 6Gb SAS
Inventory Speeds: Approximately 1 minute for typical configurations
Firmware Updates: Customers can choose to have automatic checks for firmware

Configuration: Auto-discovery and auto-calibration for installed/added components

Library Partitioning: Supports up to 12 partitions
Import/Export: Configurable, 0-25 in 5-slot increments for every module

updates, to ensure use of the latest library and drive code levels.

(modules, tapes, drives, magazines, etc.)

RELIABILITY

Library MSBF: Greater than 2,000,000
Library MTTR: 30 minutes
Power: Optional 2N power
Diagnostics: Proactive diagnostics embedded within the library monitor major

Module Upgrade: Any module may be added in less than 30 minutes; all components

subsystems, runs self-diagnostic procedures, and policy-based
communications to system administrators

are customer-installable.

PHYSICAL

Module HxWxD

Control Module 5.2” x 17.4” x 36.4” (13.3cm x 44.1cm x 92.45cm)

Expansion Module 5.2” x 17.4” x 36.4” (13.1cm x 44.1cm x 92.45cm)

RACK INSTALLATION REQUIREMENTS

• Library must be installed in a standard 19-inch four-post rack enclosure

• Minimum rack depth is 42.13 inches (1070 mm)

SOFTWARE COMPATIBILITY

Consult the most recent Quantum Software Compatibility Guide at http://www.quantum.com/
swcompguide.aspx for a complete list of software and platforms compatible with Scalar i3.

COMPLIANCE AND CERTIFICATION

Safety Standards: IEC60950 with worldwide country deviations
Emissions Standards: CNS13438 Class A, EN55022:2010 Class A,

Immunity Standards: EN55024, KN 35
International Certifications: CE (Europe), VCCI (Japan) TUV/GS (Germany),

FCC Part 15 Class A, KN 32, VCCI

FCC (USA), ICES (Canada), cTUVus (USA & Canada),
EAC (EuroAsian Conformity Mark), KCC (Korea), BSMI (Taiwan)

ENVIRONMENTAL

Electrical: 100-240 VAC, 50-60Hz
Power: 80 PLUS certified power supplies
Temperature: 16 to 35°C operating
Humidity: 20 to 80% non-condensing operating

DRIVE CAPACITY AND PERFORMANCE

Drive Type

LTO-7 6.0 / 15.0 300 / 750
LTO-6 2.5 / 6.25 160 / 400

LTO-7 and LTO-6 tape drives support encryption and LTFS.
*Assumes 2.5:1 compression

Cartridge Capacity

Native/Compressed* (TB)

Drive Throughput

Native/Compressed* (MB/sec)

ADVANCED FEATURES

Advanced Reporting: Media Integrity Analysis report, Media Usage report,

Control Path Failover: Provides redundant connectivity for robotics control

Drive Utilization report, Media Security report and media
removal notifications, Report scheduling with automated report
creation and delivery to distribution lists

ABOUT QUANTUM

Quantum is a leading expert in scale-out storage, archive, and data protection, providing solutions for capturing, sharing,
and preserving digital assets over the entire data lifecycle. From small businesses to major enterprises, more than 100,000
customers have trusted Quantum to address their most demanding data workflow challenges. Quantum's end-to-end, tiered
storage foundation enables customers to maximize the value of their data by making it accessible whenever and wherever
needed, retaining it indefinitely and reducing total cost and complexity. See how at www.quantum.com/customerstories.

©2016 Quantum Corporation. All rights reserved.

www.quantum.com

800-677-6268

DS00509A-v02 Oct 2016