Q-See QSSO2612, QSSO2310, QSSI2612, QSHO3512, QSHI3512 Technical Manual

High Speed Dome User’s Manual

Table of contents

1 FEATURES AND FUNCTIONS ....................................................................................8

1.1 Features ...............................................................................................................................................................8

1.2 Function................................................................................................................................................................8

1.2.1 On-Screen Menu............................................................................................................................................8

1.2.2 Support multiple protocols function .............................................................................................................8

1.2.3 Proportional Pan and Tilt...............................................................................................................................8

1.2.4 On-screen Tips ...............................................................................................................................................8

1.2.5 Preset Setup and Recall ...............................................................................................................................8

1.2.6 Auto Scan........................................................................................................................................................8

1.2.7 Auto Touring ...................................................................................................................................................8

1.2.8 Auto Pattern ....................................................................................................................................................9

1.2.9 Window Blanking............................................................................................................................................9

1.2.10 Action on Alarm .........................................................................................................................................9

1.2.11 Auto Flip and IS (Camera support needed)...........................................................................................9

1.2.12 Self-diagnosis ............................................................................................................................................9

1.2.13 Day/Night Mode.........................................................................................................................................9

1.2.14 Auto Focus .................................................................................................................................................9

1.2.15 Backlight Compensation...........................................................................................................................9

1.2.16 Pan Tilt and Zoom.....................................................................................................................................9

1.2.17 3D Location ................................................................................................................................................9

1.2.18 Idle Status...................................................................................................................................................9

1.3 Specification ......................................................................................................................................................10

2 DOME FUNCTION SETUP ........................................................................................11

2.1 Dome Address...................................................................................................................................................11

2.2 PTZ Control........................................................................................................................................................11

2.2.1 Pan and Tilt Movement ...............................................................................................................................11

2.2.2 Proportional Pan and Tilt.............................................................................................................................11

2.2.3 Auto Flip.........................................................................................................................................................11

2.2.4 3D Location...................................................................................................................................................11

2.3 Lens Control ......................................................................................................................................................11

2.3.1 Lens Control..................................................................................................................................................11

2.3.2 Focus Control ...............................................................................................................................................11

2.3.3 Aperture Control ...........................................................................................................................................11

2.3.4 Auto Backlight Compensation ....................................................................................................................12

2.3.5 Auto White Balance .....................................................................................................................................12

2.3.6 Day/Night Switch..........................................................................................................................................12

2.4 Preset and Recall..............................................................................................................................................12

2.5 Auto Touring ......................................................................................................................................................12

2.6 Auto Scan...........................................................................................................................................................12

2.7 Auto Pattern.......................................................................................................................................................12

2.8 Window Blanking (Privacy Mask) ...................................................................................................................12

2.9 Alarm Input and Output....................................................................................................................................12

3 PROTOCOL、BAUD RATE、ADDRESS SETUP...................................................... 13

3.1 Protocol and Baud Rate Setup .......................................................................................................................13

3.2 Address Setup...................................................................................................................................................14

4 CABLE CONNECTION............................................................................................... 16

4.1 RS485 and Power Cable Connection............................................................................................................16

4.2 Alarm Cable Connection...............................................................................................................................16

4.2.1 System Layout..............................................................................................................................................17

4.2.2 Alarm Connection.........................................................................................................................................18

4.2.3 Keyboard Connection..................................................................................................................................19

5 INSTALLATION ..........................................................................................................21

5.1 Surface Dome Installation............................................................................................................................21

5.2 In-ceiling Dome Installation .........................................................................................................................24

5.3 Pendant Dome Installation...........................................................................................................................25

6 MENU......................................................................................................................... 30

6.1 Screen Menu Index.........................................................................................................................................30

6.2 System Information........................................................................................................................................32

6.3 Main Menu ........................................................................................................................................................32

6.3.1 For DH-SD.....................................................................................................................................................32

6.3.2 For PELCO-P/D............................................................................................................................................33

6.4 Menu Operation...............................................................................................................................................33

6.4.1 Dome Information Setup .............................................................................................................................33

6.4.2 Camera Setup...............................................................................................................................................35

6.4.3 Dome Function Setup..................................................................................................................................35

6.4.4 Alarm Setup ..................................................................................................................................................41

6.4.5 Device Control ..............................................................................................................................................41

6.5 Dome abnormal Phenomenon Operation.................................................................................................42

6.5.1 Restore to Factory Default Setup ..............................................................................................................42

6.5.2 PTZ Movement is not so Smoothly............................................................................................................42

6.5.3 Focus is Blur .................................................................................................................................................42

7 DVR CONNECTION AND SETUP ............................................................................. 43

7.1 Cable Connection...........................................................................................................................................43

7.2 PTZ Setup.........................................................................................................................................................43

7.2.1 3D intelligent positioning Key .....................................................................................................................45

7.3 Preset/ Patrol/Pattern/Scan Function........................................................................................................45

7.3.1 Preset Setup .................................................................................................................................................46

7.3.2 Activate Preset .............................................................................................................................................46

7.3.3 Patrol Setup (Tour setup)............................................................................................................................47

7.3.4 Activate Patrol (tour) ....................................................................................................................................47

7.3.5 Pattern Setup................................................................................................................................................47

7.3.6 Activate Pattern Function............................................................................................................................47

7.3.7 Auto Scan Setup ..........................................................................................................................................47

7.3.8 Activate Auto Scan.......................................................................................................................................48

7.4 Dome Menu Control.......................................................................................................................................48

8 NETWORK KEYBOARD OPERATION (BASED ON DH-SD) .................................... 49

8.1 Dome and Network Keyboard Connection...............................................................................................49

8.2 Network Keyboard Setup before Operation.............................................................................................49

8.3 Menu and Key Introduction..........................................................................................................................49

8.4 Network Keyboard Operation......................................................................................................................51

8.4.1 Direction Setup.............................................................................................................................................51

8.4.2 Preset.............................................................................................................................................................51

8.4.3 Scan ..............................................................................................................................................................51

8.4.4 Tour ................................................................................................................................................................52

8.4.5 PATTERN......................................................................................................................................................53

8.4.6 Pan Rotation .................................................................................................................................................53

9 FOR PELCO-P/D/P1/D1 PROTOCOL........................................................................ 54

9.1 DVR Menu Setup.............................................................................................................................................54

9.1.1 PTZ Control...................................................................................................................................................54

9.1.2 3D Intelligent Positioning key .....................................................................................................................55

9.1.3 Preset Setup and Operation.......................................................................................................................56

9.2 From DVR Menu to Dome Menu..................................................................................................................57

9.3 Network Keyboard Operation for PELCO-P/D/P1/D1.............................................................................57

9.3.1 Keyboard Setup............................................................................................................................................57

9.3.2 Menu Operation............................................................................................................................................58

9.4 Scan/Tour/Pattern for PELCO-P/D/P1/D1..................................................................................................59

9.4.1 Via Preset......................................................................................................................................................59

9.4.2 Via Dome Menu............................................................................................................................................60

10 FAQ ............................................................................................................................63

10.1 Daily Maintenance..........................................................................................................................................63

10.2 Problems and Solutions................................................................................................................................63

Welcome

Thank you for purchasing our integrated speed dome system! This operating manual is designed to be a reference tool for the installation and operation of your system. Here you can find information about this speed dome features and functions, as well as a detailed menu tree.

Before installation and operation please read the following safeguards and warnings carefully!

Important Safeguards and Warnings

1．Electrical Safety

All installation and operation should conform to local electrical safety codes. We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation

2．Transportation Security

No heavy stress, violent vibration or water splash are allowed during transportation, storage and installation. The camera could be damaged by improper handling.

3．Installation

Keep upwards. Handle with care. Do not apply power to the dome before completing installation.

4．Qualified Engineers Needed

All installation here should be done by the qualified engineers. All the examination and repair should be done by the qualified service engineers. We are not liable for any problems caused by unauthorized modifications or attempted repair.

6．Environment

This product has been tested and found to comply with the IP67 standard of Degrees of protection provided by enclosure (IP Code). The dome should be installed in a cool, dry place away from direct sunlight, inflammable, explosive substances and etc.

7．About Camera

Camera should be installed away from direct sunlight or other strong artificial lights to avoid blooming and smear. Only use mild detergent or dry cloth to clean the camera.

8. About Accessories

Be sure to use all the accessories recommended by manufacturer. Before installation, please open the package and check that all the components listed below are included in the package:

z Dome z Power adapter z Bracket anchor z Camera holder z A pair of white gloves z CD for user’s manual

Contact you local retailer ASAP if something is missing in your package.

1 Features and Functions

1.1 Features

Integrated dome system has the following features:

z High resolution integrated digital processing camera. z Build in PTZ and digital decode card. z RJ485 data port for software update. z Digital control and programmable z Simple and effective transmission system z Locate, trace and scan object easily. z Support DH-SD and Pelco-P and Pelco-D protocol z Simple and user-defined interface. z On-screen display menu for setup of programmable functions. z Working with DVR to realize auto touring and auto pattern.

1.2 Function

Integrated dome system has the following functions:

1.2.1 On-Screen Menu

It is easy for you to view dome information and configure dome, camera parameters.

1.2.2 Support multiple protocols function

This series speed dome support Chinese national industrial standard and universally used protocols PELCO-P and PELCO-D. You can use various devices and protocols to operate speed dome.

1.2.3 Proportional Pan and Tilt

This function keeps the image from moving too fast when there is a large amount of zoom. Dome continually decrease or increase pan and tilt speeds in proportion to depth of zoom. When zooms speed is increasing, the camera moving speed becomes slow. When zooms speed is decreasing, the camera moving speed becomes fast.

1.2.4 On-screen Tips

Here you can view:

z Dome title and system version (Software and hardware) z Dome system temperature z Dome protocol, baud rate, address z Dome pan/tilt coordinate, preset ID

1.2.5 Preset Setup and Recall

Preset function is to save the address information (such as PTZ pan/tilt, focus and etc) to the memory so that you can quickly adjust the dome and PTZ to the correct position. This series speed dome supports 80 presets.

1.2.6 Auto Scan

Camera scans back and forth regularly in a horizontal field. Here you need to set left and right limit and scan speed. You can set 5 scanning paths.

1.2.7 Auto Touring

Add addresses into a routine in a desired order and then set time and stop duration for each address. The dome will begin an auto touring between these addresses. You can set 8 touring paths.

1.2.8 Auto Pattern

Memorize dome operation such as pan, tilt, and zoom to repeat. Focus and iris are in auto mode during auto pattern. For each pattern, the time should be less than 60 seconds. You can set 5 pattern paths.

1.2.9 Window Blanking

Window blanking is a user-defined, four-sided area that can not be viewed by you. The blank area will move with pan and tilt functions and automatically adjust in size as the lens zooms. You can set 8 blanking zones.

1.2.10 Action on Alarm

This series speed dome support three alarm modes. There are 7 alarm inputs and 1 alarm output. Alarms can be individually programmed to initiated pattern, or go to an associated preset, scanning, touring when received. Dome will return to a previously programmed state after alarm acknowledgement or to its previous position before alarm.

1.2.11 Auto Flip and IS (Camera support needed)

As long as you continue to hold the joystick in the down position, the dome rotates 180 degrees and repositions itself for uninterrupted viewing of any subjects that passes directly beneath the dome. IS (Image stabilizer) allows you to get stable video.

1.2.12 Self-diagnosis

There is a self diagnosis procedure when dome boots up.

z Tilt and vertical engine check z Camera diagnostics z Display dome information and diagnosis information

1.2.13 Day/Night Mode

Auto/manual switches in low illumination.

z Auto: camera will automatically adjust CCD light level. z Manual: use menu or function keys to select day/night mode.

1.2.14 Auto Focus

Auto focus allows the lens to remain in focus during zoom-in, zoom-out and motion functions to get vivid image. You can use FAR or NEAR button to adjust focus manually.

1.2.15 Backlight Compensation

Balance the brightest and darkest sections of a scene to produce a more vivid picture.

1.2.16 Pan Tilt and Zoom

Supports zoom in and zoom out during tilt and pan movement. In this period focus and iris are both in auto mode to get vivid image.

1.2.17 3D Location

Working with DVR, just click part of the current scene will be displayed in the central window and automatically zooms. All of these allow you to trace precisely.

1.2.18 Idle Status

When there is no available order, you can use menu to set dome idle status after specified duration. The idle status includes turn to specified preset or go to scan, tour or pattern function.

1.3 Specification

Power

Core Consumption Heater Consumption Decode Card Engine Preset Point Auto Tour Auto Pattern Auto Scan Window Blanking Alarm Input/Output Information

Lens Auto Rotation Auto Pan Manual Pan Motion Speed Preset Maximum Speed Manual Tilt Motion Manual Tilt Scan Section Control Port Baud Rate PTZ Scan Accuracy Signal Format S/N Ratio Effective Pixel Horizontal Resolution Fan and Heater Humidity

Environment

AC 24V/3A（±20%）(Includes temperature control circuit) 11W 30W Build-in stepper motor 80 8 5 5 Maximum 24 zones (according to camera core type ) 7/1 Address, dome title, status, temperature, alarm, fan abnormal alarm Adjust speed in accordance with lens Tilt 90º rotates to pan 180 º 0 º -360º continuously

0.5º—180º/S

300º

0.5º—90º/S

-2º—180º

RS485 1200/2400/4800/9600 (Optional)

0.06 ± 0.015º PAL/NTSC (camera mode) > 50dB 768(H)*494(V) 795(H)*596(V) 480TVL/540TVL Auto/Manual (Auto mode has the priority) ＜90%

-40℃—60℃（outdoor）

2 Dome Function Setup

There are two ways to implement dome setup:

z Keyboard or Matrix z On screen display menu

If you are using keyboards or matrix, please make sure the following items in dome and keyboard (matrix) are the same:

z Address z Baud rate z Parity z Protocol

Please check the connection lines before the setup.

Note: All the instructions here are based on the general keyboard.

2.1 Dome Address

Dome only responds to the order of the same address Hard address: Please refer to 3.2 address setup.

2.2 PTZ Control

2.2.1 Pan and Tilt Movement

Move joystick to control the PTZ movement.

2.2.2 Proportional Pan and Tilt

Continually decrease (or increase) pan and tilt speeds in proportion to depth of zoom.

2.2.3 Auto Flip

Rotates dome 180 degrees at the bottom of tilt travel.

2.2.4 3D Location

Click one point; current video will be displayed in screen centre. Drag current section to zoom in or zoom out. (DVR needed here)

2.3 Lens Control

2.3.1 Lens Control

Use control key (usually are TELE and WIDE) to adjust image focus.

2.3.2 Focus Control

Use Far and Near key to adjust focus. Focus will go back to auto mode after initialized or pan/tilt movement or zoom. Note: auto focus function is off in the following conditions:

z Object is not at the centre z Near and far objects are not clear at the same time z Objects with strong rays (such as neon light or spotlight) z Fast moving object z Large barren section (such as wall) z Object is dark or blur

2.3.3 Aperture Control

Aperture control is to control image light. Click OPEN or CLOSE key to modify.

Aperture will go back to auto mode after initialized or pan/tilt movement or

zoom.

2.3.4 Auto Backlight Compensation

This function allows you to balance brightness and darkness sections of the image to produce a more vivid picture.

2.3.5 Auto White Balance

Automatically change color in accordance with environment light. Here you can also modify manually.

2.3.6 Day/Night Switch

Automatically change camera mode between day/night to get vivid resolution. In daytime camera is in color model and at night camera is in black and white mode.

2.4 Preset and Recall

Preset function is to save the address information (such as PTZ pan/tilt, focus and etc) to the memory so that users can quickly adjust the dome and PTZ to the correct position. Here dome supports 80 presets.

2.5 Auto Touring

Add addresses into a routine in a desired order. Set time and stop duration for each address. The dome will begin an auto touring between these addresses. Here you can input maximum 80 presets in one touring.

2.6 Auto Scan

Auto scan is to scan selected area at the same frequency. Here you needs to set left and right limit and interval. There are maximum five auto scan channels.

2.7 Auto Pattern

Auto pattern is to memorize PTZ movement and camera focus. From the starting point, camera move around from the started point at the same interval.

2.8 Window Blanking (Privacy Mask)

Window blank is to hide some zones for privacy reasons. Please use OSD menu to setup.

2.9 Alarm Input and Output

Here users can set 7 alarm input, alarm time and alarm clearance time.

3 Protocol、Baud Rate、Address setup

3.1 Protocol and Baud Rate Setup

Please configure the following settings before begin controlling dome:

z Protocol z Baud rate z Address

Note: All the setup will only become activated after restart system!

Open the lower dome, the image is shown as below.

Protocol Baud rate Parity 1 2 3 4 5 6 7 8

Figure 1 Protocol baud rate and parity 1-4 is for protocol, 5 -6 for baud rate and 7-8 for parity. Please refer to Figure 2 to Figure 4 for detail information.

OFF

2 3 4 Protocol

OFF

OFF OFF OFF DAHUA

ON OFF OFF PELCO-D

OFF OFF

OFF OFF PELCO-P

DH－SD

X X X X Reserved

Figure 2 protocol sheet

5 6 Baud Rate

OFF OFF 9600bps

OFF

ON ON

7 8 Parity

OFF OFF NONE

OFF ON ODD

ON ON NONE

OFF 4800bps

OFF EVEN

3.2 Address Setup

2400bps

1200bps

Figure 3 Baud Rate sheet

Figure 4 Parity sheet

Address

1 2 3 4 5 6 7 8

Figure 5 Address setup Address coding mode adopts binary system. The address value is between 0~255.

Address 1 2 3 4 5 6 7 8

1 1 ON 2 3 ON ON 4 5 ON 6

OFF OFF OFF OFF OFF OFF OFF OFF

OFF OFF OFF OFF OFF OFF OFF

OFF

OFF OFF

OFF

ON ON

OFF OFF OFF OFF OFF OFF

ON ON

OFF OFF OFF OFF OFF

7 ON ON ON

OFF OFF OFF OFF OFF

…… …………………………………………………………………

254 255 ON ON ON ON ON ON ON ON

OFF OFF OFF

OFF

ON ON ON ON ON ON ON

Figure 6 Address sheet

OFF OFF OFF OFF

4 Cable Connection

4.1 RS485 and Power Cable Connection

There are three cable groups here: power cable, RS 485 and Video cable. Draw

out the cables from the dome to connect with main control devices (such as

monitor, control keyboard, DVR and etc.) and power adapter. Please refer to

Figure 7 Connection sheet.

Power

Red (2-pin) AC 24V(polarity free)

Black GND

RS485

Video

Figure 7 Connection sheet

Yellow 485-A

Green 485-B

Black

Video port

485-GND

Video

4.2 Alarm Cable Connection

Open the dome cover and take PTZ chip core out. Turn the core upside down; you can see the alarm port. See Figure 8.

Figure 8 PTZ chip core

In Figure 8, please note:

• Numeral 1 to 7 is corresponding to alarm input 1 to 7.

• In alarm out: NO/COM/NC is a normal close/ normal open linkage

output(Open/close )；

• GND is grounding cable.

Speed dome alarm signal adopts grounding connection mode. This series speed dome support two alarm input types: normal open/normal

close. You can refer to 5.4.4 for the setup.

Please follow the procedures below. ：

a) Parallel connect the GND with com (please use out sourcing power to

alarm detector.)；

b) parallel connect grounds of alarm detector and speed dome ；

c) connect alarm detector NC port with dome alarm in port

d) In dome alarm setup, if contact type is normal open (NO), low voltage will

activate alarm.

e) In dome alarm setup, if contact type is normal close (NC), high voltage

will activate alarm.

Please refer to Figure 9.

4.2.1 System Layout

4.2.1.1 General connection

Figure 9 alarm connection

4.2.1.2 Star connection

Figure 10 General connection-1

Figure 11 General connection-2

4.2.2 Alarm Connection

Figure 12 Star connection

Figure 13 Alarm connection

4.2.3 Keyboard Connection

You can use a keyboard to control the Dome. The display and control can

work simultaneously. One keyboard can control maximum 255 speed domes.

Figure 14 Keyboard connection-1

Speed dome protocol is open and support multiple system platforms. Please

protocol. The most direct and easy way is to use current system to process video

signal and add some control keyboards to control speed dome.

Figure 15 Keyboard connection-2

+ 44 hidden pages