Page 1
E Series
Passive Loudspeakers
E10
10" Two-Way Passive Loudspeaker
E Series
Passive Loudspeakers
E12
12" Two-Way Passive Loudspeaker
E15
15" Two-Way Passive Loudspeaker
E18SW
18" Passive Subwoofer
Features
• High power handling
E10 – 300 W (continuous)
1200 W (peak)
E12 – 400 W (continuous)
1600 W (peak)
E15 – 500 W (continuous)
2000 W (peak)
E18SW – 800 W (continuous)
3200 W (peak)
• E Series Entertainment System –
advanced digital signal processing
tunings and options using QSC
GXD, PLD amplifiers or TouchMix
digital mixers.
• Rugged tour-grade textured paint
• Foam-lined perforated steel grill
• E10 suitable for main PA and
stage monitor
• Optional accessories include:
Subwoofer caster kit, U-style yoke
and M8 rigging kit for permanent
installation
• Dual angle pole socket
(two-way models)
• Subwoofer includes speaker pole
Entertainment Venues ∙ Rental/Production ∙ HOW ∙ Mobile Performers
The E Series is a range of passive
loudspeakers intended for sound reinforcement applications including live performance,
DJ and dance music, karaoke and rental
production. With continuous power ratings
ranging from 300 to 800 watts, E Series is a
great match for QSC GXD and PLD
amplifiers. While E Series speakers will
perform well with any professional amplifier,
QSC has developed custom DSP tunings
for GXD and PLD amplifiers that will
produce extraordinary results.
E Series consists of four models
constructed of rugged plywood and coated
in black, textured paint. Heavy-duty
lined with foam provide protection for the
woofers and a professional appearance. All
three two-way models are equipped with an
all metal, dual-angle, 35 mm socket that
allows the speaker to be mounted vertically
on a pole or angled down by 10° to improve
audience coverage and reduce rear wall
reflections. Multiple mounting options using
E Series accessories are supported. Input
connections include dual NL4 as well as
screw-down terminals.
E10
The E10 is a compact, two-way
loudspeaker featuring a 10-inch, die cast
frame woofer with a 2.5-inch voice-coil
housed in a multi-purpose enclosure that’s
at home in stage monitor or main PA
deployment. It incorporates QSC DMT
(Directivity Matched Transition) design with a
wide 85° coverage. When used as a stage
monitor, the E10 is angled up at a deliberate
55° angle allowing it to be placed near the
performer when used on a crowded stage.
E12
The E12 is a trapezoidal, two-way
loudspeaker featuring a 12-inch die cast
aluminum woofer with a 3-inch voice-coil.
The 15 mm, 11-ply enclosure provides
enough volume to deliver solid lowfrequency extension down to 50 Hz, making
it an excellent choice for applications in
which space or budget
preclude the use of
grilles
™
a subwoofer. The DMT coverage angle of
85° is ideal for most medium and mediumlong throw applications.
E15
The E15 is a trapezoidal, two-way
loudspeaker featuring a 15-inch, 500 W, die
cast aluminum frame woofer with a 3.5-inch
voice coil. It is intended for use when highpower and powerful low-end are needed
from a full-range loudspeaker. A massive
2.8-inch compression driver attached to the
75° DMT waveguide ensures that even the
furthermost listeners will hear clearly.
E18SW
The E18SW is a high-performance direct
radiating subwoofer with a single, 800 W,
18-inch, aluminum frame woofer. It is
designed to produce crushing low-end for
live performance with kick-drum and bass in
the PA or for high-level, high-energy dance
music. A threaded, M20 pole socket and
speaker pole are provided for sub/satellite
use with any of the E Series two-way
models. For portable applications it includes
attachment points for four optional casters.
The subwoofer’s 4 ohm impedance means
that a single woofer can be optimally
powered by a less expensive amplifier.
PLD, GXD and TouchMix Tunings
E Series loudspeakers will perform very well
with any quality, professional power amplifier.
However, by taking advantage of the
complete QSC entertainment system, more
performance and options become available.
Today’s powered loudspeakers rely on finely
tuned digital signal processing (DSP) to
achieve a higher level of performance. When
used with QSC PLD or GXD amplifiers or
with a QSC TouchMix digital mixer, E Series
loudspeakers can also take advantage of
advanced DSP. QSC has developed
E Series DSP settings for all three platforms.
These settings support a variety of applications including live sound reinforcement (with
and without subw
dance music and karaoke.
oofers), stage monitoring,
Page 2
E Series Details
Deployment:
Specifications:
E10 E12 E15 E18SW
Conguration 1 x 10-inch, 2-way,
non-powered
1 x 12-inch, 2-way,
non-powered
1 x 15-inch, 2-way,
non-powered
1 x 18-inch, subwoofer,
non-powered
Frequency Response (-6 dB) 68 Hz - 20 kHz 64 Hz - 20 kHz 55 Hz - 20 kHz 37 Hz - 230 Hz
Frequency Range (-10 dB) 50 Hz - 20 kHz 46 Hz1 - 20 kHz 43 Hz - 20 kHz 32 Hz - 230 Hz
2
Power Capacity
: Continuous/Peak 300 W / 1200 W 400 W / 1600 W 500 W / 2000 W 800 W / 3200 W
Sensitivity 95 dB, 1 W @ 1 m 96 dB, 1 W @ 1 m 97 dB, 1 W @ 1 m 98 dB, 1 W @ 1 m
Coverage Angle 85° conical DMT 85° conical DMT 75° conical DMT N/A
Output (Peak SPL @ 1M) 126 dB 128 dB 130 dB 133 dB
Drivers
LF
254 mm (10-inch) driver with
64 mm (2.5-inch) voice coil;
305 mm (12-inch) driver with
76 mm (3-inch) voice coil
381 mm (15-inch) driver with
89 mm (3.5-inch) voice coil
457 mm (18-inch) driver with
102 mm (4-inch) voice coil
HF
25 mm (1-inch) exit, 45 mm
(1.75-inch) voice coil,
compression driver
25 mm (1-inch) exit, 45 mm
(1.75-inch) voice coil,
compression driver
mm (1.5-inch) exit, 71 mm
38
(2.8-inch) voice coil,
compression driver
N/A
Nominal Impedance 8 Ω 8 Ω 8 Ω 4 Ω
Cross-over Full-range only, 1.8 kHz Full-range only, 1.8 kHz Full-range only, 1.55 kHz Recommended 80 - 120 Hz LPF
Input Connectors 2 x NL4 1 x barrier strip 2 x NL4 1 x barrier strip 2 x NL4 1 x barrier strip 2 x NL4 1 x barrier strip
Enclosure Multi-angle, plywood, black
texture paint nish. One top
mounted handle.Perforated,
powder-coated steel grille
with foam lining.
Trapezoidal, plywood, black
texture paint nish. Two side
mounted handles. Perforated,
powder-coated steel grille with
foam lining.
Trapezoidal, plywood, black
texture paint nish. Two side
mounted handles. Perforated,
powder-coated steel grille with
foam lining.
Rectangular, plywood, black
texture paint nish. Four side
mounted handles. Rear panel
provision for optional casters.
Perforated, powder-coated steel
grille with foam lining.
Mounting and suspension 6 x M8 suspension points, dual
angle, 35 mm pole-socket
6 x M8 suspension points, dual
angle, 35 mm pole-socket
6 x M8 suspension points, dual
angle, 35 mm pole-socket
M20 threaded pole mount
socket.
24" (610 mm)
pole included.
Net Weight 20 kg / 44 lbs 23 kg / 51 lbs 31 kg / 68 lbs 43 kg / 95 lbs
Shipping Weight 23 kg / 50 lbs 26 kg / 57.5 lbs 34 kg / 75 lbs 48 kg / 106 lbs
1
With QSC Processing.
2
Power that the device can withstand for two hours without permanent change in acoustical, mechanical, or electrical characteristics, greater than 10%, using IEC60268 noise based on nominal
impedance in the cabinet with Xover, full range 30 Hz 12 dB/oct.
Page 3
E Series Details
E10, E12 & E15
Input Plate
Block Diagram
E18SW
Input Plate
NL4
NL4
Barrier
Strip
1+
1 2+
2 -
1+
1 2+
2 -
HPF
LPF
+
-
HF
LF
NL4
NL4
Barrier
Strip
1+
1 2+
2 -
1+
1 2+
2 -
Block Diagram
LF
+
-
Page 4
E Series Dimensions
E10
Front Side
13"
330 mm
330 mm
Top
13"
22"
560 mm
E12
Front Side
14.2"
360 mm
14.6"
371 mm
Top
24.2"
616 mm
E15 E18SW
Front Side
28.2"
716 mm
16.5"
420 mm
Top
17.5"
445 mm
Front Side
23.2"
590 mm
23.8"
605 mm
Top
24.2"
616 mm
1675 MacArthur Boulevard • Costa Mesa, CA 92626 • Ph: 800/854-4079 or 714/957-7100 • Fax: 714/754-6174
© 2016 QSC, LLC all rights reserved. QSC and the QSC logo are registered trademarks of QSC, LLC in the U.S. Patent and Trademark office and other
countries. All other trademarks are the property of their respective owners. Patents may apply or be pending.
E Series Spec Sheet 02/16/2016
please recycle
Loading...