Loading...TS-x53Be
TS-253Be
TS-453Be
User Guide
Document Version: 2 17/04/2018
TS-x53Be User Guide
Contents |
|
1. Preface |
|
About This Guide.......................................................................................................................................... |
3 |
Audience....................................................................................................................................................... |
3 |
Document Conventions................................................................................................................................ |
3 |
2. Product Overview |
|
About the TS-x53Be..................................................................................................................................... |
4 |
Hardware Specifications............................................................................................................................... |
4 |
Package Contents........................................................................................................................................ |
6 |
Components................................................................................................................................................. |
6 |
Front Panel............................................................................................................................................... |
7 |
Rear Panel................................................................................................................................................ |
7 |
Right Panel............................................................................................................................................... |
8 |
Front Drive Numbering............................................................................................................................. |
9 |
Installation Requirements............................................................................................................................. |
9 |
Setting Up the NAS..................................................................................................................................... |
10 |
3. Installation and Configuration |
|
Hardware Installation.................................................................................................................................. |
11 |
Drive Installation..................................................................................................................................... |
11 |
Installing Expansion Cards..................................................................................................................... |
19 |
Replacing Memory Modules................................................................................................................... |
25 |
QTS Installation.......................................................................................................................................... |
30 |
Installing QTS Using Qfinder Pro........................................................................................................... |
31 |
Installing QTS Using the Cloud Key....................................................................................................... |
32 |
Installing QTS Using an HDMI Connection............................................................................................ |
34 |
4. Basic Operations |
|
Power Button.............................................................................................................................................. |
36 |
Reset Button............................................................................................................................................... |
36 |
USB One Touch Copy Button..................................................................................................................... |
36 |
LEDs........................................................................................................................................................... |
37 |
Beep Alarm................................................................................................................................................. |
38 |
5. Troubleshooting |
|
Forcing Qfinder Pro or myQNAPcloud to Locate the NAS......................................................................... |
39 |
Hot-swapping Failed Drives........................................................................................................................ |
39 |
Recovering Unintentionally Removed Healthy Drives................................................................................ |
40 |
Support and Other Resources.................................................................................................................... |
40 |
6. Glossary |
|
CloudKey.................................................................................................................................................... |
41 |
CloudLink.................................................................................................................................................... |
41 |
myQNAPcloud............................................................................................................................................ |
41 |
myQNAPcloud ID........................................................................................................................................ |
41 |
Qfinder Pro................................................................................................................................................. |
41 |
QTS............................................................................................................................................................. |
41 |
7. Notices |
|
Limited Warranty......................................................................................................................................... |
42 |
1
Disclaimer................................................................................................................................................... |
42 |
GNU Public License.................................................................................................................................... |
42 |
FCC Notice................................................................................................................................................. |
50 |
CE Notice.................................................................................................................................................... |
50 |
SJ/T 11364-2006......................................................................................................................................... |
51 |
2
TS-x53Be User Guide
1. Preface
About This Guide
This guide provides information on the QNAP TS-x53Be NAS and step-by-step instructions on installing the hardware. It also provides instructions on basic operations and troubleshooting information.
Audience
This document is intended for consumers and storage administrators. This guide assumes that the user has a basic understanding of storage and backup concepts.
Document Conventions
Symbol |
Description |
|
Notes provide default configuration settings and other supplementary |
|
information. |
|
|
|
Important notes provide information on required configuration settings and other |
|
critical information. |
|
|
|
Tips provide recommendations or alternative methods of performing a task or |
|
configuring settings. |
|
|
|
Warnings provide information, that when ignored, may result to potential loss, |
|
injury, or even death. |
|
|
Preface 3
TS-x53Be User Guide
2. Product Overview
This chapter provides basic information about the QNAP TS-x53Be NAS.
About the TS-x53Be
The TS-x53Be is powered by an Intel® Celeron® J3455 quad-core 1.5 GHz processor with burst frequency up to 2.3 GHz. The TS-x53Be comes with two Gigabit LAN ports and supports 4K (H.264) video playback, and 1080p or 4K real-time transcoding. With an accelerated AES-NI engine, the TS-x53Be also provides AES 256-bit encryption to enhance system performance and security, and to protect sensitive business data.
Hardware Specifications
Important
Modifying the hardware or software of your QNAP product invalidates the warranty. QNAP is not responsible for any damage or data loss caused by unauthorized modifications and installation of unsupported third-party applications.
Component |
|
|
TS-253Be |
TS-453Be |
SKU |
|
|
|
|
|
|
|
|
|
Ordering P/N |
• |
TS-253Be-2G |
• TS-453Be-2G |
|
|
• |
TS-253Be-4G |
• TS-453Be-4G |
|
|
|
|
|
|
Processor |
|
|
|
|
|
|
|||
CPU |
Intel® Celeron® J3455 quad-core 1.5 GHz, burst up to 2.3 GHz |
|||
Architecture |
64-bit |
|
||
|
|
|
||
Graphics |
Intel® HD Graphics 500 |
|
||
Encryption engine |
AES-NI |
|
||
|
|
|
|
|
Memory |
|
|
|
|
|
|
|
|
|
Pre-installed |
• |
2 GB RAM: 2 x 1 GB DDR3L |
|
|
memory |
• 4 GB RAM: 1 x 4 GB DDR3L |
|
||
|
|
|||
|
Use only QNAP memory modules to maintain system performance and stability. For |
|||
|
NAS devices with more than one memory slot, use QNAP modules with identical |
|||
|
specifications. |
|
||
|
|
|
Important |
|
|
|
|
|
|
|
|
|
Using unsupported modules may degrade performance, cause |
|
|
|
|
errors, or prevent the operating system from starting. |
|
|
|
|
||
Total memory slots |
2 x SODIMM DDR3L |
|
||
|
|
|
||
Maximum memory |
8 GB (2 x 4 GB) |
|
||
|
|
|
|
|
Storage |
|
|
|
|
|
|
|
||
Drive bays |
2 x SATA 6 Gbps |
4 x SATA 6 Gbps |
||
|
|
|
|
|
Drive compatibility |
• |
3.5-inch SATA hard disk drives |
|
|
|
• |
2.5-inch SATA hard disk drives |
|
|
|
• |
2.5-inch SATA solid state drives |
|
|
|
|
|
|
|
Product Overview 4
|
|
|
|
TS-x53Be User Guide |
|
|
|
|
|
Component |
|
|
TS-253Be |
TS-453Be |
Hot-swappable |
Yes |
|
|
|
|
|
|
Note |
|
|
|
|
|
|
|
|
|
SSDs using PCIe expansion slots are not hot-swappable. |
|
|
|
|
|
|
|
|
|
|
|
Network |
|
|
|
|
|
|
|
||
Gigabit Ethernet |
2 x RJ45 |
|
||
ports |
|
|
|
|
External I/O Ports & Expansion Slots |
|
|||
|
|
|
||
PCIe slots |
1 x PCIe 2.0 x2 |
|
||
|
|
|
||
USB ports |
5 x USB 3.0 |
|
||
|
• |
Front: 1 x USB 3.0 Type-A |
|
|
|
|
|
Tip |
|
|
|
|
|
|
|
|
|
You can use the One Touch Copy button with this port. |
|
|
|
|
|
|
|
• |
Back: 4 x USB 3.0 Type-A |
|
|
|
|
|||
HDMI outputs |
2 x HDMI 1.4b (up to 3840 x 2160 @ 30Hz resolution) |
|||
|
|
|
|
|
Audio |
• |
2 x 3.5 mm dynamic microphone jacks |
|
|
|
• |
1 x 3.5 mm line-out jack |
|
|
|
• |
1 x speaker |
|
|
|
|
|
Note |
|
|
|
|
|
|
|
|
|
You cannot use the speakers and the line-out jack simultaneously. |
|
|
|
|
|
|
|
|
|
|
|
Interface |
|
|
|
|
|
|
|
|
|
Buttons |
• |
Power |
|
|
|
• USB One Touch Copy |
|
||
|
• |
Reset |
|
|
|
|
|
|
|
Dimensions |
|
|
|
|
|
|
|
||
Form factor |
Tower |
|
||
|
|
|
||
Dimensions (H x W |
168 x 105 x 226 mm |
168 x 170 x 226 mm |
||
x D) |
6.61 x 4.13 x 8.90 in |
6.61 x 6.69 x 8.90 in |
||
Net weight |
1.66 kg (3.66 lbs) |
2.33 kg (5.14 lbs) |
||
|
|
|
|
|
Other |
|
|
|
|
|
|
|
||
Power supply unit |
65W, 100-240V AC, 50/60Hz |
90W, 100-240V AC, 50/60Hz |
||
|
|
|
||
System battery |
CR2032 lithium battery (3V, 225mAh) |
|
||
|
|
|
Warning |
|
|
|
|
|
|
|
|
|
When replacing the system battery, only use the same battery type |
|
|
|
|
as the existing one to avoid explosions. |
|
|
|
|
||
Sound level |
16.4 dB |
18.5 dB |
||
|
|
|
|
|
|
|
|
Note |
|
|
|
|
|
|
|
|
|
The sound levels were tested at a bystander position, which is |
|
|
|
|
within one meter from the NAS. The test NAS operated at low |
|
|
|
|
speed with the maximum number of drives installed. |
|
|
|
|
|
|
Product Overview 5
TS-x53Be User Guide
Component |
|
|
TS-253Be |
TS-453Be |
Fans |
System: 1 x 7 cm |
System: 1 x 12 cm |
||
|
|
|
|
|
|
|
|
Warning |
|
|
|
|
|
|
|
|
|
To avoid serious injuries, do not touch the fans while the NAS is |
|
|
|
|
connected to a power source. |
|
|
|
|
||
Operating |
0 to 40˚C (32 to 104˚F) |
|
||
temperature |
|
|
|
|
|
|
|
||
Relative humidity |
• |
Non-condensing relative humidity: 5 to 95% |
||
|
• |
Wet-bulb temperature: 27˚C (80.6˚F) |
|
|
|
|
|
||
Security slot |
Kensington security slot |
|
||
|
|
|
|
|
Tip
Model specifications are subject to change without prior notice. To see the latest specifications, go to https://www.qnap.com.
Package Contents
Item |
|
Quantity |
TS-x53Be NAS |
1 |
|
|
|
|
AC power adapter |
1 |
|
|
|
|
Power cord |
1 |
|
|
|
|
Ethernet cable |
2 |
|
|
|
|
Screws for 3.5-inch drives |
• |
TS-253Be: 6 |
|
• |
TS-453Be: 12 |
|
|
|
Screws for 2.5-inch drives |
• |
TS-253Be: 6 |
|
• |
TS-453Be: 12 |
|
|
|
Quick Installation Guide (QIG) |
1 |
|
|
|
|
Components
Product Overview 6
TS-x53Be User Guide
Front Panel
No. |
|
Component |
No. |
Component |
1 |
Power button |
|
4 |
USB LED |
|
|
|
|
|
2 |
Status LED |
|
5 |
USB 3.0 One Touch Copy port |
|
|
|
|
|
3 |
LAN LED |
|
6 |
USB One Touch Copy button |
|
|
|
|
|
Rear Panel
No. |
|
Component |
No. |
Component |
1 |
Speaker |
|
6 |
3.5 mm speaker jack |
|
|
|
|
|
2 |
Power input |
|
7 |
Kensington security slot |
|
|
|
|
|
Product Overview 7
TS-x53Be User Guide
No. |
Component |
No. |
Component |
3 |
Gigabit RJ-45 Ethernet ports |
8 |
3.5 mm dynamic microphone jacks |
|
|
|
|
4 |
USB 3.0 Type-A ports |
9 |
Reset button |
|
|
|
|
5 |
HDMI ports |
10 |
PCIe slot cover |
|
|
|
|
Right Panel
Note
The image does not include the chassis.
No. |
|
Component |
No. |
Component |
1 |
PCIe slot |
|
3 |
Memory slot 2 |
|
|
|
|
|
2 |
Memory slot 1 |
|
- |
- |
|
|
|
|
|
Product Overview 8
TS-x53Be User Guide
Front Drive Numbering
TS-253Be
TS-453Be
Installation Requirements
Category |
|
Item |
Environment |
• |
Room temperature: 0 to 40˚C (32 to 104˚F) |
|
• |
Non-condensing relative humidity: 5 to 95% |
|
• |
Wet-bulb temperature: 27˚C (80.6˚F) |
|
• |
Flat, anti-static surface with no exposure to direct sunlight, liquids, |
|
|
and chemicals |
|
|
|
Product Overview 9
TS-x53Be User Guide
Category |
|
Item |
Hardware and peripherals |
• |
Storage drives |
|
|
For details on compatible drives, go to https://www.qnap.com/ |
|
|
compatibility/. |
|
• |
Network cable |
|
|
|
Tools |
• |
Phillips #1 or #2 screwdriver |
|
• |
Anti-static wrist strap |
|
|
|
Setting Up the NAS
1.Place your NAS device in an environment that meets the requirements. For details, see Installation Requirements.
2.Verify that the intake vents on the bottom of the case are unobstructed.
3.Remove the protective films from the OLED screen and the front cover.
4.Install the drives.
For details, see the following topics:
•Installing 3.5-inch Hard Drives on 3.5-inch Trays
•Installing 2.5-inch Hard Drives or Solid State Drives on 3.5-inch Trays
5.Connect the power cord and all applicable cables.
6.Power on the NAS.
7.Install QTS.
For details, see QTS Installation.
8.Log on to QTS.
Product Overview 10
TS-x53Be User Guide
3. Installation and Configuration
This chapter provides specific hardware and firmware installation and configuration steps.
Hardware Installation
This section provides information on installing drives, memory modules, and expansion cards.
Drive Installation
The TS-x53Be is compatible with 3.5-inch and 2.5-inch hard drives, 2.5-inch solid state drives, and M.2 solid state drives.
Installing 3.5-inch Hard Drives on 3.5-inch Trays
Warning
•Installing a drive deletes all data on the drive.
•Observe electrostatic discharge (ESD) procedures to avoid damage to components.
1.Power off the NAS.
2.Remove the front cover.
a.Locate the lock on the left side of the NAS.
b.Slide the lock down to release the cover.
c. Slide the cover to the left and then pull.
Installation and Configuration 11
TS-x53Be User Guide
3. Remove a drive tray by simultaneously pressing the latch and pulling the tray.
4.Install a drive on the drive tray.
a. Remove the fastening panels from the sides of the tray.
Installation and Configuration 12
TS-x53Be User Guide
b.Place the drive on the tray so that the holes on the sides of the drive are aligned with the holes on the sides of the tray.
c.Attach the fastening panels.
d. Optional: Attach screws to further secure the drive.
Installation and Configuration 13
TS-x53Be User Guide
5. Load the drive tray into the drive bay.
6.Attach the front cover.
a. Align the cover with the grooves on the case, and then slide to the right.
Installation and Configuration 14
TS-x53Be User Guide
b. Slide the lock up.
7. Power on the NAS.
Installing 2.5-inch Hard Drives or Solid State Drives on 3.5-inch Trays
Warning
•Installing a drive deletes all data on the drive.
•Observe electrostatic discharge (ESD) procedures to avoid damage to components.
1.Power off the NAS.
2.Remove the front cover.
Installation and Configuration 15
Loading...