Pure Orla Kiely User Manual

Pure Warranty Statement for Australia
This statement replaces any reference to warranty which may be contained elsewhere within this manual.
What do you need to do now?
Option 1: You can register your purchase on-line at https://www.pure.com/au/register/register.asp.
Option 2: Or you can do nothing other than keep your proof of purchase as evidence of your purchase date. This proof of purchase would need to be presented if warranty service was ever required.
If you have any questions about your warranty you can call us toll free 1800 988 268.
Pure agrees to refund, repair or replace, at your election, without charge to you, any part found to be defective during the warranty period.
If equipment has been used according to its accompanying instruction manual and is used in a domestic situation, a two year warranty period applies (excludes rechargeable ChargePAK where fitted. A one year warranty period applies to all ChargePAKs).
How do you make your claim?
Call 1800 988 268 for instructions on how to return your Pure product for warranty service or go to http://support.pure.com/au/ and complete the contact us form.
What’s NOT covered by this warranty?
Under this express warranty Pure will not be liable for loss or damage of any kind whatsoever, whether direct, indirect, incidental, consequential or otherwise.
Replacement of parts due to normal wear and tear.
Products with serial number defacement, modification or removal.
Water damage or corrosion caused by dampness.
Any damage or deterioration due to shipment.
Any product which has been subjected to misuse, abuse or accident.
Australian consumers — The benefits to the consumer given by this express warranty are in addition to other rights and remedies of the consumer under a law in relation to the goods or services to which this warranty relates. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law, You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Pure is distributed and supported in Australia by PIONEER ELECTRONICS AUSTRALIA PTY LTD, 5 ARCO LANE, HEATHERTON, VICTORIA, 3202.
Thank you for choosing Evoke Mio by Orla Kiely. This manual will get you up and running in no time, and explains how to make the most of your Evoke Mio. We’re constantly improving and adding new features to our products. To take advantage of any enhancements made since your product was shipped, please visit www.pure.com where you can check for any updated versions of software and download the latest version of this user guide in PDF format.
Volume
123
456
Source
Standby Timer
Info Menu
Tune
+
1
Safety Instructions
1. Keep the radio away from heat sources.
2. Do not use the radio near water.
3. Avoid objects or liquids getting into the radio.
4. Do not remove screws from or open the radio casing.
5. Fit the mains adaptor to an easily accessible socket, located near the radio and ONLY use the mains power adapter supplied. Always switch the unit off and disconnect it from mains power before inserting or removing a ChargePAK.
Copyright
Copyright 2013 by Imagination Technologies Limited. All rights reserved. No part of this publication may be copied or distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language, in any form or by any means, electronic, mechanical, magnetic, manual or otherwise, or disclosed to third parties without the express written permission of Imagination Technologies Limited. All designs are protected by copyright. Stem design owned by Orla Kiely & D.Rowan.
Trademarks
Evoke Mio, Intellitext, ChargePAK, Pure, the Pure logo, Imagination Technologies, and the Imagination Technologies logo are trademarks or registered trademarks of Imagination Technologies Limited. All other product names are trademarks of their respective companies. Version 3 January 2013.
Warranty Information
Imagination Technologies Ltd. warrants to the end user that this product will be free from defects in materials and workmanship in the course of normal use for a period of two years from the date of purchase. This guarantee covers breakdowns due to manufacturing or design faults; it does not apply in cases such as accidental damage, however caused, wear and tear, negligence, adjustment, modification or repair not authorised by us. Please visit www.pure.com/register to register your product with us. Should you have a problem with your unit please contact your supplier or contact Pure Support at the address shown on the rear of this manual.
Disclaimer
Imagination Technologies Limited makes no representation or warranties with respect to the content of this document and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Further, Imagination Technologies Limited reserves the right to revise this publication and to make changes in it from time to time without obligation of Imagination Technologies Limited to notify any person or organisation of such revisions or changes.
2
Contents
4 Start
4 Quick set up
5 Controls at a glance
5 Rear connectors
6 Using your Evoke Mio
6 Adjusting and muting the volume
6 Changing stations
7 Changing the information shown on screen
7 Pausing and controlling scrolling text
8 Setting the alarm & timers
8 Setting the alarm
9 Cancelling an alarm
10 Setting the kitchen timer
10 Setting the sleep timer
11 Presets and Intellitext
11 Storing and selecting presets
12 Intellitext
13 Setup options
13 Options available in digital radio
13 Options available in FM radio
13 General options
15 Energy saving
15 Software Updates
16 Using a ChargePAK
16 Installing a ChargePAK
16 General notes for use
17 Help and Specifications
17 Secondary and inactive stations
17 Hints and tips
18 Technical Specifications
3
Start
Quick set up
•Unclip the aerial and fully extend it (steps A and B).
1
• Insert the jack of the supplied mains adapter into the socket on the rear of the
radio (C).
•Plug the mains adapter into the mains supply (D).
B
A
Stereo Out
Aux In
6V DC
Select your language when prompted. Turn the tune dial to select (English/
2
D
Stereo Out
Aux In
6V DC
6V DC
C
6V DC
Francais/Deutsch/Italiano) and push to confirm.
Tune
Tune
ect Language. Choisissez Deutsch
This will be followed by the Energy Saving mode screen.
3
By default, Energy saving is enabled but it can be switched off from within the menu (see page 15).
Energy saving Enabled
With energy saving on, power consumption in standby is less than 1W.
Wait for your radio to complete an Autotune and find all available digital
4
stations. When the Autotune is complete, a station will start playing.
Pure Evoke Mio 29
4
Now tuning...
1
BBC Radio 2 Talking to the people wh
Controls at a glance
Volume dial
Adjust and mute volume (see page 6).
Source
Press to select Digital radio, FM radio or Auxiliary input (see page 6).
Source
Standby
Standby Timer
Switch the radio into standby or off if a ChargePAK is fitted (see page 16).
Timer
Alarm (see page 8). Kitchen timer (see page 10). Sleep timer (see page 10).
Volume
123
456
Tune
Info Menu
+
Info
Change the information shown on screen (see page 7).
Tune dial
Browse and select radio stations (see page 6) or pause and rewind scrolling text (see page 7).
Presets 1 − 6+
Store up to 30 digital or FM radio preset stations (see page 11).
Menu
Use Intellitext (see page 12). Setup options (see page 13).
Light sensor
Auto-adjusts the display brightness (see page 14).
Rear connectors
Stereo Out
3.5 mm
stereo headphone socket.
Connect to an external amplifier.
Aux In
Analogue stereo input for iPod, MP3 player, etc.
Mini-B type USB connector for upgrades only.
6V DC
Connect to supplied mains adapter only.
5
Loading...
+ 15 hidden pages