ISOLATORS
38
ProSafeFS Series
Galvanic Isolator
Protecting your Boat’s Outdrive, Props and Metal Fittings while Maximizing
Zinc Life...
The ProSafe FS Series of FailSafe 30 and 60 Amp Galvanic Isolators will interrupt
galvanic current ow with other boats at a marina when installed on a boat which is
connected to AC Shore Power. This technology maintains AC safety ground and solves
the most common forms of corrosion and premature zinc loss within a boats bonding
system. The ProSafe FS Series is UL Certied to meet the parameters of the ABYC A-28
recommendation ProSafe FS installs easily and does not require a dedicated monitor
to verify the operational status of the galvanic isolator as required by non FailSafe
Certied galvanic isolators. Both the ProSafe 30 and 60 Amp models are built on
robust Flat Pack Semiconductor platforms, ensuring that in the event of a failure, the
failure is safe by not compromising the ground continuity on-board when connected
to AC Shore Power.
• ABYC A-28 July ’08 Compliant and Fail Safe Certied
Certied by Underwriters Laboratories (UL). Insures shore power safety ground wire
is maintained through the isolator.
• Flat Pack High Power Semiconductors
Robust high power diodes allow the FS Series to meet the new FailSafe criteria for
conducting inrush currents 3,000 and 5,000 amps (FS30 and FS60 respectively) for
the required duration period.
• Innovative Design
The FS60 will cool itself in the event it must conduct current insuring cooler operation
in this mode.
• Ignition Protected
Meets ISO 8846 and either model can be mounted within an engine compartment.
• Gold Plated Terminations
Simply install in your on board green safety ground wire (between your AC inlet and your
AC Panel) to separate your D.C. Bonding System from your Shore A.C Green wire.
• ProSafe FS30 for 30 Amp Shore Cord Applications. ProSafe FS60 for (1) 50 Amp or (2) 30
Amp Shore Cord Applications
• 5 Year Warranty
Model ProSafeFS30 ProSafeFS60
Part # 22034 22074
Shore Cord Inlet
Compatibility
Ratings V AC / AMPs / Hz 120/240V AC / 41A / 50 or 60 Hz 120/240V AC / 82A / 50 or 60 Hz
Max Temp. 50˚ C 50˚ C
Size 6.75"x7"x2.5" 7.25"x6.5"x3.75"
Weight 3 lbs 3.7 lbs
Unprotected Outdrives Unprotected sail driveUnprotected and premature transom & outdrive zinc loss
Single 15, 16, 20 or 30 120/240V AC / 82A / 50 or 60 Hz
Loading...