Proel SW118H, SW115HA, SW115, SW110 Specification
SW SERIES
The SW Series is a range of sub-woofers designed by PROEL to complement the full-range speakers belonging to NET, FLASH, XENIA and XEOS Series. The variety of size, power and SPL o ered by the four SW models provides the perfect low extension solution for of all the full-range speakers from the mentioned series.
All the SW models feature large VC woofers and a band-pass design, providing very ‘punchy’, dynamic lows together with an extended low frequency response.
The CLASS H and CLASS D amplifier modules can generate up to 1000W of continuous power in a compact and reliable package. All the modules include a STEREO pre-amp section, 24dB/oct. crossover filters with selectable frequency and PHASE reverse switch.
The cabinets are built with 15/18mm plywood and feature 2 or 3 metal handles and sturdy 75mm wheels for an easy transport (except SW110).
SW118H
18”DIE-CAST CELESTION WOOFER WITH 4”VC
1000W CLASS D AMPLIFIER WITH SMPS
PASSIVE VERSION AVAILABLE
SW118H combines a high-performance CELESTION loudspeaker with a cutting edge digital amplifier that can provide 1000 W of power. The result is a sub-woofer that can deliver surprising output levels and very deep bass. SW118HA can be used in combination with FLASH15HA, NET15A and NET215A to form high-power sound systems that can provide reinforcement for very large open spaces.
SW115HA
15”CELESTION WOOFER WITH 3”VC
500W CLASS D AMPLIFIER WITH SMPS
FOUR 75MM WHEELS AND 2 METAL HANDLES
SW115HA is a high-power 15” sub-woofer housed in a very compact and light-weight cabinet. Thanks to the highly e cient CELESTION woofer and to the newly-designed CLASS D light-weight amplifier, it can provide an outstanding sound pressure level with a very extended frequency response. SW115HA can provide the optimal low-frequency extension to our NET12A and FLASH12HA systems.
SW115
15”WOOFER WITH 3”VC
350W CLASS H AMPLIFIER
PASSIVE VERSION WITH BUILT-IN CROSSOVER FILTER
FOUR 75MM WHEELS AND 2 METAL HANDLES
Based on a BPS configuration (series-loaded band pass), SW115 deliver a very high e ciency and a quick dynamic response at low frequencies. The active version (SW115A) features a 350 W class H amplifier with a stereo crossover with selectable frequency and phase controls and it is the perfect match for NET10, FLASH12A or for a couple of FLASH8A.The passive version (SW115P) features a built-in crossover with filtered output for the satellite.
SW110
10”CELESTION WOOFER WITH DUAL 2”VC
250W CLASS D AMPLIFIER
PASSIVE VERSION WITH BUILT-IN STEREO CROSSOVER FILTER
The SW110 is a low profile, very compact sub-woofer designed to be used in ultra-portable multi-way systems or in fixed installations requiring an extended low frequency response. Despite to the small size, SW110A is capable of producing a high output level with punchy lows and it is the ideal complement to FLASH8A or to a pair of FLASH5A.Thanks to the dualvoicecoil and to the stereo crossover, the SW110P can form, together with FLASH5P and with several models from XENIA and XEOS series, simple and cost-e ective installation systems that can be powered using just one stereo amplifier.
TECHNICAL SPECIFICATIONS
|
SW110P |
SW115P |
SW115HA |
SW118HP |
System type |
Bandpass enclosure subwoofer |
BPS enclosure subwoofer |
BPS enclosure subwoofer |
Bandpass enclosure subwoofer |
Nominal Impedance |
8 + 8 |
8 |
- |
8 |
Power Handling (continuous) |
100 + 100 W |
350 W |
- |
1000 W |
Power Handling (peak) |
200 + 200 W |
700 W |
- |
2000 W |
Frequency Response |
46 Hz - 160 Hz |
40 Hz - 160 Hz |
- |
34 Hz - 170 Hz (without filter) |
Sensitivity |
95 dB @ 1 W/1 m |
97 dB @ 1 W/1 m |
- |
98 dB @ 1 W/1 m |
Driver |
10” woofer - 2 x 2.5” VC |
15” woofer - 3” VC |
15” woofer - 3” VC |
18’’ woofer - 4” VC |
Crossover Frequency |
160 Hz, 12 dB/oct LP - 6 dB/oct HP |
160 Hz, 12 dB/oct LP - 6 dB/oct HP |
- |
suggested 80 - 125 Hz |
Connectors |
BINDING POST (IN/OUT) |
2 x NEUTRIK SPEAKON (IN/OUT) |
- |
2 x NEUTRIK SPEAKON (IN/LINK) |
Cabinet |
15/18 mm plywood |
15/18 mm plywood |
15/18 mm plywood |
15/18 mm plywood |
|
Black anti-scratch paint |
Black anti-scratch paint |
Black anti-scratch paint |
Black anti-scratch paint |
|
1 handle |
1.5 mm metal grille |
1.5 mm metal grille |
1.5 mm metal grille |
|
1 x pole holder |
2 x steel handles |
2 x steel handles |
3 x steel handles |
|
|
1 x pole holder |
1 x pole holder |
1 x pole holder |
|
|
4 x 75 mm wheels |
4 x 75 mm wheels |
4 x 75 mm wheels |
Weight |
15.5 kg (34.2 lb) |
29 kg (63.9 lb) |
- |
45 kg (100 lb) |
Dimensions (W x H x D) |
520 x 330 x 350 mm |
430 x 550 x 600 mm |
430 x 550 x 600 mm |
595 x 700 x 700 mm |
|
SW110A |
SW115A |
|
SW118HA |
Amplifier Continuous Power |
250 W |
350 W |
|
1000 W |
Frequency Response |
46 Hz - 160 Hz |
40 Hz - 160 Hz |
|
34 Hz - 140 Hz |
Max SPL |
122 dB |
126 dB |
|
131 dB |
Connectors |
IN: 2 x NEUTRIK COMBO |
IN: 2 x NEUTRIK COMBO |
|
IN: 2 x NEUTRIK COMBO |
|
OUT: 2 x NEUTRIK XLR-M |
OUT/LINK: 2 x JACK ¼’’, 2 x XLR-M |
|
OUT: 2 x NEUTRIK XLR-M |
|
LINK: 2 x NEUTRIK XLR-M |
Volume, Stereo/Mono, Flat Out |
|
LINK: 2 x NEUTRIK XLR-M |
Controls |
Volume, GND lift |
GND lift, X-over frequency, Phase |
|
Volume, GND lift |
|
X-over Frequency, Phase |
|
|
X-over Frequency, Phase |
Power Supply |
230 VAC 50/60 Hz |
230 VAC 50/60 Hz |
|
230 VAC 50/60 Hz |
Weight |
120 VAC 60 Hz |
120 VAC 60 Hz |
|
120 VAC 60 Hz |
|
18 kg (39.7 lb) |
32 kg (70.6 lb) |
|
48.5 kg (107 lb) |
Loading...