Prince Castle 965-D Operator’s Manual

OPERATING
INSTRUCTIONS
Limited Warranty
This product is warranted to be free from defects in material and/or workmanship at the time of delivery only. A Proof of Purchase is required
for all warranty claims.
Note: Although the cutting bars are not sharp,
please keep fingers and foreign objects away
!
from cutting bars to prevent injury or damage to slicer.
Installation
1. After you have removed the Chicken Slicer from the carton, inspect the unit for signs of damage. If there is damage to the unit:
Notify carrier within 24 hours after delivery.
Save carton and packing materials for inspection purposes.
Contact the Prince Castle Customer Sales Department at 1-630-462-8800 to arrange for a replacement to be sent.
2. Verify that all parts have been received.
Operation
1. Use only boneless chicken.
2. Thoroughly cook chicken before slicing.
3. Place cooked chicken on slotted platform.
4. Lay cutting bars on top of chicken and press down firmly.
5. Use spatula to remove sliced chicken from frame and lift cutting bars to repeat process.
6. Use nylon brush (Prince Castle part no. 943-042) to remove any pieces of chicken left on cutting bars or slotted platform.
Caution: Pieces of chicken left on cutting bars
!
or slotted platform may cause tearing of chicken or damage to the slicer. Inspect the slicer after each use.
Cleaning
Regularly throughout the day and at closing, thoroughly clean and sanitize the Chicken Slicer.
1. Remove the hinge pin to release the cutting bars and slotted platform.
2. Spray the slicer parts with hot water to loosen chicken residue.
3. Brush the cutting bars and slotted platform with a nylon cleaning brush.
4. Wash the chicken slicer in cleaning solution, hot soapy water, or a dishwasher.
5. Rinse by spraying the slicer with hot water.
6. Soak/rinse the chicken slicer with sanitizer.
7. Allow to air dry.
Prince Castle, Inc. Printed 04/04
355 E. Kehoe Blvd. • Carol Stream, IL 60188
Tel: (630) 462-8800 • Fax (630) 462-1460
Toll Free: 1-800-323-2930
965-502 Rev A
Handle Kit 965-059S
Hinge Pin 965-066S
Parts Identification
Cutting Bars Assy. 965-063S (965-B) 965-129S (965-C) 965-123S (965-D)
Slotted Platform 965-062S (965-B) 965-141S (965-C) 965-142S (965-D)
Rubber Feet (pkg. 4) 197-232S
Troubleshooting
1.Make sure cutting bars and slotted platform are cleared of any chicken pieces. Difficulty in cutting
2.Inspect cutting bars. Replace if bars are bent, twisted, or broken.
3.Inspect slotted platform. Straighten or replace if bent.
Prince Castle, Inc. Printed 03/05
355 E. Kehoe Blvd. • Carol Stream, IL 60188
Tel: (630) 462-8800 • Fax (630) 462-1460
Toll Free: 1-800-323-2930
965-502 Rev B
Loading...