Presonus UNIVERSAL CONTROL 1.1 User Manual

Universal Control 1.1 svn 2108 Update

StudioLive users only

Please Note: With any rmware update there is a small risk that some scenes
or presets will be lost, because of this, it is highly recommended that you back
up your scenes and presets in VSL prior to running the Universal Control svn
2108 update.

This Universal Control update contains a rmware update to resolves two known
issues with the StudioLive 24.4.2 mixer and contains the following improvements

StudioLive 24.4.2: Resolves known refresh issue with channels 17

Mix 1

StudioLive 24.4.2: Resolves known refresh issue with FXA & FXB returns in

Aux Mix 1

StudioLive 16.4.2 & 24.4.2: Improves GEQ algorithm to allow for faster curve

ret with fewer artifacts during drastic changes to the EQ curve

Updates StudioLive 16.4.2 to rmware version 1.13 build 158
Updates StudioLive 24.4.2 t o rmware version 1.0 build 166

Installation Instructions (Mac and Windows)

1. Quit out of Universal Control and disconnect your unit from your computer.

2. Run the installer and follow the onscreen instructions. Both installers require
that your computer be rebooted upon successful their completion.

3. Once your computer has restarted, connect your FireStudio or StudioLive
series device and open Universal Control

4. Open the Launch Window and go to Settings>Check Firmware to verify that

5.
will be given the option to Restore your user presets and scenes back to your

10

s rmware is up to date

: Once your StudioLive rmware has been updated, you

20 in Aux

be undone.

Known Issues (VSL 1.1 only)

To assign a channel or FX bus to a Subgroup from within the Channel tab, the

the StudioLive or from within the Overview tab.

VSL and rmware updater will not launch on Mac PPC machines. PPC users

can continue to use the 3.5.2 driver as normal without control panel features.

StudioLive 16.4.2 only, LCD doesn t display current frequency band and gain

changes in real

Aux Post and Solo aren t linked between cascaded mixers.

time.

correctly to Faders set to

inf in VSL