Planet IVC-234GT User Manual

IVC-234GT
Industrial 1-Port BNC/RJ11 to 4-Port Gigabit Ethernet Extender
Long Reach Ethernet
• ITU-T G.993.5 G.Vectoring and G.INP
• Upstream/Downstream bandwidth up to 200/100Mbps
• CO/CPE mode selectable via DIP switch
• Selectable target band plan and SNR margin
• One BNC/RJ11 connector for VDSL connection
• Uses existing RG59/RG6 coaxial cable
• Used in pairs to extend Point-to-Point connection up to
1.2km
High Performance Industrial Gigabit Ethernet Extender
To fulll the needs of long distance and higher speed required Ethernet over Coaxial
or 2-wired UTP applications, PLANET Technology offers a new Industrial Ethernet
Extender, IVC-234GT. It features one BNC port and one RJ11 port for long-distance
connection with the VDSL2 (Very-high-bit-rate Digital Subscriber Line 2) technology,
and 4 10/100/1000BASE-T RJ45 Ethernet ports. Its slim-sized metal housing makes
network, the IVC-234GT provides an excellent bandwidth of up to a total duplex
data rate of 300Mbps which can extend a maximum distance up to 1.2km.
If the IP network that consists of HD IP camera, wireless access point, NVR and
digital signage display requires an extension of beyond the 100-meter distance, the
IVC-234GT will be the best option as it can transmit data over the coaxial cable or
telephone wire. A 100-meter distance can only be extended on an UTP cable.
• Supports IEEE 802.1Q VLAN tag transparency
Industrial Case and Installation
• Slim-type IP30 metal case
• DIN rail and wall-mount design
• 12 to 48V DC, redundant power with polarity reverse
protect function
• AC 24V power adapter acceptable
• Supports 6000 VDC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
• Minimum installation time (Simply by Plug and Play)
• Supports extensive LED indicators for network diagnosis
1
IVC-234GT
1 2 3 4
ON
P1 P2
CPE CO
VDSL
FAULT
CO G.INP Asymm 12dB
CPE Inter
Symm
8dB
1 2 3 4
ON
P1 P2
CPE CO
VDSL
FAULT
BNC
BNC RJ11
RJ11
4
3
2
1
10/
CO G.INP Asymm 12dB
CPE
Inter
8dB
VDSL Port
1 2 3 4
ON
P1 P2
CPE CO
VDSL
FAULT
CO G.INP Asymm 12dB
CPE Inter
Symm
8dB
1 2 3 4
ON
P1 P2
CPE CO
VDSL
FAULT
BNC
BNC RJ11
RJ11
4
3
2
1
10/
CO G.INP Asymm 12dB
CPE
Inter
8dB
VDSL Port
1 2 3 4
ON
P1 P2
CPE CO
VDSL
FAULT
CO G.INP Asymm 12dB
CPE Inter
Symm
8dB
BNC
BNC RJ11
RJ11
4
3
VDSL Port
1 2 3 4
ON
P1 P2
CPE CO
VDSL
FAULT
CO G.INP Asymm 12dB
CPE Inter
Symm
8dB
BNC
BNC RJ11
RJ11
4
3
VDSL Port
Superior Upstream and Downstream Transmission
The design of the IVC-234GT is based on the two-core networking technology, Gigabit Ethernet and VDSL2. The IVC-234GT offers a stable yet high-speed
point-to-point network access up to a duplex data transmission of 300Mbps. It provides 2 selective transmission modes -- asymmetric mode or symmetric
mode -- for the transmission of upstream and downstream signals.
■ Symmetric mode – downstream up to 150Mbps and upstream up to 150Mbps
The symmetric mode provides the similar transmission rate on both downstream and upstream while the asymmetric mode performs higher transmission
quality in short range. In all, when the IVC-234GT is in the symmetric mode, it provides a better upstream performance, and when it is in the asymmetric
mode, it gives a better downstream performance.
Ethernet over Long Distance Existing Coaxial or RJ11 Cable
The IVC-234GT is also a Long Reach Ethernet (LRE) solution which provides a quick replacement and smooth migration solution from the existing analog
system to full digital system. It features two types of transmission, the coaxial or RJ11. A normal UTP cable can only be extended up to 100 meters, but with
the IVC-234GT, the distance for Ethernet networking can be extended up to 1,200 meters (3,937ft.), which is ideal for the following network applications:
If you have coaxial or RJ11 cable in your existing environment, you can install a pair of the IVC-234GT very simply without the need to build additional
network wires, thus saving costs for network construction.
Asymmetric mode – downstream up to 200Mbps and upstream up to 100Mbps
Long-distance IP network devices
IP digital signage
Cable TV to IPTV
Distance video education
Electronic billboards
Other applications
BNC and RJ11 Connection Diagrams
P1 P2
FAULT
CPE CO
VDSL
ON
1 2 3 4
CO
CPE
G.INP
Inter
Asymm
Symm
12dB
8dB
1000
1
10/
100
2
IP Camera
IP Camera
3
4
RJ11
BNC
BNC RJ11
VDSL Port
P1 P2
FAULT
CPE CO
VDSL
ON
1 2 3 4
CO
CPE
G.INP
Inter
Asymm
Symm
12dB
8dB
1000
1
10/
100
2
3
4
RJ11
BNC
BNC RJ11
VDSL Port
No Connection
Coax.
VDSL2
No Connection
P1 P2
FAULT
CPE CO
VDSL
ON
1 2 3 4
CO
CPE
G.INP
Inter
Asymm
Symm
12dB
8dB
1000
1
10/
100
2
RJ11
BNC
BNC RJ11
3
4
VDSL Port
Switch
CPE ModeCO Mode
P1 P2
FAULT
CPE CO
VDSL
ON
1 2 3 4
CO
CPE
G.INP
Inter
Asymm
Symm
12dB
8dB
1000
1
10/
100
2
RJ11
BNC
BNC RJ11
3
4
VDSL Port
Switch
CPE ModeCO Mode
VDSL2
Coax.
1000BASE-T UTP
VDSL2 Coaxial Cable
Coaxial Cable
2
IVC-234GT
PC PC
1 2 3 4
ON
1 2 3 4
ON
Ethernet over Coaxial
VDSL2 Coaxial Cable
VDSL2
Up to 1200m
LAN to LAN Connection
1000BASE-T UTP
LAN 1 LAN 2
IVC-234GT
(CO)
IVC-234GT
(CPE)
VDSL2
Easy and Flexible Installation
The IVC-234GT offers two operation modes, the client-side CPE and central-side CO, making any network applications easy and flexible. The CPE or CO
mode can be adjusted by using the built-in DIP switch. For point-to-point connection, one IVC-234GT in CPE mode and the other one in CO mode must be
set up as a pair of converters to perform the connection. This enables the administrator to efficiently manage the network over coaxial cable, making long-
distance transmission better.
ADSL2+ Fallback
For ISPs providing ADSL broadband services, the IVC-234GT can support a downstream rate of up to 24Mbps and an upstream rate of 1Mbps with the
ADSL2+ technology. The IVC-234GT can also be directly switched over to VDSL2 after the network upgrade.
Applications
Point-to-Point Application -- LAN to LAN Connection
One set of the IVC-234GT could be used to link two local Area networks that are located in different places. Through the coaxial cable, it could set up a
200/100Mbps asymmetric backbone, but one IVC-234GT must be Master (CO mode) and the other one is Slave (CPE mode).
3
IVC-234GT
Community/Campus Surveillance and Security over IP
To take advantage of digital surveillance system and keep the benets of coaxial cable/RJ11 of the IVC-234GT, communities, campuses and enterprises can
upgrade their analog camera system to IP camera surveillance system without using additional new wires. As the IVC-234GT comes with one RJ45 port and
one BNC Ethernet over Coaxial port, just plug in the UTP cable of IP camera to the Ethernet port and the existing coaxial cable to the BNC connector to
easily deploy and extend the distance with signal conversion by transmitting the Ethernet data from the standard coaxial cable.
Applications of IP Surveillance
LAN 2LAN 1
IP Camera
L2+ Switch
ON
1 2 3 4
ON
1 2 3 4
IP Camera
VDSL2
Ethernet over Coaxial
Up to 1200m
NVR
IVC-234GT
(CPE)
Specications
Product
Hardware Specications
TP inter face 4 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
BNC
Interface
RJ 11
DIP Switch & Functionality
LED Indicator
ESD Protection 6KV DC
Enclosure IP30 slim metal case
Installation DIN- rail kit or wall-mount ear
Dimensions (W x D x H) 32 x 135 x 87.8mm
Weight 185g
Power Requirement
Power Consumption 5.7 watts
IVC-234GT
1 BNC female Ethernet over C oaxial port
Cabling
Maximum Distance Max. 1.2km with data transmission (3.937ft.) 1 VDSL2/ADSL2+ RJ11 female phone jack
Twisted-pair telephone wires (AWG-24 or better) up to 1.2km (3.937ft.) DIP-1 Select CO or CPE mode DIP-2 Select G.IN P or Interleaved mode DIP-3 Select Band Prole (Asymmetric or Symmetric) DIP-4 Select SNR of 12dB or 8 dB Power 1/Power 2: Green
FAULT: Red 1000BASE-T LNK/ACT: Green 10/100BASE-TX LNK/ACK: Green VDSL: Green CO: Green CPE: Green
DC input: Dual 12~48V DC, 0.4A max. 24V AC
Coaxial cable: 75 ohm RG- 6/U cable, less than12Ω/100 0 ft RG-59/U cable, less than 30Ω/1000 f t.
IVC-234GT
(CO)
VDSL2
IP Camera
IP Camera
VDSL2 Coaxial Cable
1000BASE-T UTP
4
Performance
Switch Distance
CO DIP
(meters)
200 93/190 85/174 143/148 132/136 400 67/164 59/146 118/119 103/104 600 38/116 28/94 71/75 59/60 800 24/59 22/49 49/36 38/27
1000 9/45 7/40 21/25 15/24
Upstream/ Downstream Performance Table with RJ11 Cable
1200 6/30 3/28 16/24 6/20
Switch Distance
CO DIP
(meters)
200 92/190 85/174 143/148 129/136 400 68/165 57/144 116/115 99/96 600 37/112 28/94 71/69 61/55
800 27/56 22/49 49/32 39/24 1000 9/46 7/40 19/27 15/26 1200 5/31 3/28 16/23 12/20
Switch Distance
CO DIP
(meters)
200 84/184 75/169 131/144 125/128
400 49/148 54/128 93/118 89/99
600 36/100 26/80 77/66 64/53
800 21/50 17/39 44/30 37/26
Upstream/ Downstream Performance Table with Coaxial Cable
1000 7/42 5/29 20/25 19/28 1200 5/27 3/28 13/27 15/20
Switch Distance
CO DIP
(meters)
200 89/185 79/166 140/144 117/123
400 57/155 47/137 104/113 89/96
600 33/75 31/73 62/73 52/43
800 17/66 13/45 40/29 39/24 1000 13/59 6/38 20/27 15/26 1200 4/32 3/22 14/20 12/20
Switch Specications
Switch Processing Scheme Store-and-Forward
Address Table 2K entries
Flow Control
Jumbo Packet Size 9K bytes
System Specications
VDSL Compliance
ADSL Compliance
System Specications
Standards Compliance
Regulatory Compliance FCC Part 15 Class A, CE
Back pressure for half duplex IEEE 802.3x pause frame for full duplex
VD SL- DMT ITU-T G.993.1 VDSL ITU-T G.997.1 ITU-T G.993.2 VDSL2 (Prole 17a/30a Support) ITU-T G.993.5 G. Vector ing ITU-T G.998 G.INP
Capable of ADSL2/2+ standard ITU G.992.3 G.dmt.bis ITU G.992.5 G.dmt.bisplus Data Rate: Up to 24Mbps
IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet ITU-T G.993.1 VDSL ITU-T G.997.1 ITU-T G.993.2 VDSL2 (Prole 17a/30a Support) ITU-T G.993.5 G.Vectoring and G.INP ITU-T G.998
IVC-234GT
Interleave (Upstream/Downstream)
Asymmetric Symmetric
8dB 12dB 8dB 12dB
Interleave (Upstream/Downstream)
Asymmetric Symmetric
8dB 12dB 8dB 12dB
Interleave (Upstream/Downstream)
Asymmetric Symmetric
8dB 12dB 8dB 12dB
Interleave (Upstream/Downstream)
Asymmetric Symmetric
8dB 12dB 8dB 12dB
5
Environment
Top View
Temperature
Humidity
Diagram
Operating: -40 ~75 degrees C Storage: -40~75 degrees C
Operating: 5~95% (non-condensing) Storage: 5~95% (non-condensing)
V1+ V1- V2+ V2-
PWR1
PWR2Fault
Input
DC12~48V, AC 24V
Side View Front View
P1 P2
CPE CO
VDSL
ON
1 2 34
CPE Inter
Symm
8dB
1000
10/ 100
IVC-234GT
1A@24V
Mounting Kit
Side View
FAULT
CO G.INP Asymm 12dB
1
2
3
4
Rear View
DIN-Rail Kit
RJ11
BNC
BNC RJ11
Bottom View
Dimensions ( unit = mm )
Ordering Information
IVC-234GT Industr ial 1-Por t BNC/RJ11 to 4-Port Gigabit Ethernet Extender
Related Products
VC- 231G 1-Por t 10/100/1000T Ethernet to VDSL2 Converter
VC-23 4G 4-Port 10/100/100 0T Ethernet to V DSL2 Bridge
VC-232G 1-Por t 10/100/1000T Ethernet over Coaxial Conver ter
VC- 231GP 1-Por t 10/100/1000T 802.3at PoE + Ethernet to VDSL2 Converter
Mounting Kit
PLANET Technology Corporation
11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 Email: sales@planet.com.tw www.planet.com.tw
IVC-234GT
PLANET reserves the right to change specications without prior notice. All brand names and trademarks are property of
their respective owners. Copyright © 2018 PLANET Technology Corp. All rights reserved.
6
Loading...