ISW-801T
8-Port 10/100TX Industrial Fast Ethernet Switch
(-40~75 degrees C operating temperature)
Physical Port
• 8-port 10/100BASE-TX RJ45 with auto MDI/MDI-X function
Layer 2 Features
• Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-
TX Ethernet standard
• Supports auto-negotiation and 10/100Mbps half/full duplex
Slim Type with more Practicability and Convenience
PLANET ISW-801T, an Industrial 8-port Fast Ethernet Switch, provides non-blocking
wire-speed performance in harsh industrial environment. It also provides 8-port
10/100BASE-TX RJ45 copper interfaces delivered in an IP30 rugged, strong case with
redundant power system. Its slim case is suitable for such applications as surveillance
system deployments, control management and wireless service in climatically demanding
environments with wide temperature range from -40 to 75 degrees C.
Energy Saving with Lower Power Consumption
The ISW-801T, adopting the advanced green networking technology, provides the IEEE
802.3az protocol based power saving. This feature makes the ISW-801T consume very
low power in full load operation mode, , which helps conserve energy effectively but
maintains high performance efciently.
Stable Performance under Difcult Environments
The ISW-801T provides a high level of immunity against electromagnetic interference
and heavy electrical surges which are usually found on plant oors or in curb-side trafc
control cabinets. Being able to operate under the temperature range from -40 to 75
degrees C, the ISW-801T can be placed in almost any difficult environment. The ISW-
801T also possesses an integrated power supply source with wide range of voltages (12
to 48V DC, 24V AC) for worldwide high availability applications requiring dual or backup
power inputs.
mode
• High performance Store and Forward architecture; runt/CRC
ltering eliminates erroneous packets to optimize the network
bandwidth
• Prevents packet loss with back pressure (half-duplex) and
IEEE 802.3x pause frame ow control (full-duplex)
• Backplane (switching fabric): 1.6Gbps
• Integrated address look-up engine, supporting 1K absolute
MAC addresses
• Automatic address learning and address aging
Industrial Case & Installation
• IP30-rated metal case
• DIN rail and wall-mount design
• 12 to 48V DC, redundant power with polarity reverse
protection function and connective removable terminal block
for master and slave power, 24V AC power support
• Lower Power Consumption device in full load operation mode
• Supports EFT protection for 6000 VDC for power line
• Supports 6000 VDC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
• Free fall, shock-proof and vibration-proof for industries
IP camera IP camera
Control Room Robotic Automation
ISW-801T
Robotic Automation System
100BASE-TX UTP
1
ISW-801T
Robust Switch Performance
Built in a high-performance switch architecture, the ISW-801T comes with eight 10/100Mbps Fast Ethernet ports providing non-blocking switch fabric and
wire-speed throughput as high as 1.6Gbps, and the 1K MAC address. Thus, the ISW-801T can transfer wire-speed packets without the risk of packet loss.
The ow control function enables the ISW-801T to provide fast and reliable data transfer.
All of the RJ45 copper interfaces in the ISW-801T support 10/100Mbps auto negotiation for optimal speed detection through RJ45 Category 5 or 5e cables.
The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight-through or crossover
cables.
Applications
Industrial Area Switch for Data Collection and Forwarding
The ISW-801T’s IP30-rated metal case is particularly designed for the most heavy industrial demanding environments, such as factories, harbors,
warehouses, and more. When installed at these establishments, it can enhance the work performance of these establishments by speedily transferring
incoming and outgoing data.
Internet
Camera
ISW-501T
Harbor
Internet
Camera
100m
Control Center
Industrial
Serial
Converter
PLC
I/O
ROBOT
I/O
I/O
Factory
ISW-801T
ROBOT
100m
100m
Industrial
Serial
Converter
Internet
Camera
Backbone Switch
I/O
Warehouse
I/O
ISW-501T
Serial Device
Server
Internet
Camera
PLC
100BASE-TX UTP
DI/DO
2
Specications
ISW-801T
Model
Hardware Specications
10/100BASE-TX Auto MDI/MDIX Ports 8
LED Indicators
Enclosure IP30 -rated metal case
Dimensions (W x D x H) 135 x 87 x 32 mm
Weight 428g
ESD Protection 6KV DC
EFT Protection 6KV DC
Power Requirements 12~48V DC, redundant power with polarity reverse protection function, 24V AC power support
Power Consumption / Dissipation 2.1 w atts / 7.1BT U
Installation DIN rail kit and wall-mount ear
Alarm
Connector
Switch Specications
Switch Processing Scheme Store-and-Forward
Address Table 1K
Buffer Memory Embedded 448K bits packet buffer
Flow Control
Switch Fabric 1.6Gbps
Throughput (packet per second) 1.19Mp p s
Network Cables
Standards Conformance
Standards Compliance
Temperature
Humidity Operating: 5% to 95%, Storage: 5% to 95% (non-c ondensing)
Regulatory Compliance FCC Part 15 Class A, CE
Stability Testing
ISW-801T
3 x LED for System and Power
–Green: DC Power 1
–Green: DC Power 2
–Green: Power Fault
1x LED for each Copper Por t
–Green: 10/100 LNK/ACT
Provides one relay output for power failure
Alarm relay current carr y ability: 3A @ DC 30V
Removable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
Back pressure for half duplex,
IEEE 802.3x pause frame for full duplex
10BASE-T: 2-pair UTP Cat. 3, 4, 5, up to 100 meters
100BASE-TX: 2-pair UTP Cat. 5, 5e up to 100 meters
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3x Full Duplex Flow Control
IEEE 802.3az Energy Efcient Ethernet
Operating: -40~75 degrees C
Storage: -40 ~75 degrees C
IEC60 068 -2-32 (free fall)
IEC60068-2-27 (shock-proof)
IEC60068-2-6 (vibration-proof)
Ordering Information
ISW -801T 8-Port 10/100TX Industrial Fast Ethernet Switch (-40~75 degrees C operating temperature)
3
Side View
ISW-801T
Bottom View
87.80
30.00
135.00
Front View
15.20
P1 P2 FAULT
10/100
LNK
ACT
ISW-801T
32.00
87.80
18.0028.00
48.8046.50 39.70
Rear View
18.00
53.50 53.50
Mounting Kit
28.00
28.0018.00
28.00
40.00
48.80
DIN-Rail Kit
40.00
28.00
9.20
1
2
3
4
135.00
5
6
7
8
Top View
87.80
97.10
Related Products
IS W - 511/I S W - 511S 15
IS W - 511T/ ISW - 511TS 15
ISW- 621/ISW-621S15
ISW -621T/ ISW- 621T S15
ISW -501T
PLANET Technology Corporation
11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231,
Taiwan (R.O.C.)
Tel: 886-2-2219-9518 Fax: 886-2-2219-9528
Email: sales@planet.com.tw www.planet.com.tw
4-Port 10/100 BASE-TX + 1- Port 100BASE-FX Industrial Fast Ethernet Switch
(-10~ 60 degrees C operating temperature)
4-Port 10/100 BASE-TX + 1- Port 100BASE-FX Industrial Fast Ethernet Switch w/ Wide Operating Temperature
(-40~75 degrees C)
4-Port 10/100 BASE-TX + 2- Port 100BASE-FX Industrial Fast Ethernet Switch
(-10~ 60 degrees C operating temperature)
4-Port 10/100 BASE-TX + 2- Port 100BASE-FX Industrial Fast Ethernet Switch w/Wide Operating Temperature
(-40~75 degrees C)
5-Port 10/100BASE-TX Industrial Fast Ethernet Switch w/Wide Operating Temperature
(-40~75 degrees C)
Mounting Kit
87.80
Dimensions ( unit = mm )
ISW-801Tv2
PLANET reserves the right to change specications without prior notice. All brand names and trademarks are property of
their respective owners. Copyright © 2016 PLANET Technology Corp. All rights reserved.
4
Loading...