Planet ISW-514PTF operation manual

5-Port 10/100Mbps with 4-Port PoE

Industrial Fast Ethernet Switch

ISW-504PT / ISW-514PT / ISW-514PT15 / ISW-514PTF

User's Manual

Trademarks

Contents subject revision without prior notice

PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners.

Disclaimer

PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and makes no warranty and representation, either implied or expressed, with respect to

the quality, performance, merchantability, or tness for a particular

purpose.

PLANET has made every effort to ensure that this User’s Manual is accurate; PLANET disclaims liability for any inaccuracies or omissions that may have occurred.

Information in this User’s Manual is subject to change without notice and does not represent a commitment on the part of PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in this User’s Manual. PLANET makes no commitment to update or keep current the information in this User’s Manual, and reserves the right to make improvements to this User’s Manual and/or to the products described in this User’s Manual, at any time without notice.

If you nd information in this manual that is incorrect, misleading, or

incomplete, we would appreciate your comments and suggestions.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the Instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

CE Mark Warning

This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

WEEE Warning

To avoid the potential effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment, end users of electrical

and electronic equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately.

Revision

PLANET 5-Port 10/100Mbps with 4-Port PoE Industrial Fast Ethernet Switch – Wide Temperature User’s Manual

For ModelS: ISW-504PT / ISW-514PT / ISW-514PT15 / ISW-514PTF

Revision: 1.0 (July, 2010)

Part No: EM-ISW-5XXPT Series_v1.0 (2350-AH0230-000)

Table of Contents

1. Introduction .............................................................................. 5

1.1 Package Contents ............................................................... 5

1.2 How to Use This Manual ...................................................... 5

1.3 Product Features ................................................................. 6

2. Installation ..............................................................................

2.1 Product Description ............................................................11

2.1.1 Switch Front Panel ....................................................

2.1.2 LED Indicators ..........................................................12

2.1.3 Switch Upper Panel ...................................................

2.1.4 Wiring the Power Inputs ............................................14

2.1.5 Wiring the Fault Alarm Contact ...................................15

2.2 Mounting Installation ..........................................................15

2.2.1 Install DIN-Rail Mounting ...........................................16

3. Application ...............................................................................

3.1 Installation Steps ...............................................................19

4. Switch Operation ......................................................................

4.1 Address Table .....................................................................20

4.2 Learning ............................................................................20

4.3 Forwarding & Filtering .........................................................20

4.4 Store-and-Forward ..............................................................21

4.5 Auto-Negotiation ................................................................21

5. Troubleshooting ........................................................................

APPENDIX A: Networking Connection ...............................................23

A.1 Switch’s RJ-45 Pin Assignments ...........................................23

A.2 RJ-45 cable Pin Assignments ...............................................23

1. Introduction

1.1 Package Contents

Check the contents of your package for following parts:

● Industrial Fast Ethernet Switch x 1

● User's Manual x 1

● DIN Rail Kit x 1

● Wall Mount Kit x 1

If any of these are missing or damaged, please contact your dealer immediately, if possible, retain the carton including the original packing material, and use them against to repack the product in case there is a need to return it to us for repair.

1.2 How to Use This Manual

This Industrial Fast Ethernet Switch User Manual is structured as follows:

Chapter 2 Installation

The chapter explains the feature, functionality and the physical installation of the Industrial Fast Ethernet Switch.

Chapter 3 Application

The chapter explains the Industrial Fast Ethernet Switch application.

Chapter 4 Switch operation

The chapter explains the Industrial Fast Ethernet Switch transmit operation.

Chapter 5 Troubleshooting

The chapter explains the troubleshooting of the Industrial Fast Ethernet Switch.

Appendix A

This chapter contains cable information of the Industrial Fast Ethernet Switch.

1.3 Product Features

Physical Port

Model Name

ISW-504PT

ISW-514PT

ISW-514PT15 Single-Mode SC 15km

ISW-514PTF

100Base-TX

Ports Fiber Optical Interface

Copper Optical Mode Connector Distance

5 x 10 /

4 x 10 /

NA NA NA NA

Multi-Mode SC 2km

1 x

100Base-FX

Optional SFP

Module

Depend on

SFP Module

IEEE 802.3af PoE

® Comply with IEEE 802.3af Power over Ethernet End-Span PSE

® Up to 4 IEEE 802.3af devices powered

® Support PoE Power up to 15.4 Watts for each PoE port

® Auto detect powered device (PD)

® Circuit protection prevent power interference between ports

® Remote power feeding up to 100m

Layer 2 Features

® Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX /

100Base-FX Ethernet standard

® Supports Auto-Negotiation, 10/100Mbps Half / Full Duplex and

Auto MDI/MDI-X

® High performance Store and Forward architecture, Runt/CRC

ltering eliminates erroneous packets to optimize the network

bandwidth

® Prevents packet loss with Back Pressure (Half-Duplex) and IEEE

802.3x PAUSE Frame Flow Control (Full-Duplex)

® Backplane (Switching Fabric): 1Gbps

® Automatic address learning and address aging

® Integrated address look-up engine, support 2K absolute MAC

addresses

® CSMA/CD Protocol

Industrial Case / Installation

® IP-30 Aluminum Metal case / Protection

® DIN Rail and Wall Mount Design

® Redundant Power Design: 24 or 48V DC, redundant power with

polarity reverse protect function

® Supports EFT protection 6000V DC for power line

® Supports 6000V DC Ethernet ESD protection

® -40 to 75°C operating temperature

1.4 Product Specications

Model ISW-504PT ISW-514PT

Hardware Specication

10/100Base-TX Ports 5 4

100Base-FX interface N/A 1

IEEE 802.3af PoE ports 4 4

Dimensions (W x D x H) 135mm x 87.8mm x 56mm

Weight 842g

Power Requirement 24 or 48V DC

Installation DIN Rail Kit and Wall Mount Ear

Power over Ethernet

PoE Standard IEEE 802.3af Power over Ethernet / PSE

PoE Power Supply Type End-Span

PoE Power Output 48V DC Per Port, 350mA. Max. 15.4 Watts

Power Pin Assignment 1/2(+), 3/6(-)

Switch Specication

Switch Processing Scheme Store-and-Forward

Address Table 2K entries

Flow Control

Switch fabric 1Gbps

Throughput (Packet per second)

Back Pressure for Half Duplex

IEEE 802.3x Pause Frame for Full Duplex

0.74Mpps

1. 10/100Base-TX: Cat. 3, 4, 5, 5e, 6 UTP cable (100meters max.)

2. EIA/TIA-568

Network cables

Standards Conformance

Standards Compliance

Temperature

Humidity

Regulation Compliance FCC Part 15 Class A, CE

Stability testing

100-ohm STP (100meters max.)

IEEE 802.3 Ethernet

IEEE 802.3u Fast Ethernet

IEEE 802.3x Full-Duplex Flow Control

IEEE 802.3af Power over Ethernet

Operating: -40 to 75 Degree C

Storage: -40 to 85 Degree C

Operating: 5~90%

Storage: 5~90% (Non-condensing)

IEC60068-2-32 (Free Fall)

IEC60068-2-27 (Shock)

IEC60068-2-6 (Vibration)

1. 10/100Base-TX: Cat. 3, 4, 5, 5e, 6 UTP cable (100meters max.)

2. EIA/TIA-568 100-ohm STP (100meters max.)

3. Multi-mode optic

ber 62.5/125μm, 50/125μm (2km

max.)

+ 16 hidden pages