Planet ISW-514PTF User Manual

Download

Page 1

ISW-514PTxx

4-Port 10/100Mbps with PoE + 1-Port 100FX Industrial Ethernet Switch with Wide Temperature Range

Physical Port

PLANET ISW-514PT PoE Industrial Ethernet Switch series is designed to transmit

power and data over single Ethernet cable to remote PoE capable devices and operates

reliably in heavy industrial demanding environments. The ISW-514PT series provides

four 10/100Mbps copper ports supporting IEEE 802.3af Power over Ethernet injector

and one 100Base-FX fiber optic interface delivered in an IP30 rugged strong case.

Supporting up to 15.4-watt power per port for any remote IEEE 802.3af powered device

(PD) such as PoE IP cameras and PoE wireless LAN access point, the ISW-514PT

series is an ideal solution to deploying surveillance system and wireless service in

climatically demanding wide temperature range (-40 to 75 degrees C) environments. The

100Base-FX fiber optic uplink port provides long distance, high speed and stable data

transmission to remote core network.

ISW-514PT

• 4-port 10/100Base-TX RJ-45 with IEEE 802.3af PoE injector

• 1-port 100Base-FX multi-mode SC interface - 2km

ISW-514PT15

• 4-port 10/100Base-TX RJ-45 with IEEE 802.3af PoE injector

• 1-port 100Base-FX single mode SC interface - 15km

ISW-514PTF

• 4-port 10/100Base-TX RJ-45 with IEEE 802.3af PoE injector

• 1-port 100Base-FX SFP interface

：

IEEE 802.3af PoE

• Complies with IEEE 802.3af Power over Ethernet End-Span

PSE

• Up to 4 IEEE 802.3af devices powered

• Supports PoE Power up to 15.4 watts for each PoE port

• Auto detects powered device (PD)

• Circuit protection prevents power interference between ports

• Remote power feeding up to 100m

Layer 2 Features

IEEE 802.3af Power over Ethernet PSE Industrial Switch

PoE feature is more often supported in the industrial Ethernet devices for efficient

operation in harsh environments. The ISW-514PT series in-line power follows

standard IEEE 802.3af and allows to supply power to 4 PoE compliant devices at

the distance up to 100 meters through the 4-pair Cat 5 / 5e UTP wire. With Data

and Power over Ethernet from one unit, the ISW-514PT series can reduce cables

deployment and eliminates the need for dedicated electrical outlets on the wall, ceiling

or any unreachable place. A wire that carries both data and power results in lowering

the installation costs, simplifying the installation effort and eliminating the need for

electricians or extension cords. Furthermore, there is only 24V DC input in some

industrial environments. The ISW-514PT series supports 24V DC or 48V DC dual

voltages input and is able to provide more wide-ranging industrial IEEE 802.3af PoE

applications.

• Supports auto-negotiation and 10/100Mbps half / full duplex

and auto MDI/MDI-X

• High performance Store and Forward architecture, runt / CRC

lteringeliminates erroneous packets to optimizethenetwork

bandwidth

• Prevents packet loss with back pressure (half-duplex) and

IEEE802.3x pause frame ow control(full-duplex)

• Automatic address learning and address aging

Industrial Case / Installation

• IP30 aluminum metal case protection

• DIN rail and wall mount design

• 24 or 48V DC, redundant power with polarity reverse protect

function

• Supports EFT 6000V DC protection for power line

• Supports Ethernet ESD 6000V DC protection

• -40 to 75 degrees C operating temperature

Data Sheet

Page 2

ISW-514PTxx

Fiber Optic Link Capability for Flexible Distance Extension

The ISW-514PT series is equipped with one 100Base-FX port that provides more flexibility for Transportation, Manufacturing, Security and Surveillance on

distance extension without any limitation. The ISW-514PT series offers high performance switch architecture as shown below:

ISW-514PT: comes with 4 10/100Mbps UTP ports and 1 100FX (SC interface within 2km)

ISW-514PT15: comes with 4 10/100Mbps UTP ports and 1 100FX (SC interface within 15km)

ISW-514PTF: comes with 4 10/100Mbps UTP ports and 1 100FX (LC interface within optional of Single / Multi-Mode SFP module)

Fiber optic uplink capability makes the ISW-514PT series a suitable model for long distance network deployment. Users can choose the suitable model for

network deployment if required

Wide-Temperature Makes Installation Suitable for Harsh Environments

The ISW-514PT series provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant

floors or in curbside traffic control cabinets. Being able to operate under wide temperature range from -40 to 75 degrees C, the ISW-514PT series can be

placedin almost any difcult environment. Italsooffers dual-redundant, reversible polarity 24VDCor48V DC power inputs forhighavailabilityapplications

requiring dual backup power inputs.

Robust Switch performance

The ISW-514PT series provides non-blocking switch fabric wire-speed throughput as high as 1Gbps and the 2K MAC Address table. It also performs wire-

speed packets transfer without risk of packet loss and the Flow Control function is default enabled to provide fast and reliable data transfer. All of the RJ-45

copper interfaces support 10/100Mbps auto-negotiation for optimal speed detection through RJ-45 Category 3, 4, 5, 5e or 6 cable. The standard auto-MDI/

MDI-X support can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.

Applications

Industrial Area Department / Workgroup PoE Switch

Providing up to 4 PoE, in-line power interface, the ISW-514PT / ISW-514PT15 / ISW-514PTF can easily build a power centrally-controlled IP phone system,

IP camera system, or wireless AP group for industrial network. For instance, 4 cameras or wireless access points can be easily installed around the corner in

the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation, the ISW-514PT series makes the

installationof IP cameras orWLANAPeasierand more efcient.

PoE

PoE IP Cam

PoE

PoE IP Phone

ISW-514PTF

Steel Factory (1)

PoE

Fiber

Control Center

PoE

ISW-514PTF

100100

100

Fiber

ISW-514PT

PoE

PoE IP Cam

PoE Wireless AP

Warehouse

PoE

PoE IP Phone

PoE IP Cam

Steel Factory (2)

100

PoE

100BASE-FX Fiber-optic

100BASE-TX UTP

100BASE-TX UTP with PoE

Page 3

ISW-514PTxx

PoE IP Cam

Core Network

100

PoE

(Redundant Power)

48V DC

PWR 2

400 Watts UPS

ISW-514PT

PoE VoIP ATA

PoE

PoE IP Phone

PoE

PoE Wireless AP

Power Line (DC)

100Base-TX UTP

PoE

100Base-TX UTP with PoE

100

100Base-FX Fiber-optic

2.4GHz 802.11n

Specications

ISW-514PT / ISW-514PT15 / ISW-514PTF

HardwareSpecications

10/100 Bas e-TX Ports

100Base -F X Por t 1

Fiber Por t Type

Connector Type

Maximum Distance

Optical Frequency

Launch Power (dBm)

Receive Sensitivity (dBm)

IEEE 802.3af PoE ports 4

Dimensions (D x W x H) 135 x 87.8 x 56 mm

Weight 842g

Power LED

Power Requirements 24 or 48 VDC, redundant power with polarity reverse protection function

Installation DIN rail kit and wall mount ear

Alarm

Power over Ethernet

PoE Standard

PoE Power Supply Type End-Span

PoE Power Output Per Port 4 8V DC, 350mA . max. 15.4 watts

Power Pin Assignment

SwitchSpecications

Switch Processing Scheme Store-and-Forward

ISW-514PT: Multi- Mode ISW-514PT15: Single M ode ISW-514PTF: Vary on SFP

ISW-514PT: SC ISW-514PT15: SC ISW-514PTF: LC

ISW-514PT: 2km ISW-514P T15: 15km ISW-514PTF: Vary on SFP

ISW-514PT: 1300nm ISW-514PT15: 1310nm ISW-514PTF: Vary on SFP

ISW-514PT: Max.: -14 Min.: -20 ISW-514PT15: Max.: 0 Min.: -20 ISW-514PTF: Vary on SFP

ISW-514PT: -32 ISW-514PT15: -32 ISW-514PTF: Vary on SFP

Power1, Power2 and Fault Port 1~4: PoE In-Use, LNK /ACT Port 5: LNK/ACT

Provides one relay output for power failure Alarm relay current carry ability: 1A @ DC 24V

IEEE 802.3af Power over Ethernet / PSE

1/2(+), 3/6(-)

24/48V DC

PWR1

Page 4

ISW-514PTxx

Address Table

Flow Control

2K entries

Back pressure for half duplex IEEE 802.3x pause frame for full duplex

Switch Fabric 1Gbps

Throughput (packet per second) 0.74Mpps

10/100 Bas e-TX:

Network cables

Cat. 3, 4, 5, 5e and 6 UTP cable (100meters max.) EIA/ TIA-56 8 100- ohm STP (100meters, max.)

Standards Conformance

IEEE 802.3 Ethernet

Standards Compliance

IEEE 802.3u Fast Ethernet IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet

Regulation Compliance FCC Par t 15 Class A, CE

IEC60 068 -2-32 (Free Fall)

Stability Testing

IEC60068-2-27 (Shock) IEC60068-2-6 (Vibration)

Environment

Temperature

Humidity

Operating: -40~75 degrees C Storage: -40 ~85 degrees C

Operating: 5~90% Storage: 5~90% (non-condensing)

Diagram:

ISW-514PT / ISW-514PTS15

Mounting Kit

Bottom View Front View

ISW-514PT / ISW-514PTS15

Bottom View Front View

LNK/

LNK/ ACT

ACT

LNK/ACT

LNK/ACT PoE In-Use

PoE In-Use

LNK/

LNK/ ACT

ACT

LNK/

LNK/ ACT

ACT

PoE

In-Use

Mini-GBIC

LNK/ACT

LNK/ACT PoE In-Use

PoE In-Use

LNK/

ACT

LNK/

ACT

PoE

In-Use

P1 P2 FAULT

RESET

Side View

P1 P2 FAULT

RESET

ISW-514PS

ISW-514PT

ISW-514PSF

ISW-514PTF

Top View Rear View

DIN-Rail Kit

Mounting Kit

Dimensions ( unit = mm )

Mounting Kit

Top View Rear View

DIN-Rail Kit

Mounting Kit

Dimensions ( unit = mm )

Page 5

ISW-514PTxx

Ordering Information

ISW- 514 PT

ISW- 514 PT15 4-Port 10/100 Mbps with PoE +1-Por t 100FX(SM, SC) Industrial Ethernet Switch - 15km (- 40~75 degrees C)

ISW-514PTF 4 -Port 10/100Mbps with PoE +1-Port 100FX(SFP) Industr ial Ether net Switch - (-40~75 degrees C)

ISW-5 04PT 5-Port 10/100Mbps with 4- Port PoE Industrial Ethernet Switch (-40~75 degrees C)

ISW-5 04PS 5-Por t 10/100Mbps with 4 -PoE Industrial Web Smar t Switch (-10~60 degrees C)

ISW- 514 PS 4-Port 10/100 Mbps with PoE +1-Por t 100FX(MM, SC) Industrial Web Smar t Switch - 2km (-10~6 0 degrees C)

ISW- 514 PS15 4-Port 10/100Mbps with PoE +1-Port 100FX(SM, SC) Industrial Web Smar t Switch - 15km (-10~60 degrees C)

ISW- 514 PS F 4-Port 10/100 Mbps with PoE +1-Por t 100FX(SFP) Industrial Web Smart Switch (-10~60 degrees C)

4-Port 10/100 Mbps with PoE +1-Por t 100FX(MM, SC) Industrial Ethernet Switch - 2km (-40~75 degrees C)

Accessories

MFB-T FX

MFB-T F2 0 SFP-Por t 100Base- FX Transceiver (1310nm) - 20km (-40 ~75 degrees C)

SFP-Port 100Base-FX Transceiver (1310nm) -2km (-40~75 degrees C)