CONFIDENTIAL
Filename:PS-IPOE-E302_v1.0.doc
Page 1 of 11
Printed on 1/17/2020
Product Specification of IPOE-E302
. The contents of this
Product Specifications
1-Port 802.3bt PoE++ to 2-Port 802.3af /at Gigabit PoE Extender
IPOE-E302
Version 1.0
This document contains confidential proprietary information and is property of PLANET
document should not be disclosed to unauthorized persons without the written consent of PLANET.
Change History:
Revision Date Author Change List
Version 1.0 2019/12/05 Angeline Initial release
Author Angeline Editor:
Reviewed by: Kent Kang Approved by: Kent Kang
Filename:PS-IPOE-E302_v1.0.doc
Page 2 of 11
Printed on 1/17/2020
Product Specification of IPOE-E302
Confidential
1. PRODUCT DESCRIPTION
Outdoor 802.3bt P oE++ Solution for Breaki ng RJ45 100m Limitation
PLANET IPOE-E302 is an industrial IP67-rated 1-port 802.3bt PoE++ to 2-port 802.3at Gigabit PoE
Extender designed especially for point to multipoint PoE application. The IPOE-E302 can obtain a maximum
of 95-watt PoE power from 802.3bt PoE++ or PoH (Power over HDBASE-T) input port and supplies a
maximum of 65-watt PoE power budget for 2 PoE output ports, extending both the Gigabit Ethernet Data
and 802.3at Power over Ethernet over the UTP cable. The IPOE-E302 provides a simple solution for adding
PoE ports without running more cabling and achieves more flexible network applications without requiring an
external power adapter.
Weather-pro of RJ45 Et h ernet Conne ct or and Shielded Plug
The IPOE-E302 is ideal for installing an extended range of outdoor PoE devices such as outdoor PoE
wireless access points, outdoor PoE IP cameras, outdoor PoE IP intercoms and much more. The IPOE-E302
is equipped with 3-port 10/100/1000BASE-T auto-negotiation RJ45 connectors and 3 waterproof cable glands
for direct-attach applications. Assembled with waterproof cable gland, it can make the general RJ45
connector weather-proof and provides tight and strong connection, and ensures it comes with the industrial
protection rating of IP67 capable of withstanding humidity, dirt, dust, shock, vibrations, heat and cold.
Environmentally-hardened Design
With industrial-level IP67-rated aluminum case, the IPOE-E302 provides a high level of immunity against
electromagnetic interference, and is able to protect itself from dust and water ingress and to operate under the
temperature range from -40 to 75 degrees C. All these features ensure the highest level of reliability for
mission-critical applications in any difficult environment.
Filename:PS-IPOE-E302_v1.0.doc
Page 3 of 11
Printed on 1/17/2020
Product Specification of IPOE-E302
Confidential
Plug and Play, and Easy Cabling Installation
The IPOE-E302 is quite easy to be installed by simply Plug and Play. It is used between a power source
equipment (PSE) and a powered device (PD).
The IPOE-E302 is designed in a compact box containing three RJ45 ports, of which one "PoE+++ Inn" port
functions as PD input and the other two "PoE++ Outut" ports on the other side function as PSE output. The
"PoE OUT" port is also the power injector that transmits DC voltage over the Cat5/5e/6 cable and transfers
data and power simultaneously to a remote PD without affecting the data transmission performance. It offers
a cost-effective and quick solution to double the standard range of PoE from 100 to 200 meters.
Filename:PS-IPOE-E302_v1.0.doc
Page 4 of 11
Printed on 1/17/2020
Product Specification of IPOE-E302
Confidential
2. PRODUCT FEATURES
Physical Port
3-port 10/100/1000BASE-T Gigabit RJ45 interface
− 1-port data + power input
− 2-port data + power output
Power over Ethernet
1-port data + power input
− Complies with IEEE 802.3bt PoE++ Type 4 standard PD
− Compatible with PoH (Power over HDBASE-T) protocol
− Backward compatible with IEEE 802.3at PoE+ end-span or mid-span PD
− Supports PoE input power up to 95 watts
2-port data + power output
− Complies with IEEE 802.3at Power over Ethernet end-span PSE
− Up to 2 IEEE 802.3af/802.3at PoE devices powered
− Supports total PoE budget up to 65 watts for 2 PoE output ports
− Auto detects powered device (PD)
Extends the range of PoE to an additional 100 meters (328ft.)
Forwards both Ethernet data and PoE power to remote device
Layer 2 Features
Hardware-based 10/100Mbps, half / full duplex and 1000Mbps full duplex mode, flow control,
auto-negotiation and auto MDI/MDI-X
Features Store-and-Forward mode with wire-speed filtering and forwarding rates
IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
Integrates address look-up engine, supporting 2K absolute MAC addresses
9K jumbo frame support in 1000Mbps duplex mode
Automatic address learning and address aging
Industrial Case and Installation
IP67-rated aluminum case
Wall-mount design
Supports 6KV DC Ethernet ESD protection
-40 to 75 degrees C operating temperature
No external power cable required for installation
Plug and Play installation
Filename:PS-IPOE-E302_v1.0.doc
Page 5 of 11
Printed on 1/17/2020
Product Specification of IPOE-E302
DC”
Switch Architecture
Switch Fabric
Switch Throughput
Surge Protection
LED Display
Power over Ethernet
Confidential
3. PRODUCT SPECIFICATIONS
3.1 MAIN COMPONENTS
Switch ASIC:
PD Chipset:
PSE Chipset:
MediaTek MD7530D x 1
Ti TPS2373-4 x 1
Ti TPS23861 x 1
3.2 FUNCTION SPECIFICATIONS
Model IPOE-E302
Hardware Specifications
PoE in Port
1 x 10/100/1000BASE-T Ethernet with 802.3bt PoE++ “Data + DC” in,
Network Connector
MAC Address Table 2K MAC address table with auto learning function
Data Buffer 1Mbit
auto MDI/MDI-X, auto-negotiation RJ45 connector
PoE out Port
2 x 10/100/1000BASE-T Ethernet with IEEE 802.3af/at PoE “Data +
out, auto MDI/MDI-X, auto-negotiation RJ45 connector
Store-and-Forward switch architecture
6Gbps
4.46Mpps @ 64Bytes
Flow Control
Jumbo Frame 9Kbytes
ESD Protection
Enclosure IP67-rated and IK10 aluminum metal case
Installation Wall-mount ear
Dimensions (W x D x H)
Weight
Power Consumption 97 watts/331.6BTU (Full loading with PoE function)
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Air 8KV DC
Contact 6KV DC
6KV
Link/ACT LED x 3
150 x 43.8 x 72.94 mm (W x D x H)
169.85 x 43.8 x 72.94 mm (W x D x H), with cable gland
339g
372g (with three waterproof cable glands)
PoE Standard
PoE in Port
− IEEE 802.3bt PoE++ Type 4 standard PD
Filename:PS-IPOE-E302_v1.0.doc
Page 6 of 11
Printed on 1/17/2020
Product Specification of IPOE-E302
Compliance
Confidential
− PoH (Power over HDBASE-T)
− IEEE 802.3at PoE+ end-span/mid-span PD
Per PoE out Port
IEEE 802.3at PoE+ mid-span PSE
PoE in Port
50~57V DC, max. 95 watts
PoE Power
Power Pin Assignment
PoE Power Budget
44~50V DC, max. 30 watts
Per PoE out Port
48~56V DC, max. 30 watts
PoE in Port
1/2(-), 3/6(+), 4/5(+), 7/8(-) or 1/2(+), 3/6(-), 4/5(+), 7/8(-)
Per PoE out Port
4/5(+), 7/8(-)
60 watts (max.) @ 802.3bt PoE++ input
65 watts (max.) @ PoH input
30 watts (max.) @ IEEE 802.3at PoE+ input
No support @ IEEE 802.3af PoE input
Standards Conformance
Regulatory
Stability Testing
Standards Compliance
Environment
Operating
Storage
FCC Part 15 Class A
CE
IEC 60068-2-32 (Free fall)
IEC 60068-2-27 (Shock)
IEC 60068-2-6 (Vibration)
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3bt Power over Ethernet Plus Plus
Temperature: -40 ~ 75 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Temperature: -40 ~ 85 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Filename:PS-IPOE-E302_v1.0.doc
Page 7 of 11
Printed on 1/17/2020
Product Specification of IPOE-E302
Confidential
3.3 PHYSICAL SPECIFICATIONS:
Dimensions:
150 x 43.8 x 72.94 mm (W x D x H)
169.85 x 43.8 x 72.94 mm (W x D x H), with cable gland
Weight:
339g
372g(with three waterproof cable glands)
Diagram:
Filename:PS-IPOE-E302_v1.0.doc
Page 8 of 11
Printed on 1/17/2020
Product Specification of IPOE-E302
Confidential
Diagram: IPOE-E302 with waterpfoof cable glands
Top View:
Filename:PS-IPOE-E302_v1.0.doc
Page 9 of 11
Printed on 1/17/2020
Product Specification of IPOE-E302
LED
Color
Function
Blink to indicate that the IPOE-E302 is actively sending or receiving
data over that port.
LED
Color
Function
Blink to indicate that the IPOE-E302 is actively sending or receiving
data over that port.
Confidential
LED Definition:
PoE Input Port
Light to indicate the port is linked up.
LNK/ACT Green
Per PoE Output Port
Light to indicate the port is linked up.
LNK/ACT Green
PoE++ In Port:
1 x IEEE 802.3bt PoE++ PD RJ45 port
PoE+ Out Port:
2 x IEEE 802.3at PoE+ PSE RJ45 ports
Filename:PS-IPOE-E302_v1.0.doc
Page 10 of 11
Printed on 1/17/2020
Product Specification of IPOE-E302
System on (No loading)
Ethernet full loading
Ethernet + Power full
loading
802.3bt PoE++ Type 4
PSE (55VDC)
Confidential
3.4 ENVIRONMENTAL SPECIFICATIONS
Operating:
Temperature: -40°C ~75 degrees C
Relative Humidity: 5% ~ 95% (non-condensing)
Storage:
Temperature: -40°C ~85 degrees C
Relative Humidity: 5% ~ 95% (non-condensing)
3.5 ELECTRICAL SPECIFICATIONS
1.2 watts 1.8 watts 69.8 watts
3.6 REGULATORY COMPLIANCE
FCC Part 15 Class A
CE
Stability Testing:
• IEC60068-2-32 (Free Fall)
• IEC60068-2-27 (Shock)
• IEC60068-2-6 (Vibration)
3.7 RELIABILITY
MTBF > 100,000Hrs @ 25 degrees C
Filename:PS-IPOE-E302_v1.0.doc
Page 11 of 11
Printed on 1/17/2020
Product Specification of IPOE-E302
Confidential
3.8 BASIC PACKAGING
Industrial Power over Ethernet Extender x 1
User’s Manual x 1
Waterproof Cable Gland x 3
3.9 P ACKING INFORMATION
Box Dimensions (W x D x H):
Gross Weight:
Carton Dimensions (W x D x H):
Total Weight:
Quantity:
240 x 186 x 84 mm
0.59 kg
450 x 264 x 390 mm
6.7 kg
10pcs per carton
Loading...