Planet IPM-ESB User Manual

Environmental Sensor Box

Connecting with Switched IP Power Manager (IPM)

The ESB (Environmental Sensor Box) is a monitoring device that allows you to remotely

monitor the temperature, humidity. PLANET Switched IP Power Manager (IPM) is

equipped with a console port for connecting to an environmental sensor box (ESB).

Temperature and humidity sensors may be added to control the power switch by

monitoring the environmental changes. When the temperature and humidity reach the

customizable minimum/maximum thresholds set, you will be notied via SMS and e-mail.

IPM-ESB

• Measurement range: 0 – 40°C (temperature); 0 – 95% RH

(humidity)

• Measurement accuracy: +/- 0.1°C (temperature); +/- 2% RH

(humidity)

• Off-line monitor

• Naming support for ESB port

• Connect to Switched IPM over RJ11 cable

• User selectable alarm thresholds allow you to dene

acceptable temperature or humidity limits

• Comprehensive environmental management and exible

conguration via Web browser

• Automatic events notication via E-mail and SNMP trap

• Regularly records ESB parameters for statistic analysis and

event diagnostics

• Quick and easy installation (hot-swappable)

Switched IPM

ESB

SMS

Applications

Remote Management via Network

PLANET Switched IP Power Manager consolidates power control, current monitoring, temperature and humidity monitoring with environmental sensor box

(IPM-ESB), web page management, message, e-mail, and SNMP functions together to enable MIS staff to be informed and thereby to remotely deal with the

relevant problems through Internet.

Internet

Power Line (AC)

100BASE-TX UTP

Telephone wire

Switched IPM

AC AC

8 Power Outlets

IPM-ESB

PCWeb Management

Server

Specications

IPM-ESB

Product

Hardware Specications

Sensor Port 1 x RJ11 type, 6P

LED 1 x Power/Status LED

Housing Plastic

Dimensions (W x D x H) 57 x 47.5 x 26.5 mm

Weight 43g

Cable Length 1.4 meters

Measurement

Range

Accuracy

Response Time 2 seconds

Environments

Operating Temperature 0 ~ 40 degrees C Operating Humidity 0 ~ 95%

IPM-ESB

Temperature: 0 - 40°C

Humidit y: 0– 95% RH

Temperature: +/- 0.1°C Humidit y: +/- 2 % RH

Ordering Information

IPM- ESB Environmental Sensor Box