Pioneer VSXD-711 Service manual

N∫m-Û˘,,∫

INPUT
SELECTOR

MULTIJOG

STANDBY

STANDBY/ON

OFF

ON

PHONES

ENTER

MASTERVOLUME

DOWN

UP

R

AUDIO/VIDEO MULTI-CHANNEL RECEIVER

VSX-D711-K

VSX-D711-S

THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).

Model Type Power Requirement Remarks

VSX-D711-K MVXJI AC230V
VSX-D711-K MYXJIEW AC220-230V
VSX-D711-K MYXJIGR AC220-230V
VSX-D711-S MYXJIEW AC220-230V

ORDER NO.

RRV2607

For details, refer to "Important symbols for good services" on page 3.

PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan

PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936

PIONEER CORPORATION 2002

T – ZZV APR. 2002 Printed in Japan

VSX-D711-K, VSX-D711-S

SAFETY INFORMATION

This service manual is intended for qualified service technicians; it is not meant for the casual
do-it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have been
trained to properly and safely repair complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may
void the warranty . If you are not qualified to perform the repair of this product properly and safely, you
should not risk trying to do so and refer the repair to a qualified service technician.

WARNING
This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of California to
cause cancer, birth defects or other reproductive harm.
Health & Safety Code Section 25249.6 – Proposition 65

NOTICE
(FOR CANADIAN MODEL ONLY)
Fuse symbols (fast operating fuse) and/or (slow operating fuse) on PCB indicate that replacement
parts must be of identical designation.

REMARQUE
(POUR MODÈLE CANADIEN SEULEMENT)
Les symboles de fusible (fusible de type rapide) et/ou (fusible de type lent) sur CCI indiquent que
les pièces de remplacement doivent avoir la même désignation.

(FOR USA MODEL ONLY)

1. SAFETY PRECAUTIONS

The following check should be performed for the
continued protection of the customer and service
technician.

LEAKAGE CURRENT CHECK

Measure leakage current to a known earth ground
(water pipe, conduit, etc.) by connecting a leakage
current tester such as Simpson Model 229-2 or
equivalent between the earth ground and all exposed
metal parts of the appliance (input/output terminals,
screwheads, metal overlays, control shaft, etc.). Plug
the AC line cord of the appliance directly into a 120V
AC 60 Hz outlet and turn the AC power switch on. Any
current measured must not exceed 0.5 mA.

Reading should
not be above

0.5 mA

Earth
ground

Device
under
test

Also test with
plug reversed
(Using AC adapter
plug as required)

Test all
exposed metal
surfaces

AC Leakage Test

Leakage
current
tester

ANY MEASUREMENTS NOT WITHIN THE
LIMITS OUTLINED ABOVE ARE INDICATIVE
OF A POTENTIAL SHOCK HAZARD AND
MUST BE CORRECTED BEFORE RETURN­ING THE APPLIANCE TO THE CUSTOMER.

2. PRODUCT SAFETY NOTICE

Many electrical and mechanical parts in the appliance
have special safety related characteristics. These are
often not evident from visual inspection nor the
protection afforded by them necessarily can be obtained
by using replacement components rated for voltage,
wattage, etc. Replacement parts which have these
special safety characteristics are identified in this
Service Manual.

Electrical components having such features are
identified by marking with a
on the parts list in this Service Manual.
The use of a substitute replacement component which
does not have the same safety characteristics as the
PIONEER recommended replacement one, shown in the
parts list in this Service Manual, may create shock, fire,
or other hazards.

Product Safety is continuously under review and new
instructions are issued from time to time. For the latest
information, always consult the current PIONEER
Service Manual. A subscription to, or additional copies
of, PIONEER Service Manual may be obtained at a
nominal charge from PIONEER.

on the schematics and

2

VSX-D711-K, VSX-D711-S

[ Important symbols for good services ]

In this manual, the symbols shown-below indicate that adjustments, settings or cleaning should be made securely.
When you find the procedures bearing any of the symbols, be sure to fulfill them:

1. Product safety

You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and
should keep the safety during servicing by following the safety instructions described in this manual.

2. Adjustments

To keep the original performances of the product, optimum adjustments or specification confirmation is indispensable.
In accordance with the procedures or instructions described in this manual, adjustments should be performed.

3. Cleaning

For optical pickups, tape-deck heads, lenses and mirrors used in projection monitors, and other parts requiring cleaning,
proper cleaning should be performed to restore their performances.

4. Shipping mode and shipping screws

To protect the product from damages or failures that may be caused during transit, the shipping mode should be set or
the shipping screws should be installed before shipping out in accordance with this manual, if necessary.

5. Lubricants, glues, and replacement parts

Appropriately applying grease or glue can maintain the product performances. But improper lubrication or applying
glue may lead to failures or troubles in the product. By following the instructions in this manual, be sure to apply the
prescribed grease or glue to proper portions by the appropriate amount.For replacement parts or tools, the prescribed
ones should be used.

3

VSX-D711-K, VSX-D711-S

CONTENTS

SAFETY INFORMATION

1. SPECIFICATIONS

2. EXPLODED VIEWS AND PARTS LIST

2.1 PACKING

2.2 EXTERIOR

2.3 FRONT PANEL

3. BLOCKDIAGRAM AND SCHEMATIC DIAGRAM

3.1 BLOCK DIAGRAM

3.2 OVERALL WIRING CONNECTION DIAGRAM

3.3 DD & INPUT ASSY(1/4)

3.4 DD & INPUT ASSY(2/4)

3.5 DD & INPUT ASSY(3/4)

3.6 DD & INPUT ASSY(4/4)

3.7

3.8 AMP & PRIMARY(2/2), REGULATOR, HASHIGETA
B TO B , AMP INPUT and TRANS 1 ASSYS

3.9 DIGITAL IN ASSY

3.10 KAWA ASSY

3.11 VIDEO and 6CH IN ASSYS

3.12 S. VIDEO ASSY

3.13 FRONT, R. ENCODER and POWER SW ASSYS

3.14 FRONT VIDEO and H.P. ASSYS

3.15 TRANS4 and MECHA SW ASSYS

3.16 FM/AM TUNER MODULE

4. PCB CONNECTION DIAGRAM

4.1 TRANS1, TRANS2, TRANS3 and TRANS4 ASSYS

4.2 DD & INPUT ASSY

4.3

4.4 REGULATOR, HASHIGETA and KAWA ASSYS

4.5

4.6

4.7

4.8

5. PCB PARTS LIST

6. ADJUSTMENT

7. GENERAL INFORMATION

7.1 DIAGNOSIS

7.1.1

7.1.2

7.1.3

7.2.2

7.2 PARTS

7.2.1

7.2.2

7.3 CLEANING

8. PANEL FACILITIES

AMP & PRIMARY(1/2), TRANS2 and TRANS3 ASSYS

AMP & PRIMARY, AMP INPUT and MECHA SW ASSYS

B TO B, DIGITAL IN, VIDEO and 6CH IN ASSYS
S. VIDEO and FRONT VIDEO ASSYS
FRONT, POWER SW, H.P. and R. ENCODER ASSYS
FM/AM TUNER MODULE

................................................................................

.............................................................................

U-COM BLOCKDIAGRAM
POWER ON AND OFF SEQUENCE
PROTECTION CIRCUIT
PCB LOCATION

..................................................................................

...........................................................................................

IC
DISPLAY

...................................................................

.........................................................................

.........................................

.............................................................................

.....................................................................

..........................

................................................................

...................

.......................................................

.......................................................

.......................................................

.......................................................

................

.................................................................

.......................................................................

................................................

..................................................................

.......................................

.....................................

..................................................

...................................................

...............................................................

.................

......................

.......................................

...........................................................

........................................................................

.........................................................

..........................................................................

....................................................

....................................

.......................................................

...................................................................

...............................................................................

...........................................................................

.....................................................................

.............

.............

............

.........

.............

2
5
6
6

8
10
12
12
14
16
18
20
22
24

26
28
29
30
31
32
34
35
36
38
39
40
44
46
48
50
52
56
57
63
64
64
64
65
67
68
69
69
77
78
79

4

1. SPECIFICATIONS

Amplifier Section

Continuous Power Output (STEREO mode)

Front..................... 100 W per channel (DIN 1kHz, THD 1.0 %, 8 Ω)

Continuous Power Output

Front............................ 100 W per channel (1kHz, THD 1.0 %, 8 Ω)

Center ............................................. 100 W (1kHz, THD 1.0 %, 8 Ω)

Surround ..................... 100 W per channel (1kHz, THD 1.0 %, 8 Ω)

• Above specifications are applicable when the power supply is
230V.

Input (Sensitivity/Impedance)
CD, VCR/DVR, CD-R/TAPE/MD, DVD/LD, TV/SAT ... 200 mV/47 kΩ

Frequency Response
CD, VCR/DVR, CD-R/TAPE/MD, DVD/LD,

TV/SAT ......................................................5 Hz to 100,000 Hz dB

Output (Level/Impedance)

VCR/DVR REC, CD-R/TAPE/MD REC .................... 200 mV/2.2 kΩ

Tone Control

BASS ...................................................................... ± 6 dB (100 Hz)

TREBLE .................................................................. ± 6 dB (10 kHz)

LOUDNESS .................................... +9 dB/+9 dB (100 Hz/10 kHz)

Signal-to-Noise Ratio [DIN (Continuous rated power output/50 mW)]

CD, VCR/DVR, CD-R/TAPE/MD ,D VD/LD, TV/SA T ..................96 dB

Video Section

Input (Sensitivity/Impedance)

VCR/DVR, DVD/LD, TV/SAT ......................................... 1 Vp-p/75 Ω

Output (Level/Impedance)

VCR/DVR ...................................................................... 1 Vp-p/75 Ω

Frequency Response

VCR/DVR, DVD/LD,TV/SAT ] MONITOR........ 5 Hz to 7 MHz dB

Signal-to-Noise Ratio ..............................................................55 dB

VSX-D711-K, VSX-D711-S

FM Tuner Section

Frequency Range.......................................... 87.5 MHz to 108 MHz

Usable Sensitivity......................Mono:13.2 dBf, IHF (1.3 µV/ 75 Ω)

50 dB Quieting Sensitivity .........................................Mono: 20.2 dB

Signal-to-Noise Ratio ................................ Mono: 73 dB (at 85 dBf)

Signal-to-Noise Ratio (DIN) ......................................... Mono: 62 dB

Distortion ........................................................ Stereo: 0.5 % (1 kHz)

Alternate Channel Selectivity ................................. 60 dB (400 kHz)

Stereo Separation ...................................................... 40 dB (1 kHz)

Frequency Response ................................. 30 Hz to 15 kHz (±1 dB)

Antenna Input (DIN) .............................................. 75 Ω unbalanced

+0
– 3

AM Tuner Section

Frequency Range...........................................531 kHz to 1,602 kHz

Sensitivity (IHF, Loop antenna) .........................................350 µV/m

Selectivity ................................................................................ 25 dB

Signal-to-Noise Ratio .............................................................. 50 dB

Antenna...................................................................... Loop antenna

Stereo: 70 dB (at 85 dBf)

Miscellaneous

Power Requirements

UK model .......................................................... AC 230 V, 50/60 Hz

European model......................................... AC 220-230 V, 50/60 Hz

Power Consumption

VSX-D711 ..........................................................................250W

In Standby............................................................................. 1 W

Dimensions ...................................420 (W) x 158 (H) x 401 (D) mm

Weight (without package)
Furnished Parts

AM loop antenna ............................................................................ 1

+0
– 3

FM wire antenna ............................................................................ 1

Dry cell batteries (AA size IEC R6P).............................................. 2

Remote control............................................................................... 1

Operating instructions .................................................................... 1

.........................................................10 kg

Stereo: 38.6 dBf

Stereo: 58 dB

Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and the double D symbol are
trademarks of Dolby Laboratorories.

"DTS" ,"DTS-ES Extended Surround" and "Neo:6" are
trademarks of Digital Theater Systems, Inc.

Accessories

AM loop antenna
(ATB7009)

FM wire antenna
(ADH7005)

Specifications and the design are subject to possible modifications
without notice, due to improvements.

AA size IEC R6P
Dry cell batteries (x2)

Remote control unit
(XXD3042)

5

VSX-D711-K, VSX-D711-S

2. EXPLODED VIEWS AND PARTS LIST

NOTES:

Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
Screws adjacent to mark on product are used for disassembly.
For the applying amount of lubricants or glue, follow the instructions in this manual.
(In the case of no amount instructions, apply as you think it appropriate.)

2.1 PACKING

1

3

2

4

5

MYXJIEW Type Only

6

7

12

10

8

9

11

13

14

6

(1) PACKING PARTS LIST

Mark No. Description Part No.

VSX-D711-K, VSX-D711-S

NSP 2 Warranty Card ARY7022
NSP 4 Dry Cell Batteries(AA/R6P) VEM-013

NSP 10 Polyethylene Bag Z21-038

1 FM Wire Antenna ADH7005
3 AM Loop Antenna ATB7009
5 Operating Instructions XRE3059

(English/German)

6 Operating Instructions See Contrast table (2)

(French/Italian)

7 Operating Instructions See Contrast table (2)

(Dutch/Spanish)
8 Remote Control XXD3042
9 Battery Cover XZA3002

11 Packing Sheet AHG7069
12 Left Pad R5 XHA3032
13 Right Pad R5 XHA3033
14 Packing Case See Contrast table (2)

(2) CONTRAST TABLE

VSX-D711-K/MVXJI, /MYXJIEW, /MYXJIGR and VSX-D711-S/MYXJIEW are constructed the same except for
the following:

Part No.

Mark

No.

Symbol and Description

VSX-D711-K VSX-D711-K VSX-D711-K VSX-D711-S

/MVXJI /MYXJIEW /MYXJIGR /MYXJIEW

Remarks

6 Operating Instructions(French/Italian) Not used XRC3060 Not used XRC3060
7 Operating Instructions(Dutch/Spanish) Not used XRC3071 Not used XRC3071

14 Packing Case XHD3206 XHD3206 XHD3206 XHD3294

7

VSX-D711-K, VSX-D711-S

2.2 EXTERIOR

56

53

2

B

50

53

H

4

O

17

12

T

O

35

19

53

J

53

H

54

M

K
L

D

I

16

D

M

L

K

G

20

54

G

J

41

I

52

50

53

53

58

53

H

5

C

55

55

Accessory of
Front Panel

53

51

53

30

53

53

53

VSX-D711-S
/MYXJIEW Only

60

23

24

53

40

9

56

I

J

C

59

53

47

53

46

49

48

N

31

27

7

G

10

N

53

L

15

53

53

E

34

53

53

53

53

53

53

53

53

N

1

A

M

8

39(1/2)

43

53

28

F

25

53

A

C

39(2/2)

18

V

E

F

K

3

13

E

44

53

29

D

26

B

6

F

37

A

36

53

38

53

53

45

53

Refer to
"2.3 FRONT PANEL SECTION".

8

53

B

38

53

53

57

53

42

NON-CONTACT

SIDE

CONTACT

SIDE

53

(1) EXTERIOR PARTS LIST

VSX-D711-K, VSX-D711-S

Mark No. Description Part No.

1 D.D & INPUT ASSY XWX3047
2 AMP&PRIMARY ASSY XWZ3537
3 REGULATOR ASSY XWZ3545
4 AMP INPUT ASSY XWZ3550
5 TRANS2 ASSY XWZ3558

6 HASHIGETA ASSY XWZ3567
7 BOARD TO BOARD ASSY XWZ3575
8 6CH IN ASSY XWZ3507
9 DIGITAL IN ASSY XWZ3518

10 S. VIDEO ASSY XWZ3522
11 • • • • •

12 TRANS4 ASSY XWZ3526
13 KAWA ASSY XWZ3529
14 • • • • •
15 VIDEO ASSY XWZ3584

NSP 16 TRANS1 ASSY XWZ3553
NSP 17 TRANS3 ASSY XWZ3561

18 FM/AM TUNER MODULE AXQ7232
19 Power Transformer (T1) XTS3046
20 FU1(T2.5A) REK1026

21 • • • • •

22 • • • • •
23 AC Power Cord See Contrast table (2)

24 Cord Stopper CM-22B

25 28P F•F•C/30V (J31) XDD3097

(DD&INPUT CN102
– FRONT CN402)

26 17P F•F•C/30V (J32) XDD3098

(KAWA CN5001
– FRONT CN401)

27 7P F•F•C/30V (J33) XDD3099

(KAWA CN5004
– VIDEO CN503)

28 13P F•F•C/30V (J34) XDD3100

(KAWA CN5005
– FM/AM TUNER CN201)

29 19P F•F•C/30V (J35) XDD3101

(DD&INPUT CN106
– AMP INPUT CN254)

30 23P F•F•C/30V (J36) XDD3102

(AMP&PRIMARY CN53
– REGULATOR CN801)

Mark No. Description Part No.

31 7P F•F•C/30V (J37) XDD3103

(DD&INPUT CN9101

– DIGITAL IN CN1901)
32 • • • • •
33 • • • • •
34 9P F•F•C/30V (J48) XDD3106

(DD&INPUT CN104

– 6CH IN CN307)
35 3P F•F•C/30V (J22) XDD3107

(AMP INPUT CN251

– TRANS4 CN891)

36 Fan Motor XXM3002
NSP 37 Under Base 409 ANA7094

38 Insulator PNW2766
39 FFC Cover R5 XMR3047
40 Rear Panel 711/MY XNC3144

41 Bonnet D510 See Contrast table (2)
42 Fan Holder R4 XNG3040
43 Tuner Shield R5 XNG3072
44 PCB Angle R5 XNG3073
45 Reg Support R5 XNG3074

NSP 46 Heat Sink Assy 0.4*40 XNH3023

47 Heat Sink Angle F ANG7251
48 Heat Sink Angle R ANG7252
49 Heat Sink XNH3022
50 Screw 3x23 ABA7043

51 PCB Mold AMR2533

NSP 52 Fuse Card AAX7277

53 Screw BBZ30P080FMC
54 Screw BBZ30P200FMC
55 Screw FBT40P080FZK

56 Screw See Contrast table (2)

NSP 57 Binder Assy XWZ3571
NSP 58 Holder Assy XWZ3574

59 Tuner Sheet MY XEC3031

NSP 60 N Label 711S/MY See Contrast table (2)

(2) CONTRAST TABLE

VSX-D711-K/MVXJI, /MYXJIEW, /MYXJIGR and VSX-D711-S/MYXJIEW are constructed the same except for
the following:

Part No.

Mark

No.

Symbol and Description

VSX-D711-K VSX-D711-K VSX-D711-K VSX-D711-S

/MVXJI /MYXJIEW /MYXJIGR /MYXJIEW

23 AC Power Code VDG1076 VDG1077 VDG1077 VDG1077
41 Bonnet D510 XZN3112 XZN3112 XZN3112 XZN3122
56 Screw (for Bonnet)

NSP 60 N Label 711S/MY Not used Not used Not used XAL3112

FBT40P080FZK FBT40P080FZK FBT40P080FZK FBT40P080FNI

Remarks

9

VSX-D711-K, VSX-D711-S

2.3 FRONT PANEL

34

34

U

14

20

24

7

13

35

34

2

Q

S

3

1

34

O

34

34

34

28

8

34

18

21

19

23

12

27

23

22

29

25

11

34

36

16

36

26

10

34

34

34

34

15

33

31

4

30

33

R

33

32

34

34

6

P

10

(1) FRONT PANEL PARTS LIST

VSX-D711-K, VSX-D711-S

Mark No. Description Part No.

1 FRONT ASSY XWZ3498
2 POWER SW ASSY XWZ3510
3 H.P. ASSY XWZ3513
4 FRONT VIDEO ASSY XWZ3515
5 • • • • •

6 R. ENCODER ASSY XWZ3511
7 MECHA SW ASSY XWZ3514

NSP 8 8P Shielded Cable (J29) XDX3012

9 • • • • •

10 Damper Assy AXA7052
11 Select Knob R5 See Contrast table (2)

12 Volume Knob R5 See Contrast table (2)
13 Power Button R5 See Contrast table (2)
14 Power Button R5M See Contrast table (2)
15 Jog Button R5 See Contrast table (2)

16 Door Button R5 See Contrast table (2)
17 • • • • •
18 D Panel R5 W/MY XAK3320
19 BN Cover 711/MY See Contrast table (2)
20 LED Lens 1.6 XAK3308

Mark No. Description Part No.

21 Pioneer Badge See Contrast table (2)
22 Screw DR 3x8W XBA3010
23 Cushion R4 See Contrast table (2)
24 Front Panel 711 See Contrast table (2)
25 Magnet R5 XMF3002

26 Holder L R5 XMR3046
27 Earth Plate R5 HP XNG3066
28 Earth Plate R5 D XNG3067
29 Magnet Cover R5 XNG3075
30 Door Assy R5 See Contrast table (2)

NSP 31 Door R5 See Contrast table (2)
NSP 32 Door Cover R5 See Contrast table (2)
NSP 33 Screw 2x35 See Contrast table (2)

34 Screw PPZ30P080FMC
35 Screw BBZ30P080FMC

NSP 36 C Ring DIM8.1 XBH3016

(2) CONTRAST TABLE

VSX-D711-K/MVXJI, /MYXJIEW, /MYXJIGR and VSX-D711-S/MYXJIEW are constructed the same except for
the following:

Part No.

Mark

No.

Symbol and Description

VSX-D711-K VSX-D711-K VSX-D711-K VSX-D711-S

/MVXJI /MYXJIEW /MYXJIGR /MYXJIEW

Remarks

11 Select Knob R5 XAB3023 XAB3023 XAB3023 XAB3024
12 Volume Knob R5 XAB3025 XAB3025 XAB3025 XAB3026
13 Power Button R5 XAD3123 XAD3123 XAD3123 XAD3129
14 Power Button R5M XAD3127 XAD3127 XAD3127 XAD3137
15 Jog Button R5 XAD3124 XAD3124 XAD3124 XAD3131

16 Door Button R5 XAD3126 XAD3126 XAD3126 XAD3135
19 BN Cover 711/MY XAK3291 XAK3291 XAK3291 XAK3284
21 Pioneer Badge XAM3006 XAM3006 XAM3006 VAM1129
23 Cushion R4B XED3001 XED3001 XED3001 Not used
23 Cushion R5S Not used Not used Not used XED3003

24 Front Panel 711 XMB3066 XMB3066 XMB3066 XMB3071

30 Door Assy R5 XXG3091 XXG3091 XXG3091 XXG3093
NSP 31 Door R5 XAK3275 XAK3275 XAK3275 XAK3281
NSP 32 Door Cover R5 XAK3276 XAK3276 XAK3276 XAK3283
NSP 33 Screw 2x35 XBA3007 XBA3007 XBA3007 XBA3008

11

VSX-D711-K, VSX-D711-S

3. BLOCKDIAGRAM AND SPECIFICATIONS

3.1 BLOCKDIAGRAM

V

AXQ7232

R

CN201

FRONT

K

7

CN9013CN107

CN101

10

6
5
4
3
2
8

1

9

2
15

15

5

TC9273F-007
(FUNCTION SEL)

7

IC101

IC1901

CN1901

J

10 11

6

12

2

CN9101

IC9508
BS62LV
1024TC-70

(RAM for
AAC)

IC9504
PDN030A
(ROM for
DECODE)

IC104

3

(ADC)

(DIR)

32

10

43

IC9101

1

(CODEC)

(DAC)

11-13

IC9501
CS493292

CRYSTAL
DSP

22

(for DECODE)

IC9502
TC74
VHC574F

IC9503
TC74
VHC574F

(8 16bit)

31

AK4586

39-40

IC9201

30
28
26
27

A

NJM2100M

NJM4558MD
(LPF)

IC9701

21

IC9702

21

IC9703

31

IC9703

57

NJM4558MD
(6dB AMP)

(FL/FR)

(SL/SR)

(SP
config)

(C)

(SW)

IC9601
NJU7313AM

IC9704

21

IC9705

21

3

4

IC102

NJU7312AM

(EXP/DSP)

6

8

7

21

20

5

9

19

R

FRONT

M

CN901

6
8

N

3

5

3

CN354

IC303

IC302

IC302

3

1

CN307

1

7

1

9
5
7

3

9
5
7

3

3

9

5

IC352

IC351

11

(C SEL)

1

CN104

7

1

5

(Y SEL)

11

10

11

1

12

12

14.1/24.1 14.7/27.3 13.8

VSX-D711-K, VSX-D711-S

1551

6

Q1552

S

17

15

IC103

9

11

IC105
UPC4570G2
(PRE AMP)

31

57

IC106

34

57

33

IC107

31

CN601

4

CN106

9

H

85

111

CN702

Q603

Q601

Q653

Q651

Q632

6

IC601

22

RY751

15

FL / FR
(SP–A)

B

RY754

SP–B

IC602

24

IC602

24

RY753

26

RY752

14

R

6

FRONT

6

CN9015CN301

11

36

9

L

5

7
3

1

IC301

(CONPONENT SEL)

Q112

POWER AMP

IC601, IC602

T+12V

B

O

A

A

CN402

IC805

CN101

CN101

5

IC107

Q631

+BVH

-BVH
NECK+B
NECK-B

+BVL

-BVL

FL AC
FL AC

+12V

-12V

D+5V
A+5V

7

14

CN101

Q701
Q702

IC801
IC802
IC803
IC804

E

E

CN302

D701

D702

D801–D804

D721–D724

1

Q303

A

L

MECHA SW ASSY

U

CN101

U+5V

IC51

D51-D54

RY51

T1
POWER
TRANSFORMER

S591

T51

AC IN

B

13

VSX-D711-K, VSX-D711-S

3.2 OVERALL WIRING CONNECTION DIAGRAM

R.ENCODER
ASSY
(XWZ3511)

FRONT
VIDEO ASSY
(XWZ3515)

P

R

FRONT ASSY

O

(XWZ3498)

H

AMP INPUT ASSY
(XWZ3550)

F

HASHIGETA
ASSY
(XWZ3567)

KAWA
ASSY
(XWZ3529)

V

K

D.D &
INPUT
ASSY
(XWX3047)

A

A 1/4,
A 2/4,

A 3/4,
A 4/4

S. VIDEO
ASSY
(XWZ3522)

REGULATOR
ASSY
(XWZ3545)

E

N

VIDEO
ASSY
(XWZ3584)

L

BOARD TO
BOARD
ASSY
(XWZ3575)

G

14

FM/AM TUNER
MODULE
(AXQ7232)

M

6CH IN ASSY
(XWZ3507)

VSX-D711-K, VSX-D711-S

Note : When ordering service parts, be sure to refer to "EXPLODED VIEWS and P AR TS LIST" or "PCB PARTS LIST".

POWER SW ASSY

Q

(XWZ3510)

U

S

H.P. ASSY
(XWZ3513)

MECHA SW ASSY
(XWZ3514)

DT

TRANS4
ASSY
(XWZ3526)

TRANS3
ASSY
(XWZ3561)

J8

B
B 1/2,
B 2/2

AMP&
PRIMARY
ASSY
(XWZ3537)

J7J6

TRANS2
ASSY
(XWZ3558)

TRANS1
ASSY
(XWZ3553)

I

C

J1J2

J4

J5

REK1026
(T2.5A)

J

DIGITAL IN
ASSY
(XWZ3518)

VDG1076 : VSX-D711-K /MVXJI
VDG1077 : VSX-D711-K /MYXJIEW,
/MYXJIGR
VSX-D711-S /MYXJIEW

15

1

VSX-D711-K, VSX-D711-S

3.3 DD & INPUT ASSY(1/4)

A

B

23

A

D.D & INPUT ASSY

1/4

(XWX3047)

A 2/4

4

C

CN901

R

D

CN802

E

16

A 1/4

1234

5

A 4/4

M

678

VSX-D711-K, VSX-D711-S

CN307

: The power supply is shown with the marked box.

A 2/4

A 4/4

A 2/4,4/4

A 4/4

A 2/4,3/4,4/4

A

CN402

O

B

C

A 2/4

A 2/4,3/4

( )

: AUDIO SIGNAL ROUTE

5

6

7

CN1002

F

A 1/4

8

17

D

1

VSX-D711-K, VSX-D711-S

3.4 DD & INPUT ASSY(2/4)

23

4

A

A 1/4

A 1/4

B

CN1901

J

A 1/4

A 4/4

A 3/4

C

A 1/4

A 3/4

D

D.D & INPUT ASSY

2/4

(XWX3047)

18

A

A 2/4

1234

5

678

VSX-D711-K, VSX-D711-S

A

A 1/4

15K

A 1/4

A 1/4

15K

15K

CN254

H

B

15K

1.2K

C

15K

A 1/4

A 1/4

( )

: AUDIO SIGNAL ROUTE

FRONT
SURROUND

GAIN
(dB)

5

14.1 / 24.1

6

SW

14.7 / 27.3

CENTER

13.8

D

7

8

A 2/4

19

1

VSX-D711-K, VSX-D711-S

3.5 DD & INPUT ASSY(3/4)

A

B

23

4

A

D.D & INPUT ASSY

3/4

(XWX3047)

C

A 1/4

D

20

A 3/4

1234

5

678

VSX-D711-K, VSX-D711-S

A

B

A 2/4

A 1/4

C

A 2/4

D

5

6

7

8

A 3/4

21

1

VSX-D711-K, VSX-D711-S

3.6 DD & INPUT ASSY(4/4)

23

4

A

A 2/4

B

A 1/4

A

D.D & INPUT ASSY

4/4

(XWX3047)

A 1/4

C

D

A 1/4

22

A 1/4

A 4/4

1234

5

678

VSX-D711-K, VSX-D711-S

A

A 1/4

B

C

D

5

6

7

8

A 4/4

23

1

23

VSX-D711-K, VSX-D711-S

3.7 AMP & PRIMARY(1/2), TRANS2 and TRANS3 ASSYS

4

B 1/2

A

B

CN253

AMP&PRIMARY ASSY (XWZ3537)

MTZJ8.2A

MTZJ8.2A

H

MTZJ8.2A

C

D

MTZJ8.2A

24

B 2/2

B 1/2

1234

5

678

VSX-D711-K, VSX-D711-S

150K

150K

68K

6.8K

68K

6.8K

3.3k/2W

CAUTION : FOR CONTINUED PROTECTION

AGAINST RISK OF FIRE.
REPLACE ONLY WITH SAME TYPE
NO. 49101.6 FOR IC853 MFD, BY
LITTELFUSE INC.

TRANS3
ASSY

(XWZ3561)

D

POWER
TRANSFORMER

C

TRANS2
ASSY

(XWZ3558)

1551

S

A

B

1SS133

1SS133

0.22YA

0.22YA

0.22YA

0.22YA

0.22YA

0.22YA

1SS133

0.22YA

0.22YA

0.22YA

0.22YA

0.001

(CQMBA)

4700P

(CQMBA)

4700P

(CQMBA)

4700P

(CQMBA)

4700P

(CQMBA)

4700P

(CQMBA)

4700P

(CQMBA)

4700P

0.001

XKE3018

XKE3017

B 2/2

CAUTION : FOR CONTINUED PROTECTION

CAUTION : FOR CONTINUED PROTECTION

CAUTION : FOR CONTINUED PROTECTION

AGAINST RISK OF FIRE.
REPLACE ONLY WITH SAME TYPE
NO. 491.125 FOR IC701 AND IC702
MFD, BY LITTELFUSE INC.

AGAINST RISK OF FIRE.
REPLACE ONLY WITH SAME TYPE
NO. 49101.6 FOR IC851 AND IC852
MFD, BY LITTELFUSE INC.

AGAINST RISK OF FIRE.
REPLACE ONLY WITH SAME TYPE
NO. 491001 FOR IC603 MFD, BY
LITTELFUSE INC.

C

• NOTE FOR FUSE REPLACEMENT

CAUTION -

FOR CONTINUED PROTECTION AGAINST RISK OF FIRE.
REPLACE WITH SAME TYPE AND RATINGS ONLY.

5

6

CAUTION : FOR CONTINUED PROTECTION

7

AGAINST RISK OF FIRE.
REPLACE ONLY WITH SAME TYPE
NO. 491010 FOR IC604, IC605, IC606,
AND IC607 MFD, BY LITTELFUSE INC.

B 1/2

DC

8

25

D