Pioneer SX-360 Service manual
Surround
Front
Center
SPEAKER SYSTEM
S-X360 XTW/UC
S-X360 XTW/EW5
ORDER NO.
RRV3360
This service manual is intended for qualified service technicians; it is not meant for the casual do-ityourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained to
properly and safely repair complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may void the
warranty. If you are not qualified to perform the repair of this product properly and safely, you should not risk
trying to do so and refer the repair to a qualified service technician.
WARNING
This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of California to
cause cancer, birth defects or other reproductive harm.
Health & Safety Code Section 25249.6 – Proposition 65
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2006
T – ZZS FEB. 2006 Printed in Japan
1
N
23
4
1. FOR PRECAUTION OF REASSEMBLY AND DISASSEMBLY
CS Assy ( Front )
A
The grille assy is attached to the cabinet by 4 external screws.
To detach it, unfasten those screws.
The speaker unit, together with the grille assy, is attached to the
cabinet by 4 external screws.
To detach it, first unfasten those screws. Next remove the cabinet. Then remove the cable.
When attaching it, face its terminal downward.
CS Assy ( Surround )
The grille assy is attached to the cabinet by its bosses. To detach it, pry it open by inserting a flat blade screw driver into
B
lower slot.
To attach it, press it to the inner baffle.
The speaker unit is attached to the inner baffle by 4 external
screws.
To detach it, first remove the grille assy. Next unfasten those
screws, and remove the cable.
When attaching it, face its terminal downward.
2. PARTS LIST
OTES:
C
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
CS Assy ( Center )
The grille assy is attached to the cabinet by 8 external screws.
To detach it ,unfasten those screws.
The speaker unit, together with the grille assy, is attached to the
cabinet by 4 external screws.
To detach it, first remove the grille assy. Next remove the cabinet. Then remove the cable.
When attaching it, face its terminal toward the input terminal.
2-1. PACKING
4
D
E
Packing Parts List
Mark No. Description Part No.
NSP 1 CS Assy (Front) SMW1927
NSP 2 CS Assy (Surround) SMW1928
NSP 3 CS Assy (Center) SMW1929
F
Mark No. Description Part No.
5
1
7
2
5
6
8
NSP 4 Accessory Set SEA1711
NSP Bracket Set SEA1680
NSP Screw Set SEA1676
3
for XTW/UC type
NSP Model Label (FL) SAN3794
NSP Model Label (FR) SAN3795
NSP Model Label (SL) SAN3796
NSP Model Label (SR) SAN3797
NSP Model Label (C) SAN3798
for XTW/EW5 type
NSP Model Label (FL) SAN3820
NSP Model Label (FR) SAN3821
NSP Model Label (SL) SAN3822
NSP Model Label (SR) SAN3823
NSP Model Label (C) SAN3824
Speaker Wire (FL: White) SDS1174
Speaker Wire (FR: Red) SDS1175
Speaker Wire (SL: Blue) SDS1176
Speaker Wire (SR: Gray) SDS1177
Speaker Wire (C: Green) SDS1178
Screw BMZ50P120FNC
Polyethylene Bag S0 SHL1314
Mounting Bracket SNN1047
Polyethylene Bag S1 SHL1429
Non Skid Pad (for Subwoofer) SEC1912
Non Skid Pad
Polyethylene Bag S2 SHL1251
5 Protector SHA2509
6 Polyethylene Bag S1 SHL1419
7 Polyethylene Bag S2 SHL1420
8 Packing Case SHG2722
8 Packing Case SHG2723
(for Front, Center)
SEP6002
2
1234
S-X360
Loading...