Pioneer SDV-535 Service manual
Sub Woofer
Front
Center
SPEAKER SYSTEM
S-DV535 XJC/E
S-DV535 XJC/NC
ORDER NO.
RRV3153
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
CS Assy ( Subwoofer )
The cosmetic baffle assy is attached to the cabinet by its bosses.
To detach it, first remove the stand. Next pry it open by inserting a flat blade screw driver into lower slot.
To attach it, press it to the cabinet.
The stand is attached to the cabinet by 6 external screws.
To detach it, unfasten those screws.
The speaker unit is attached to the cabinet by 4 external screws.
To detach it, first remove the stand. Then unfasten those
screws.
When attaching it, face its terminal toward the back board.
The input terminal is attached to the back board by press-fitting.
To detach it, pry it open by inserting a flat blade screwdriver
into the lower side.
When attaching it, the red terminal is right-side.
CS Assy ( Front )
The grille assy is attached to the cabinet by 4 external screws.
To detach it, unfasten those screws.
The speaker unit, together with the grille assy, is attached to the
cabinet by 4 external screws.
To detach it, first unfasten those screws. Next remove the cabinet. Then remove the cable.
When attaching it, face its terminal downward.
CS Assy ( Center )
The grille assy is attached to the cabinet by 8 external screws.
To detach it ,unfasten those screws.
The speaker unit, together with the grille assy, is attached to the
cabinet by 4 external screws.
To detach it, first remove the grille assy. Next remove the cabinet. Then remove the cable.
When attaching it, face its terminal toward the input terminal.
The input terminal is attached to the cabinet by internal screw.
To detach it, first remove the grille assy. Next unfasten this
screw, and remove the cable.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2005
T – ZZK MAY 2005 Printed in Japan
1
N
23
4
PARTS LIST
OTES:
A
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
For Packing
Mark No. Description Part No.
NSP CS Assy (Front) SMW1860
NSP CS Assy (Center) SMW1862
NSP CS Assy (Subwoofer) SMW6156
for XJC/E type
NSP Model Label (FL) SAN3618
NSP Model Label (FR) SAN3619
NSP Model Label (C) SAN3575
B
NSP Model Label (SW) SAN3576
for XJC/NC type
NSP Model Label (FL) SAN3658
NSP Model Label (FR) SAN3659
NSP Model Label (C) SAN3648
NSP Model Label (SW) SAN3649
NSP Accessory Set SEA1686
C
NSP Bracket Set SEA1681
NSP Screw Set SEA1682
Speaker Wire (FL: White) SDS1174
Speaker Wire (FR: Red) SDS1175
Speaker Wire (C: Green) SDS1178
Speaker Wire (SW: Purple) SDS1179
Screw BMZ50P120FNC
Polyethylene Bag S0 SHL1314
CS ASSY (Front)
Mark No. Description Part No.
NSP Cabinet SNK2846
Grille SMG1838
NSP Badge 28 SAM1506
NSP Grille Cloth SAS1588
NSP Baffle SNK2847
Connecting Cord SDD1345
Input Terminal SKX1096
NSP Acoustic Absorbent (White) SMV2194
NSP Acoustic Absorbent (Black) SMV2198
Speaker (Full-Range) K77DU55-52D
Screw (for Input Terminal) BPZ35P080FNI
Screw (for Cabinet) BPZ35P120FNI
D
E
Mounting Bracket SNN1047
Polyethylene Bag S1 SHL1429
Non Skid Pad SEP6002
Polyethylene Bag S1 SHL1251
Top Protector SHA2507
Middle Protector SHA2494
Bottom Protector SHA2495
Polyethylene Bag S1 SHL1419
Polyethylene Bag S2 SHL1420
Non Skid pads SEP1332
Protection Sheet S6 SHC1825
for XJC/E type
Paking Case SHG2645
for XJC/NC type
Paking Case SHG2644
F
2
1234
S-DV535
Loading...