MAN-KEH-P5010R-GB_B.fm Page 1 Friday, October 6, 2000 2:22 PM
Multi-CD control High power cassette player with RDS tuner
2SHUDWLRQ 0DQXDO
.(+ 3 5
.(+ 3 5
.(+ 3 5
.(+ 3 5%
Q |
(1*/,6+ |
|
MAN-KEH-P5010R-GB_B.fm Page 2 Friday, October 6, 2000 2:22 PM
&RQWHQWV |
|
|
,QVWDOODWLRQ |
||
Installation with the rubber bush .................. |
3 |
|
Removing the Unit ....................................... |
3 |
|
&RQQHFWLQJ WKH 8QLWV |
||
.H\ )LQGHU |
||
• |
Head Unit ............................................... |
6 |
• Steering Remote Controller (CD-SR80) .6 |
||
%HIRUH 8VLQJ 7KLV 3URGXFW |
||
About This Product ...................................... |
6 |
|
About This Manual ....................................... |
6 |
|
Precaution .................................................... |
6 |
|
In Case of Trouble ....................................... |
6 |
|
When using the 50-Disc Type |
|
|
Multi-CD Player .......................................... |
6 |
|
%DVLF 2SHUDWLRQ |
||
To Listen to Music ........................................ |
7 |
|
Basic Operation of Tuner ............................. |
7 |
|
• Manual and Seek Tuning |
|
|
• |
Preset Tuning |
|
• |
Band |
|
Basic Operation of Cassette Player ............. |
8 |
|
•Fast Forward/Rewind and Music Search
•Eject
•Cassette Loading Slot
•Direction Change
Basic Operation of Multi-CD Player ............. |
8 |
•Track Search and Fast Forward/Reverse
•Disc Search
•Disc Number Search
(for 6-Disc, 12-Disc types)
7XQHU 2SHUDWLRQ
•Local Seek Tuning
•Best Stations Memory (BSM)
8VLQJ 5'6 )XQFWLRQV |
|
What is RDS? .............................................. |
9 |
Program Service Name Display ................... |
9 |
AF Function ................................................ |
10 |
• Activating/Deactivating the AF Function |
|
PI Seek Function ........................................ |
10 |
•PI Seek
•Auto PI Seek (for preset station)
Regional Function ...................................... |
10 |
• Activating/Deactivating the REG Function |
|
TA Function ................................................ |
11 |
•Activating/Deactivating the TA Function
•Canceling Traffic Announcements
•Adjusting the TA Volume
•TP Alarm Function
PTY Function ............................................. |
12 |
•PTY Search Setting Function
•PTY Search Function
•PTY Alarm
•Canceling Emergency Announcements
8VLQJ WKH &DVVHWWH 3OD\HU
• Repeat Play
• Blank Skip
• Radio Intercept
8VLQJ 0XOWL &' 3OD\HUV
•Repeat Play
•Random Play
•Scan Play
•Pause
$XGLR$GMXVWPHQW
Selecting the Equalizer Curve ................... |
15 |
Entering the Audio Menu ........................... |
15 |
Audio Menu Functions ............................... |
15 |
•Balance Adjustment (FAD)
•Equalizer Curve Adjustment (EQ-L/EQ-M/EQ-H)
•Loudness Adjustment (LOUD)
•Front Image Enhancer Function (FIE)
•Source Level Adjustment (SLA)
'HWDFKLQJ DQG 5HSODFLQJ WKH )URQW 3DQHO
Theft Protection ......................................... |
17 |
•Detaching the Front Panel
•Replacing the Front Panel
,QLWLDO 6HWWLQJ |
|
Entering the Initial Setting Menu ................ |
17 |
Initial Setting Menu Functions .................... |
18 |
•Changing the FM Tuning Step (STEP)
•Switching the Auto PI Seek (A-PI)
•Switching the AUX Mode (AUX)
2WKHU )XQFWLRQV
Using the AUX Source ............................... |
18 |
• Selecting the AUX Source |
|
Cellular Telephone Muting ......................... |
18 |
&DVVHWWH 3OD\HU DQG &DUH |
|
Precaution .................................................. |
19 |
•About the Cassette Player
•About Cassette Tapes
Cleaning the Head ..................................... |
19 |
6SHFLILFDWLRQV
(1*/,6+
MAN-KEH-P5010R-GB_B.fm Page 3 Friday, October 6, 2000 2:22 PM
,QVWDOODWLRQ
1RWH
•Before finally installing the unit, connect the wiring temporarily, making sure it is all connected up properly, and the unit and the system work properly.
•Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
•Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.
•Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop, like an emergency stop.
•If installation angle exceeds 30° from horizontal, the unit might not give its optimum performance.
,QVWDOODWLRQ ZLWK WKH UXEEHU EXVK
|
Holder |
|
After inserting the holder into the dashboard, |
Dashboard |
then select the appropriate tabs according to the |
thickness of the dashboard material and bend |
|
|
them. (Install as firmly as possible using the top |
|
and bottom tabs. To secure, bend the tabs 90 |
|
degrees.) |
Rubber bush
Screw
5HPRYLQJ WKH 8QLW
Insert the supplied extraction keys into the unit, as shown in the figure, until they click into place. Keeping the keys pressed against the sides of the unit, pull the unit out.
(1*/,6+
MAN-KEH-P5010R-GB_B.fm Page 4 Friday, October 6, 2000 2:22 PM
&RQQHFWLQJ WKH 8QLWV
1RWH
•This unit is for vehicles with a 12-volt battery and negative grounding. Before installing it in a recreational vehicle, truck, or bus, check the battery voltage.
•To avoid shorts in the electrical system, be sure to disconnect the - battery cable before beginning installation.
•Refer to the owner’s manual for details on connecting the power amp and other units, then make connections correctly.
•Secure the wiring with cable clamps or adhesive tape. To protect the wiring, wrap adhesive tape around them where they lie against metal parts.
•Route and secure all wiring so it cannot touch any moving parts, such as the gear shift, handbrake, and seat rails. Do not route wiring in places that get hot, such as near the heater outlet. If the insulation of the wiring melts or gets torn, there is a danger of the wiring shortcircuiting to the vehicle body.
•Don’t pass the yellow lead through a hole into the engine compartment to connect to the battery. This will damage the lead insulation and cause a very dangerous short.
•Do not shorten any leads. If you do, the protection circuit may fail to work when it should.
•Never feed power to other equipment by cutting the insulation of the power supply lead of the unit and tapping into the lead. The current capacity of the lead will be exceeded, causing overheating.
•When replacing fuse, be sure to use only fuse of the rating prescribed on this unit.
•Since a unique BPTL circuit is employed, never wire so the speaker leads are directly grounded or the left and right - speaker leads are common.
•Speakers connected to this unit must be high-power types with minimum rating of 45 W (50 W)* and impedance of 4 to 8 ohms. Connecting speakers with output and/or impedance values other than those noted here may result in the speakers catching fire, emitting smoke, or becoming damaged.
*KEH-P5010R
• When this product’s source is switched ON, a control signal is output through the blue/white |
|
lead. Connect to an external power amp’s system remote control or the car’s Auto-antenna |
|
relay control terminal (max. 300 mA 12 V DC). If the car features a glass antenna, connect |
(1*/,6+ |
to the antenna booster power supply terminal. |
|
|
• When an external power amp is being used with this system, be sure not to connect the blue/ white lead to the amp’s power terminal. Likewise, do not connect the blue/white lead to the power terminal of the auto-antenna. Such connection could cause excessive current drain and malfunction.
• To avoid short-circuiting, cover the disconnected lead with insulating tape. Especially, insulate the unused speaker leads without fail. There is a possibility of short-circuiting if the leads are not insulated.
• To prevent incorrect connection, the input side of the IP-BUS connector is blue, and the output side is black. Connect the connectors of the same colors correctly.
• If this unit is installed in a vehicle that does not have an ACC (accessory) position on the ignition switch, the red lead of the unit should be connected to a terminal coupled with ignition switch ON/OFF operations. If this is not done, the vehicle battery may be drained when you are away from the vehicle for several hours.
ACC position |
No ACC position |
•The black lead is ground. Please ground this lead separately from the ground of high-current products such as power amps.
If you ground the products together and the ground becomes detached, there is a risk of damage to the products or fire.
•Cords for this product and those for other products may be different colors even if they have the same function. When connecting this product to another product, refer to the supplied Installation manuals of both products and connect cords that have the same function.
MAN-KEH-P5010R-GB_B.fm Page 5 Friday, October 6, 2000 2:22 PM
&RQQHFWLQJ WKH 8QLWV
This product conforms to new cord colors.
|
Rear output |
This product |
|
|
|
1RWH |
Antenna jack |
|
Depending on the kind of vehicle, the function |
|
|
of 3* and 5* may be different. In this case, be |
|
|
sure to connect 2* to 5* and 4* to 3*. |
|
|
|
IP-BUS input (Blue) |
|
Multi-CD player (sold separately)
A |
A |
Power amp |
(sold separateley) |
Connecting cords with RCA pin plugs (sold separately)
Fuse
Yellow/black
If you use a cellular telephone, connect it via the Audio
Mute lead on the cellular telephone. If not, keep the Audio
Mute lead free of any connections.
IP-BUS cable
B B
|
Connect leads of the |
Blue/white |
System remote control |
Cap (1*) |
|
||
same color to each other. |
To system control terminal of the |
|
|
When not using this terminal, |
|
||
|
power amp (Max. 300 mA 12 V DC). |
|
|
do not remove the cap. |
|
|
|
|
|
|
|
C |
C |
|
Yellow (3*) |
Yellow (2*) |
|
|
Back-up |
To terminal always supplied |
|
|
(or accessory) |
with power regardless of |
|
|
|
ignition switch position. |
|
|
|
|
Rear speaker (Left) |
Rear speaker (Right) |
Red (5*) |
Red (4*) |
|
|
Accessory |
To electric terminal controlled |
|
|
(or back-up) |
by ignition switch (12 V DC) |
|
|
|
ON/OFF. |
|
|
Black (ground)
To vehicle (metal) body.
ISO connector
1RWH
In some vehicles, the ISO connector may be divided into two. In this case, be sure to connect to both connectors.
Speaker leads |
: Front left + |
White |
|
White/black |
: Front left - |
Gray |
: Front right + |
Gray/black |
: Front right - |
Green |
: Rear left + |
Green/black |
: Rear left - |
Violet |
: Rear right + |
Violet/black |
: Rear right - |
D |
D |
Perform these connections when using a |
different amp (sold separately). |
||
|
Blue/white (6*) |
Blue/white (7*) |
|
|
To Auto-antenna relay control terminal (max. 300 mA 12 V DC). |
The pin position of the ISO connector will differ depends on the type of vehicle. Connect 6* and 7* when Pin 5 is an antenna control type. In another type of vehicle, never connect 6* and 7*.
(1*/,6+
MAN-KEH-P5010R-GB_B.fm Page 6 Friday, October 6, 2000 2:22 PM
.H\ )LQGHU
+HDG 8QLW
+/– buttons |
|
LOCAL/BSM button |
EQ button |
Cassette door |
EJECT button |
|
|
AUDIO button |
|
|
BAND button |
|
|
Detach button |
TA button |
Buttons 1 – 6 |
8/2/4/6 buttons |
SOURCE button |
|
|
|
PTY button |
|
|
|
6WHHULQJ 5HPRWH &RQWUROOHU &' 65
The steering remote controller (CD-SR80) is an option only for KEH-P5010R.
ATT button
This lets you quickly lower volume level (by about 90%). Press once more to return to the original volume level.
BAND button 
SOURCE/OFF button
8/2 buttons |
4/6 buttons |
|
|
|
+/– button |
FUNCTION button |
AUDIO button |
Not Used. |
|
%HIRUH 8VLQJ 7KLV 3URGXFW
$ERXW 7KLV 3URGXFW
•This product complies with the EMC Directives (89/336/EEC, 92/31/EEC) and CE Marking Directive (93/68/EEC).
The tuner frequencies on this product are allocated for use in Western Europe, Asia, the Middle East, Africa and Oceania. Use in other areas may result in improper reception. The RDS function operates only in areas with FM stations broadcasting RDS signals.
$ERXW 7KLV 0DQXDO
This product features a number of sophisticated functions ensuring superior reception and operation. All are designed for the easiest possible use, but many are not selfexplanatory. This operation manual is intended to help you benefit fully from their potential and to maximize your listening enjoyment.
We recommend that you familiarize yourself with the functions and their operation by reading through the manual before you begin using this product. It is especially important that you read and observe the “Precaution” on this page and in other sections.
This manual explains head unit operation. You can perform the same operations with the steering remote controller when operating KEH-P5010R.
3UHFDXWLRQ
•The Pioneer CarStereo-Pass is for use only in Germany.
•Keep this manual handy as a reference for operating procedures and precautions.
•Always keep the volume low enough for outside sounds to be audible.
•Protect this product from moisture.
•If the battery is disconnected, the preset memory will be erased and must be reprogrammed.
,Q &DVH RI 7URXEOH
Should this product fail to operate properly, contact your dealer or nearest authorized Pioneer Service Station.
:KHQ XVLQJ WKH 'LVF 7\SH 0XOWL &' 3OD\HU
The available functions of the 50-Disc Type Multi-CD Player are described in this Operation Manual. Note that other 50-Disc Type Multi-CD Player functions cannot be used with this product.
(1*/,6+
Loading...