Pioneer DJM-800 installation Guide
DJM-800 Mixer Mounting Plate Assembly Guide
hole
covers
1
Locate the six (6) hole covers
on sides of the DJM-800.
Note: The hole covers are
textured circular patches. There
are three (3) hole covers on the
left side and 3 hole covers on the
right side.
2
With a flat-head screwdriver,
pop out the hole covers from
both sides of the unit.
3
Position the screws under the
hole
covers
top flap of the rack. Attach
the rack ears using the
screws supplied with the
DJM-800.
For use in correct manner and safety of DJM-8OO, please
thoroughly familiarize yourself with the "Operating Instruction
Manual" of DJM-8OO. Pioneer Electronics (USA) Inc. may not be
liable for imperfect installation and fitting, misuse, modification of
product or for any damage caused by force.
Pioneer Electronics (USA) Inc.
2265 East 220th Street, Long Beach, CA 90810
phone 310-952-2111 fax 310-952-2110
website: www.PioneerProDj.com
Loading...