Pioneer DEH-P5200, DEH-P6200 User Manual 2

Multi-CD control High power CD player with FM/AM tuner

Syntoniseur FM/AM et lecteur de CD, “Puissance élevée”, avec contrôleur pour lecteur de CD à chargeur

Operation Manual

DEH-P6200 DEH-P5200

Mode d’emploi

ENGLISH

FRANÇAIS DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Contents

Dear Customer ............................................ 3

Key Finder .................................................... 4

Head Unit

Remote Controller

Before Using This Product ...................... 5

About This Product .......................................... 5

About This Manual ............................................ 5

Important .......................................................... 5

Precaution .......................................................... 6

After-sales Service for Pioneer Products .......... 6

When using the 50-Disc Type

Multi-CD Player ........................................ 6

Remote Controller and Care .................... 7

Using the Remote Controller ............................ 7

Battery .............................................................. 7

Basic Operation ........................................ 8

To Listen to Music ............................................8

Basic Operation of Tuner ................................ 10

Manual and Seek Tuning

Preset Tuning

Band

Basic Operation of Built-in CD Player .......... 11

Switching the Display

Open

Track Search and Fast Forward/Reverse

Disc Loading Slot

Eject

Basic Operation of Multi-CD Player .............. 13

Track Search and Fast Forward/Reverse

Disc Search

Disc Number Search (for 6-Disc, 12-Disc types)

Corresponding Display Indications and

Buttons .................................................... 14

Entering the Function Menu ............................ 14

Function Menu Functions ................................ 15

Entering the Detailed Setting Menu ................ 16

Detailed Setting Menu Functions .................... 17

Tuner Operation ...................................... 18

Local Seek Tuning (LOCAL)

Best Stations Memory (BSM)

Using the Built-in CD Player .................. 19

Repeat Play (REPEAT)

Random Play (RANDOM)

Scan Play (T-SCAN)

Pause (PAUSE)

Disc Title Input (TITLE IN)

Using Multi-CD Players .......................... 21

Repeat Play (REPEAT)

Random Play (RANDOM)

Scan Play (SCAN)

Pause (PAUSE)

ITS (Instant Track Selection) .......................... 23

ITS Programming (ITS)

ITS Play (ITS-P)

Erase a Track Program

Erase a Disc Program

Disc Title ........................................................ 25

Disc Title Input (TITLE IN)

Selecting Discs by Disc Title List (TITLE LIST)

Displaying Disc Title

Compression and DBE (COMP) .................... 27

COMP/DBE ON/OFF Switching

CD TEXT Function (for CD TEXT

compatible type) ...................................... 28

Title Display Switching

Title Scroll

Audio Adjustment .................................... 29

Selecting the Equalizer Curve ........................ 29

Entering the Audio Menu ................................ 29

Audio Menu Functions .................................... 30

Balance Adjustment (FADER)

Equalizer Curve Adjustment (EQ-LOW/MID/HIGH)

Equalizer Curve Fine Adjustment

Loudness Adjustment (LOUD)

Subwoofer Output (SUB.W)

Subwoofer Setting Adjustment (80HZ 0)

Non Fading Output (NON FAD)

Non Fading Output Level Adjustment (NON FAD)

High Pass Filter (HPF)

Front Image Enhancer Function (FIE)

Source Level Adjustment (SLA)

Detaching and Replacing the

Front Panel .......................................... 36

Theft Protection .............................................. 36

Detaching the Front Panel

Replacing the Front Panel

Warning Tone

Initial Setting ............................................ 37

Entering the Initial Setting Menu .................... 37

Initial Setting Menu Functions ........................ 38

Setting the Time

Setting the Warning Tone (WARN)

Switching the AUX Mode (AUX)

Setting the Dimmer (DIMMER)

Setting the Rear Speaker Lead and Subwoofer Controller (REAR SP)

DFS Alarm Function ................................ 41

Activating the DFS Alarm Feature .................. 41

Setting Entry Delay Time ................................ 41

Activating Internal Speaker ON/OFF ............ 42

Speaker Volume Output Adjustment

Selecting Door Switching Systems ................ 43

Door System Confirmation

Operation of “DFS Alarm” ............................ 44

Arming Alarm ................................................ 44

Disarming Alarm ............................................ 44

Entry Detection .............................................. 44

Other Functions ........................................ 45

Using the PGM Button (PGM-FUNC) ............ 45

Setting the PGM Button

Using the PGM Button

Displaying the Time ........................................ 47

Using the AUX Source .................................... 47

Selecting the AUX Source

AUX Title Input

Cellular Telephone Muting ............................ 48

CD Player and Care .................................. 49

Precaution ........................................................ 49

Built-in CD Player’s Error Message .............. 49

Specifications .......................................... 50

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion—and, most importantly, without affecting your sensitive hearing.

Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.

To establish a safe level:

• Start your volume control at a low setting.

• Slowly increase the sound until you can hear it comfortably and clearly, and without distor-

tion.

Once you have established a comfortable sound level:

• Set the dial and leave it there.

Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all,

we want you listening for a lifetime.

W e W ant You Listening For A Lifetime

Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hearing damage from loud noise is often undetectable until it is too late, this manufacturer and the Electronic Industries Association’s Consumer Electronics Group recommend you avoid pro longed exposure to excessive noise. This list of sound levels is included for your protection.

Decibel Level Example

30 Quiet library, soft whispers 40 Living room, refrigerator, bedroom away from traffic 50 Light traffic, normal conversation, quiet office 60 Air conditioner at 20 feet, sewing machine 70 Vacuum cleaner, hair dryer, noisy restaurant 80 Average city traffic, garbage disposals, alarm clock at two feet.

THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE

90 Subway, motorcycle, truck traffic, lawn mower 100 Garbage truck, chain saw, pneumatic drill 120 Rock band concert in front of speakers, thunderclap 140 Gunshot blast, jet plane 180 Rocket launching pad

Information courtesy of the Deafness Research Foundation.

Key Finder

Head Unit

Remote Controller (for DEH-P6200)

A remote controller that enables remote operation of the head unit is supplied only for DEH-P6200. Operation is the same as when using buttons on the head unit.

+/– button Raise or lower the volume.

AUDIO button

BAND button

FUNCTION button

CD button Press once to select a CD.

ATT button This lets you quickly lower volume level (by about 90%). Press once more to return to the original volume level.

5/∞/2/3 buttons

TUNER button Press once to select a tuner.

PAUSE button Press once to pause play.

FUNCTION button

OPEN button

BAND button

Buttons 1–6

5/∞/2/3 buttons

DISPLAY button

LOUD button

VOLUME

EQ selector

AUDIO button

CLOCK button

PGM button

SOURCE/OFF button

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

About This Product

The tuner frequencies on this product are allocated for use in North America. Use in other areas may result in improper reception.

About This Manual

This product features a number of sophisticated functions ensuring superior reception and operation. All are designed for the easiest possible use, but many are not self-explanatory. This operation manual is intended to help you benefit fully from their potential and to maximize your listening enjoyment. We recommend that you familiarize yourself with the functions and their operation by reading through the manual before you begin using this product. It is especially important that you read and observe the “Precaution” on the next page and in other sections. This manual explains head unit operation. You can perform the same operations with the remote controller only when operating DEH-P6200. The remote controller enables onetouch source changing and pause operation, and offers the convenience of ATT, a function not provided on the head unit.

Important

The serial number of this device is located on the bottom of this product. For your own security and convenience, be sure to record this number on the enclosed warranty card.

Before Using This Product

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Precaution

• Keep this manual handy as a reference for operating procedures and precautions.

• Always keep the volume low enough for outside sounds to be audible.

• Protect the product from moisture.

• If the battery is disconnected, the preset memory will be erased and must be reprogrammed.

After-sales Service for Pioneer Products

Please contact the dealer or distributor from where you purchased the product for its aftersales service (including warranty conditions) or any other information. In case the necessary information is not available, please contact the companies listed below:

Please do not ship your product to the companies at the addresses listed below for repair without advance contact.

For warranty information please see the Limited Warranty sheet included with your product.

When using the 50-Disc Type Multi-CD Player

The available functions of the 50-Disc Type Multi-CD Player are described in this Operation Manual. Note that other 50-Disc Type Multi-CD Player functions cannot be used with this product.

CAUTION: USE OF CONTROL OR ADJUSTMENT OR PERFOR-

MANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS

PRODUCT WILL INCREASE EYE HAZARD.

7 U.S.A.

Pioneer Electronics Service, Inc. CUSTOMER SERVICE DEPARTMENT P.O. Box 1760 Long Beach, CA 90801 800-421-1404

7 CANADA

Pioneer Electronics of Canada, Inc. CUSTOMER SERVICE DEPARTMENT 300 Allstate Parkway Markham, Ontario L3R 0P2 (905) 479-4411 1-877-283-5901

Remote Controller and Care

Using the Remote Controller (for DEH-P6200)

DEH-P6200 is equipped with a remote controller for convenient operation.

• Point the controller in the direction of the front panel to operate.

Precaution:

• Do not store the remote controller in high temperatures or direct sunlight.

• The controller may not function properly in direct sunlight.

• Do not let the remote controller fall onto the floor, where it may become jammed under the brake or accelerator pedal.

Battery (for DEH-P6200)

• Slide the tray out on the back of the remote controller and insert the battery with the (+) and (–) poles pointing in the proper direction.

Replacing the Lithium Battery:

• Use only lithium battery “CR2032”, 3 V.

Precaution:

• Remove the battery if the remote controller is not used for a month or longer.

• If the event of battery leakage, wipe the remote controller completely clean and install a new bat-

tery.

WARNING:

• Keep the Lithium Battery out of reach of children. Should the Battery be swallowed,

immediately consult a doctor.

CAUTION:

• Do not recharge, disassemble, heat or dispose of battery in fire.

• Use a CR2032 (3 V) Lithium Battery only. Never use other types of battery with this

product.

• Do not handle the battery with metallic tools.

• Do not store the Lithium Battery with metallic materials.

• Dispose of the used Lithium Battery, in compliance with applicable laws and regula-

tions.

• Always check carefully that you are loading battery with its (+) and (–) poles facing in

the proper directions.

Basic Operation

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

To Listen to Music

The following explains the initial operations required before you can listen to music.

Note:

• Loading a disc in this product. (Refer to page 11.)

1. Select the desired source. (e.g. Tuner)

7 Head Unit

Each press of the SOURCE/OFF button selects the desired source in the following order: Built-in CD player = TV = Tuner = Multi-CD player = External Unit = AUX

7 Remote Controller (for DEH-P6200)

Each press of the button selects the desired source in the following order: TUNER button : TV = Tuner = OFF CD button : Built-in CD player = Multi-CD player = OFF

Note:

• External Unit refers to a Pioneer product (such as one available in the future) that, although incompatible as a source, enables control of basic functions by this product. Only one External Unit can be controlled by this product.

• In the following cases, the sound source will not change: * When a product corresponding to each source is not connected to this product. * When no disc is set in this product. * When no magazine is set in the Multi-CD player. * When the AUX (external input) is set to OFF. (Refer to page 39.)

• When this product’s blue/white lead is connected to the car’s Auto-antenna relay control terminal, the car’s Auto-antenna extends when this product’s source is switched ON. To retract the antenna, switch the source OFF.

2. Extend the VOLUME forward.

When you press the VOLUME, it extends forward so that it becomes easier to roll. To retract the VOLUME, press it again.

Continued overleaf.

Each press changes the Source ...

Basic Operation

3. Raise or lower the volume.

Rolling the VOLUME changes the volume level.

Note:

• Roll clockwise to raise the volume level.

• Roll counterclockwise to lower the volume level.

4. Turn the source OFF.

Hold for 1 second

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Basic Operation of Tuner

Manual and Seek Tuning

• You can select the tuning method by changing the length of time you press the 2/3 button.

Manual Tuning (step by step) 0.5 seconds or less Seek Tuning 0.5 seconds or more

Note:

• If you continue pressing the button for longer than 0.5 seconds, you can skip

broadcasting stations. Seek Tuning starts as soon as you release the button.

• Stereo indicator “” lights when a stereo station is selected.

Preset Tuning

• You can memorize broadcast stations in buttons 1 through 6 for easy, one-touch station recall.

Preset station recall 2 seconds or less Broadcast station preset memory 2 seconds or more

Note:

• Up to 18 FM stations (6 in F1 (FM1), F2 (FM2) and F3

(FM3)) and 6 AM stations can be stored in memory.

• You can also use the 5 or ∞ buttons to recall broadcast sta-

tions memorized in buttons 1 through 6.

Preset Number Indicator

Band

F1 (FM1) = F2 (FM2) = F3 (FM3) = AM

Band Indicator

Frequency Indicator

Basic Operation

Basic Operation of Built-in CD Player

Track Search and Fast Forward/Reverse

• You can select between Track Search or Fast Forward/Reverse by pressing the 2/3 button for a different length of time.

Track Search 0.5 seconds or less Fast Forward/Reverse Continue pressing

Note:

• If a disc cannot be inserted fully or playback fails, make sure the recorded side is down. Press the

EJECT button and check the disc for damage before reinserting it.

• If a CD is inserted with the recorded side up, it will be ejected automatically after a few moments.

• If the Built-in CD player cannot operate properly, an error message (such as “ERROR-14”) appears

on the display. Refer to “Built-in CD Player’s Error Message” on page 49.

• The Built-in CD player is not equipped with CD TEXT function.

• A CD TEXT disc is a CD featuring recorded text information such as Disc Title, Artist Name and

Track Title.

Play Time Indicator

Track Number Indicator

Switching the Display

Each press of the DISPLAY button changes the display in the following order: Playback mode (Elapsed play time) = Disc Title

Note:

• If you switch displays when disc titles have not been input, “NO TITLE” is displayed.

Open

Note:

• Use to open the front panel when loading or ejecting a CD. (The illustration on the right shows the front panel open.)

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Disc Loading Slot

The Built-in CD player plays one standard 12 cm or 8 cm (single) CD at a time. Do not use an adapter when playing 8 cm CD.

Eject

Note:

• The CD function can be turned ON/OFF with the disc remaining in this product. (Refer to page 8.)

• Discs left partially inserted after ejection may incur damage or fall out.

Basic Operation

Basic Operation of Multi-CD Player

This product can control a Multi-CD player (sold separately).

Track Search and Fast Forward/Reverse

• You can select between Track Search or Fast Forward/Reverse by pressing the 2/3 button for a different length of time.

Track Search 0.5 seconds or less Fast Forward/Reverse Continue pressing

Play Time Indicator

Track Number Indicator Disc Search

Disc Number Indicator

Disc Number Search (for 6-Disc, 12-Disc types)

• You can select discs directly with the 1 to 6 buttons. Just press the number corresponding to the disc you want to listen to.

Note:

• When a 12-Disc Multi-CD Player is connected and you want to select disc 7 to 12, press the

1 to 6 buttons for 2 seconds.

Note:

• The Multi-CD player may perform a preparatory operation, such as verifying the presence of

a disc or reading disc information, when the power is turned ON or a new disc is selected for playback. “READY” is displayed.

• If the Multi-CD player cannot operate properly, an error message such as “ERROR-14” is

displayed. Refer to the Multi-CD player owner’s manual.

• If there are no discs in the Multi-CD player magazine, “NO DISC” is displayed.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Corresponding Display Indications and Buttons

This product’s display features Key Guidance Indicators. These light to indicate which of the 5/∞/2/3, FUNCTION and AUDIO buttons you can use. When you’re in the Function Menu (refer to next section), Detailed Setting Menu (refer to page 16), Initial Setting Menu (refer to page 37) or Audio Menu (refer to page 29), they also make it easy to see which 5/∞/2/3 buttons you can use to switch functions ON/OFF, switch repeat selections and perform other operations. Indicator and corresponding buttons are shown below.

7 Head Unit 7 Remote Controller 7 Display

When 1 is lit in the display, perform appropriate operations with the z buttons. When 2 is lit in the display, it indicates that you are in the Function Menu, Detailed Setting Menu or Initial Setting Menu. You can switch between each of these menus and between different modes in the menus using button x on the head unit or remote controller. When 3 is lit in the display, it indicates you are in the Audio Menu. You can switch between modes in the Audio Menu using button c on the head unit or remote controller.

Entering the Function Menu

The Function Menu lets you operate simple functions for each source.

Note:

• After entering the Function Menu, if you do not perform an operation within about 30 seconds, the Function Menu is automatically canceled.

1. Select the desired mode in the Function Menu. (Refer to next section, “Function Menu Functions”.)

Continued overleaf.

Each press changes the Mode ...

2. Operate a mode. (e.g. Repeat Play)

3. Cancel the Function Menu.

Function Menu Functions

The following chart shows functions for each source in the Function Menu. The chart also shows indications for each function, operations and buttons used to perform operations. For more details, or when you want to know about an operation, refer to the page number indicated in the chart.

7 Tuner

Function name (Display) Button: Operation Page

Best Stations Memory (BSM) 5: ON 18

∞: OFF

Local Seek Tuning (LOCAL) 1 5: ON 18

3 ∞: OFF

2 2 or 3: Select (Sensitivity)

7 Built-in CD Player

Function name (Display) Button: Operation Page

Repeat Play (REPEAT) 5: ON 19

∞: OFF

Random Play (RANDOM) 5: ON 19

∞: OFF

Scan Play (T-SCAN) 5: ON 20

∞: OFF

Pause (PAUSE) 5: ON 20

∞: OFF

The button used and the operation it performs are indicated by the key guidance indicator. Press the 5 button to switch the key guidance indicator ON, and the ∞ button to switch it OFF.

Basic Operation

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

7 Multi-CD Player

Function name (Display) Button: Operation Page

Repeat Play (REPEAT) 2 or 3: Select (Play range) 21 Selecting Discs by Disc Title List 1 2 or 3: Select (Disc Title) 26

(TITLE LIST) 2 5: Play Random Play (RANDOM) 5: ON 21

∞: OFF

Scan Play (SCAN) 5: ON 22

∞: OFF

ITS Play (ITS-P) 5: ON 23

∞: OFF

Pause (PAUSE) 5: ON 22

∞: OFF

Compression and DBE (COMP) 5 or ∞: Select 27

(Sound Quality Function)

Entering the Detailed Setting Menu

In the Detailed Setting Menu, you can operate convenient, complex functions for each source.

1. Enter the Detailed Setting Menu.

2. Select the desired mode. (Refer to next section, “Detailed Setting Menu Functions”.)

3. Operate a mode.

Continued overleaf.

Each press changes the Mode ...

Hold for 2 seconds

4. Cancel the Detailed Setting Menu.

Note:

• You can cancel the Detailed Setting Menu by pressing the FUNCTION button again for 2 seconds.

Detailed Setting Menu Functions

The following chart shows functions for each source in the Detailed Setting Menu. The chart also shows indications for each function, operations and buttons used to perform operations. For more details, or when you want to know about an operation, refer to the page number indicated in the chart.

7 Tuner

Function name (Display) Button: Operation Page

Program Function (PGM-FUNC) 1 2 or 3: Select (Function) 45

2 5: Memory

7 Built-in CD Player

Function name (Display) Button: Operation Page

Disc Title Input (TITLE IN) 1 5 or ∞: Select (Letter) 20

2 2 or 3: Select (Position) 3 3: Memory

Program Function (PGM-FUNC) 1 2 or 3: Select (Function) 45

2 5: Memory

7 Multi-CD Player

Function name (Display) Button: Operation Page

Disc Title Input (TITLE IN) 1 5 or ∞: Select (Letter) 25

2 2 or 3: Select (Position)

3 3: Memory ITS Programming (ITS) 5: Memory 23 Program Function (PGM-FUNC) 1 2 or 3: Select (Function) 45

2 5: Memory

Basic Operation

Tuner Operation

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Local Seek Tuning (LOCAL)

When Local is ON, you can only select broadcast stations providing strong reception.

1. Press the FUNCTION button and select the Local mode (LOCAL) in the Function Menu.

FM : LOCAL 1 Ô LOCAL 2 Ô LOCAL 3 Ô LOCAL 4 AM : LOCAL 1 Ô LOCAL 2

Note:

• The LOCAL 4 setting allows reception of only the strongest stations, while lower settings let you

receive progressively weaker stations.

Best Stations Memory (BSM)

The BSM function stores stations in memory automatically.

1. Press the FUNCTION button and select the BSM mode (BSM) in the Function Menu.

• To cancel the process, press the ∞ button in the Function Menu before memorization is complete.

2. Switch the BSM ON with the 5 button.

The stations with the strongest signals will be stored under buttons 1–6 and in order of their signal strength.

3. Select the desired Local Seek sensitivity with the 2/3 buttons.

“LOC”

2. Switch the Local ON/OFF with the 5/∞ buttons.

Using the Built-in CD Player

Repeat Play (REPEAT)

Repeat Play plays the same track repeatedly.

Note:

• If you perform Track Search or Fast Forward/Reverse, Repeat Play is automatically canceled.

Random Play (RANDOM)

Random Play plays the tracks on a CD in random order for variety.

2. Switch the Random Play ON/OFF with the 5/∞ buttons.

1. Press the FUNCTION button and select the Random mode (RANDOM) in the Function Menu.

“RPT”

2. Switch the Repeat Play ON/OFF with the 5/∞ buttons.

1. Press the FUNCTION button and select the Repeat mode (REPEAT) in the Function Menu.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Scan Play (T-SCAN)

Scan Play plays the first 10 seconds or so of each track on a CD in succession.

Note:

• Scan Play is canceled automatically after all the tracks on a disc have been scanned.

Pause (PAUSE)

Pause pauses the currently playing track.

Disc Title Input (TITLE IN)

You can use “TITLE IN” to input up to 48 disc titles for CDs in the Built-in CD player. (Perform the same operation as (described) on page 25 under “Using Multi-CD Players”.)

Note:

• After the title for 48 discs have been entered, data for a new disc will overwrite the oldest one.

• If you connect a Multi-CD player, you can input disc titles for up to 100 discs.

2. Switch the Pause ON/OFF with the 5/∞ buttons.

1. Press the FUNCTION button and select the Pause mode (PAUSE) in the Function Menu.

3. When you find the desired track, cancel the Scan Play with the ∞ button.

If the Function Menu has been canceled automatically, select the Scan mode in the Function Menu again.

2. Switch the Scan Play ON with the 5 button.

1. Press the FUNCTION button and select the Scan mode (T-SCAN) in the Function Menu.

Using Multi-CD Players

Repeat Play (REPEAT)

There are three repeat play ranges: One-track Repeat, Disc Repeat and Multi-CD player Repeat. Default repeat play range is Multi-CD player Repeat.

1. Press the FUNCTION button and select the Repeat selecting mode (REPEAT) in the Function Menu.

Play range Display Indicator

Multi-CD player Repeat MCD

-One-track Repeat TRK RPT Disc Repeat DSC DISC

Note:

• If you select other discs during the repeat play, the repeat play range changes to Multi-CD player Repeat.

• If you perform Track Search or Fast Forward/Reverse during One-track Repeat, the repeat play range changes to Disc Repeat.

Random Play (RANDOM)

Tracks are played at random within the selected repeat play range as explained in “Repeat Play” above.

1. Press the FUNCTION button and select the Random mode (RANDOM) in the Function Menu.

Display Play range

D-RDM Disc Repeat M-RDM Multi-CD player Repeat

Note:

• One-track Repeat changes to the Disc Repeat when you switch the Random Play ON.

2. Switch the Random Play ON/OFF with the 5/∞ buttons.

After selecting the desired repeat play range from those referred to in “Repeat Play” above, switch MultiCD Player Random Play ON.

“DISC”

2. Select the desired repeat play range with the 2/3 buttons.

Multi-CD player Repeat = Onetrack Repeat = Disc Repeat

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Scan Play (SCAN)

In the Disc Repeat, the beginning of each track on the selected disc is scanned for about 10 seconds. In the Multi-CD player Repeat, the beginning of the first track on each disc is scanned for about 10 seconds.

1. Press the FUNCTION button and select the Scan mode (SCAN) in the Function Menu.

Display Play range

T-SCAN Disc Repeat D-SCAN Multi-CD player Repeat

Note:

• Scan Play is canceled automatically after all the tracks or discs have been scanned.

• One-track Repeat changes to the Disc Repeat when you switch the Scan Play ON.

Pause (PAUSE)

Pause pauses the currently playing track.

1. Press the FUNCTION button and select the Pause mode (PAUSE) in the Function Menu.

2. Switch the Pause ON/OFF with the 5/∞ buttons.

3. When you find the desired track (or disc), cancel the Scan Play with the ∞ button.

If the Function Menu has been canceled automatically, select the Scan mode in the Function Menu again.

2. Switch the Scan Play ON with the

5 button.

After selecting the desired repeat play range from those referred to in “Repeat Play” on page 21, switch Multi-CD Player Scan Play ON.

Using Multi-CD Players

ITS (Instant Track Selection)

The ITS function allows you to search for the track you wish to play when a Multi-CD player is installed. You can use ITS to program automatic playback of up to 24 tracks per disc from up to 100 discs. (You can store ITS program and Disc Title data for up to 100 discs in memory.)

ITS Programming (ITS)

Programmed tracks are played within the selected repeat play range in the “Repeat Play” on page 21.

1. Play the track you wish to program.

2. Select the ITS Programming mode (ITS) in the Detailed Setting Menu. (Refer to page 16.)

Note:

• After 100 discs have been programmed, data for a new disc will overwrite the data for the disc that

has not been played back for the longest time.

ITS Play (ITS-P)

ITS Play of tracks is performed within the play range explained in the “Repeat Play” section.

1. Press the FUNCTION button and select the ITS Play mode (ITS-P) in the Function Menu.

Note:

• If no track in the current range is programmed for ITS Play, “ITS EMPTY” is displayed.

2. Switch the ITS Play ON/OFF with the 5/∞ buttons.

After selecting the desired repeat play range from those referred to in “Repeat Play” on page 21, switch ITS Play ON.

3. Program the desired track with the 5 button.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Erase a Track Program

1. Select the track you wish to erase, during ITS Play.

2. Select the ITS Programming mode (ITS) in the Detailed Setting Menu. (Refer to page 16.)

Erase a Disc Program

1. Select the disc you wish to erase, while the disc is playing.

2. Select the ITS Programming mode (ITS) in the Detailed Setting Menu. (Refer to page 16.)

3. Erase the disc program with the ∞ button.

3. Erase the track program with the ∞ button.

ITS is canceled and playback of the next ITS-programmed track begins. If there are no more programmed tracks in the current range, “ITS EMPTY” is displayed and normal play resumes.

Using Multi-CD Players

Disc Title

Disc Title Input (TITLE IN)

You can input Titles up to 10 letters long for up to 100 discs. Using this function lets you easily search for and select a desired disc for play. (You can store ITS program and Disc Title data for up to 100 discs in memory.)

1. Play the disc you wish to input the disc title.

2. Select the Disc Title Input mode (TITLE IN) in the Detailed Setting Menu. (Refer to page 16.)

Note:

• When playing a CD TEXT disc on a CD TEXT compatible Multi-CD player, you cannot switch to

this mode.

• A CD TEXT disc is a CD featuring recorded text information such as Disc Title, Artist Name and

Track Title.

Note:

• Titles remain in memory, even after the disc has been removed from the magazine, and are recalled

when the disc is reinserted.

• After the titles for 100 discs have been entered, data for a new disc will overwrite the data for the

disc that has not been played back for the longest time.

• You can display the disc title of the disc currently playing. For details, refer to “Displaying Disc

Title” on page 26.

5. When you have completed title input, make the 10th letter flash, then memorize by pressing the 3 button.

4. Move the box left and right with the 2/3 buttons.

3. Select letters, numbers and symbols with the 5/∞ buttons.

To insert a space, select the flashing cursor “_”.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Selecting Discs by Disc Title List (TITLE LIST)

Follow the procedures below to play a disc for which you have input the title in a MultiCD player or a CD TEXT disc on a CD TEXT compatible Multi-CD player.

1. Press the FUNCTION button and select the Disc Title List mode (TITLE LIST) in the Function Menu.

Displaying Disc Title

You can display the currently playing Disc Title.

Note:

• You can also display the currently playing Disc Title when playing a CD TEXT disc on a CD TEXT compatible Multi-CD player. (Refer to page 28.)

Note:

• If you switch displays when disc titles have not been input, “NO TITLE” is displayed.

• Switch the Disc Title Display with the DISPLAY button.

Each press of the DISPLAY button changes the display in the following order: Playback mode (Play Time) = Disc Title

3. Play the selected disc with the 5 button.

2. Select the desired disc title with the 2/3 buttons.

Nothing is displayed for disc whose titles have not been input.

Using Multi-CD Players

Compression and DBE (COMP)

Using the COMP (Compression) and DBE (Dynamic Bass Emphasis) functions enables Multi-CD player sound quality adjustment. Each of the functions enables two-step adjustment.

7 COMP

The COMP (Compression) function adjusts imbalances between loud and subdued sounds at higher volumes.

7 DBE

DBE (Dynamic Bass Emphasis) boosts bass levels to give a fuller sound.

COMP/DBE ON/OFF Switching

1. Press the FUNCTION button and select the COMP/DBE switching mode (COMP) in the Function Menu.

Note:

• You can use these functions with a Multi-CD player that has them. If the player does not feature the

COMP/DBE functions, “NO COMP” is displayed if you try to use them.

2. Select the desired mode with the 5/∞ buttons.

COMP OFF = COMP 1 = COMP 2 = COMP OFF = DBE 1 = DBE 2

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

CD TEXT Function (for CD TEXT compatible type)

You can use these functions when playing a CD TEXT disc on a CD TEXT compatible Multi-CD player.

Title Display Switching

Note:

• If certain text information is not recorded on a CD TEXT disc, “NO ~” (e.g. “NO T-TITLE”) is displayed.

Title Scroll

This product displays the first 10 letters only of Disc Title, Artist Name and Track Title. With text longer than 10 letters, you can see the rest of the text by scrolling.

• Scroll the title display by pressing the DISPLAY button for 2 seconds.

• Select the desired title display with the DISPLAY button.

Each press of the DISPLAY button changes the display in the following order: Playback mode (Play Time)

= Disc Title = Disc Artist Name = Track Title = Track Artist Name

Selecting the Equalizer Curve

You can switch between Equalizer curves.

• Rotate the EQ selector up or down to select the desired Equalizer curve.

POWERFUL Ô NATURAL Ô VOCAL Ô CUSTOM Ô EQ FLAT Ô SUPER BASS

Note:

• “CUSTOM” stores an equalizer curve you have made adjustments to. (Refer to “Equalizer Curve Adjustment” on page 30 and “Equalizer Curve Fine Adjustment” on page 31.)

• You can create different “CUSTOM” curves for different sources. (The Built-in CD player and Multi-CD player are set to the same Equalizer Curve Adjustment setting automatically.)

Entering the Audio Menu

With this menu, you can adjust the sound quality.

Note:

• After entering the Audio Menu, if you do not perform an operation within about 30 seconds, the Audio Menu is automatically canceled.

• Audio Menu functions change depending on the Rear Speaker Lead and Subwoofer Controller setting in the Initial Setting Menu. (Refer to “Setting the Rear Speaker Lead and Subwoofer Controller” on page 40.)

1. Select the desired mode in the Audio Menu.

2. Operate a mode.

3. Cancel the Audio Menu.

Each press changes the Mode ...

Equalizer curve

Audio Adjustment

+ 74 hidden pages