Pioneer DEH-P3950MP User Manual

Operation Manual

CD Receiver

DEH-P3950MP

Black plate (1,1)

English

Español

Português (B)

<YRD5079-A/U>1

Black plate (2,1)

Contents

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this man-

ual in a safe place for future reference.

Before You Start

About this unit 4 Visit our website 4 About WMA 4 About MP3 4 Use and care of the remote control 4

– Installing the battery 4 – Using the remote control 5

Protecting your unit from theft 5

– Removing the front panel 5 – Attaching the front panel 5

Basic Operations

What’s What 6

– Head unit 6 – Remote control 6

Turning the unit on and selecting a

source 7 Adjusting the volume 7 Turning the unit off 7

Tuner

Listening to the radio 8 Introduction of advanced tuner operation 8 Storing and recalling broadcast

frequencies 8 Storing the strongest broadcast

frequencies 9 Tuning in strong signals 9

Built-in Player

Playing a disc 10 Introduction of advanced built-in CD player

operation 10 Repeating play 11 Playing tracks in random order 11 Scanning tracks or folders 11 Pausing disc playback 11 Using compression and BMX 12

Searching every 10 tracks in the current disc

or folder 12

Displaying text information on disc 12

Multi-CD Player

Playing a CD 13 Introduction of advanced multi-CD player

operation 13 Repeating play 13 Playing tracks in random order 14 Scanning CDs and tracks 14 Pausing CD playback 14 Using compression and bass emphasis 14 Using ITS playlists 15

– Creating a playlist with ITS

programming 15

– Playback from your ITS playlist 15 – Erasing a track from your ITS

playlist 15

– Erasing a CD from your ITS playlist 16

Using CD TEXT functions 16

Audio Adjustments

Introduction of audio adjustments 17 Using balance adjustment 17 Using the equalizer 17

– Recalling equalizer curves 18 – Adjusting equalizer curves 18 – Fine-adjusting equalizer curve 18

Adjusting loudness 19 Using subwoofer output 19

– Adjusting subwoofer settings 19 Using the high pass filter 19 Boosting the bass 20 Front image enhancer (F.I.E.) 20 Adjusting source levels 20

Other Functions

Adjusting initial settings 21 Setting the clock 21

<YRD5079-A/U>2

Contents

Setting the FM tuning step 21 Setting the AM tuning step 21 Switching the auxiliary setting 22 Setting the rear output and subwoofer

controller 22 Turning the clock display on or off 22 Using the AUX source 22

– About AUX connection method 23 – Selecting AUX as the source 23

Introduction of iPod® operation 23

– iPod operation 23 – Displaying text information on

iPod 23

Black plate (3,1)

English

Additional Information

Understanding built-in CD player error

messages 24 Handling guideline of discs and player 24 Dual Discs 25 WMA, MP3 and WAV files 25

– Example of a hierarchy 25 – Compressed audio compatibility 25

Specifications 27

<YRD5079-A/U>3

Section

Black plate (4,1)

Before You Start

About this unit

CAUTION

! Do not allow this unit to come into contact

with liquids. Electrical shock could result. Also, this unit damage, smoke, and overheat could result from contact with liquids.

! Keep this manual handy as a reference for op-

erating procedures and precautions.

! Always keep the volume low enough so that

you can hear sounds from outside the vehicle.

! Protect this unit from moisture. ! If the battery is disconnected or discharged,

the preset memory will be erased and must be reprogrammed.

! If this unit does not operate properly, contact

your dealer or nearest authorized Pioneer Service Station.

Visit our website

Visit us at the following site:

! We offer the latest information about Pio-

neer Corporation on our website.

About WMA

Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

Note

This unit may not operate correctly depending on the application used to encode WMA files.

About MP3

Supply of this product only conveys a license for private, non-commercial use and does not convey a license nor imply any right to use this product in any commercial (i.e. revenuegenerating) real time broadcasting (terrestrial, satellite, cable and/or any other media), broadcasting/streaming via internet, intranets and/ or other networks or in other electronic content distribution systems, such as pay-audio or audio-on-demand applications. An independent license for such use is required. For details, please visit http://www.mp3licensing.com.

Use and care of the remote control

Installing the battery

Slide the tray out on the back of the remote control and insert the battery with the plus (+) and minus (–) poles pointing in the proper direction.

The Windows Media™ logo printed on the box indicates that this unit can play back WMA data. WMA is short for Windows Media™ Audio and refers to an audio compression technology that is developed by Microsoft Corporation. WMA data can be encoded by using Windows Media Player version 7 or later.

<YRD5079-A/U>4

Before You Start

WARNING

Keep the battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor.

CAUTION

! Use only one CR2025 (3 V) lithium battery. ! Remove the battery if the remote control is not

used for a month or longer.

! Danger of explosion if battery is incorrectly re-

placed. Replace only with the same or equivalent type.

! Do not handle the battery with metallic tools. ! Do not store the battery with metallic materi-

als.

! In the event of battery leakage, wipe the re-

mote control completely clean and install a new battery.

! When disposing of used batteries, please

comply with governmental regulations or environmental public institutions’ rules that apply in your country/area.

Using the remote control

Point the remote control in the direction of the front panel to operate.

Important

! Do not store the remote control in high tem-

peratures or direct sunlight.

! The remote control may not function properly

in direct sunlight.

! Do not let the remote control fall onto the

floor, where it may become jammed under the brake or accelerator pedal.

Black plate (5,1)

Section

English

Important

! Handle gently when removing or attaching

the front panel.

! Avoid subjecting the front panel to excessive

shocks.

! Keep the front panel out of direct sunlight and

high temperatures.

Removing the front panel

1 Press DETACH to release the front panel.

2 Grab the front panel and remove.

3 Put the front panel into provided protective case for safe keeping.

Attaching the front panel

1 Slide the front panel to the left until it clicks.

Front panel and the head unit are jointed on the left side. Make sure that the front panel has been jointed to the head unit.

2 Press the right side of the front panel until it is firmly seated.

# If you can’t attach the front panel to the head unit successfully, try again. Front panel may be damaged if you attach the front panel forcedly.

Protecting your unit from theft

The front panel can be detached to deter theft.

<YRD5079-A/U>5

243

75a

cde

Section

Black plate (6,1)

Basic Operations

What’s What

Head unit

1 AUDIO button

Press to select various sound quality controls.

2 EQ button

Press to select various equalizer curves.

3 SOURCE button, VOLUME

This unit is turned on by selecting a source. Press to cycle through all the available sources. Rotate it to increase or decrease the volume.

4 Disc loading slot

Insert a disc to play.

5 EJECT button

Press to eject a CD from your built-in CD player.

6 CLOCK button

Press to change to the clock display.

7 AUX1 input jack (3.5 mm stereo jack)

Use to connect an auxiliary equipment.

8 DETACH button

Press to remove the front panel from the head unit.

9 DISPLAY button

Press to select different displays.

a SW button

Press to select the subwoofer setting menu. Press and hold to select the bass boost setting menu.

b 1 to 6 buttons

Press for preset tuning and disc number search when using a multi-CD player.

c a/b/c/d buttons

Press to perform manual seek tuning, fast forward, reverse and track search controls. Also used for controlling functions.

d BAND button

Press to select among three FM bands and one AM band and to cancel the control mode of functions.

e FUNCTION button

Press to select functions.

Remote control

Operation is the same as when using the buttons on the head unit. See the explanation of the head unit about the operation of each button with the exception of ATT and PAUSE, which is explained below.

f VOLUME button

Press to increase or decrease the volume.

<YRD5079-A/U>6

Basic Operations

Black plate (7,1)

Section

g ATT button

Press to quickly lower the volume level, by about 90%. Press once more to return to the original volume level.

h PAUSE button

Press to turn pause on or off.

i SOURCE button

This unit is turned on by selecting a source. Press to cycle through all the available sources.

Turning the unit on and selecting a source

You can select a source you want to listen to. To switch to the built-in CD player, load a disc in the unit (refer to page 10).

% Press SOURCE to select a source.

Press SOURCE repeatedly to switch between the following sources:

Tuner—Television—Built-in CD player— Multi-CD player—iPod—External unit 1— External unit 2—AUX1—AUX2

them to external unit 1 or external unit 2 is

English

automatically set by this unit.

! When this unit’s blue/white lead is connected

to the vehicle’s auto-antenna relay control terminal, the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the source off.

Adjusting the volume

% Use VOLUME to adjust the sound level.

Turning the unit off

% Press SOURCE and hold until the unit turns off.

Notes

! In the following cases, the sound source will

not change: — When there is no unit corresponding to the

selected source connected to this unit.

— When there is no disc in the unit. — When there is no magazine in the multi-

CD player.

— When the AUX (auxiliary input) is set to off

(refer to page 22).

! AUX1 is set to on by default. Turn off the AUX1

when not in use (refer to Switching the auxili- ary setting on page 22).

! External unit refers to a Pioneer product (such

as one available in the future) that, although incompatible as a source, enables control of basic functions by this unit. Two external units can be controlled by this unit. When two external units are connected, the allocation of

<YRD5079-A/U>7

321

Section

Black plate (8,1)

Tuner

Listening to the radio

Important

If you are using this unit in North, Central or South America, reset the AM tuning step (see Setting the AM tuning step on page 21).

1 Band indicator

Shows which band the radio is tuned to, AM or FM.

2 Frequency indicator

Shows the frequency to which the tuner is tuned.

3 Preset number indicator

Shows which preset has been selected.

4 LOC indicator

Shows when local seek tuning is on.

5 Stereo (5) indicator

Shows when the selected frequency is being broadcast in stereo.

1 Press SOURCE to select the tuner.

Press SOURCE until you see TUNER displayed.

2 Press BAND to select a band.

Press BAND until the desired band (F1, F2, F3 for FM or AM) is displayed.

3 To perform manual tuning, briefly press c or d.

4 To perform seek tuning, press and hold c or d for about one second and release.

The tuner will scan the frequencies until a broadcast strong enough for good reception is found.

# You can cancel seek tuning by briefly pressing c or d. # If you press and hold c or d you can skip sta- tions. Seek tuning starts as soon as you release the button.

Introduction of advanced tuner operation

% Press FUNCTION to display the function names.

Press FUNCTION repeatedly to switch between the following functions: BSM (best stations memory)—LOCAL (local seek tuning)

# To return to the frequency display, press BAND. # If you do not operate the function within about 30 seconds, the display is automatically returned to the frequency display.

Storing and recalling broadcast frequencies

If you press any of the preset tuning buttons 1 to 6 you can easily store up to six broadcast frequencies for later recall with the touch of a button. ! Up to 18 FM stations, six for each of the

three FM bands, and six AM stations can be stored in memory.

% When you find a frequency that you want to store in memory, press one of preset tuning buttons 1 to 6 and hold until the preset number stops flashing.

The number you have pressed will flash in the preset number indicator and then remain lit. The selected radio station frequency has been stored in memory.

<YRD5079-A/U>8

Tuner

Black plate (9,1)

Section

The next time you press the same preset tuning button the radio station frequency is recalled from memory.

# You can also use a and b to recall radio sta- tion frequencies assigned to preset tuning buttons 1 to 6.

Storing the strongest broadcast frequencies

BSM (best stations memory) lets you automatically store the six strongest broadcast frequencies under preset tuning buttons 1 to 6. Once stored you can tune in to those frequencies with the touch of button. ! Storing broadcast frequencies with BSM

may replace broadcast frequencies you have saved using buttons 1 to 6.

1 Press FUNCTION to select BSM.

2 Press a to turn BSM on.

Six strongest broadcast frequencies will be stored in the order of their signal strength.

# To cancel the storage process, press b.

The LOCAL 4 setting allows reception of only

English

the strongest stations, while lower settings let you receive progressively weaker stations.

Tuning in strong signals

Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception.

1 Press FUNCTION to select LOCAL.

2 Press a to turn local seek tuning on.

Local seek sensitivity (e.g., LOCAL 2) appears in the display.

# To turn local seek tuning off, press b.

3 Press c or d to set the sensitivity.

There are four levels of sensitivity for FM and two levels for AM: FM: LOCAL 1—LOCAL 2—LOCAL 3—

LOCAL 4 AM: LOCAL 1—LOCAL 2

<YRD5079-A/U>9

Section

Black plate (10,1)

Built-in Player

Playing a disc

1 Folder number indicator

Shows the folder number currently playing when playing a WMA/MP3/WAV disc.

2 Play time indicator

Shows the elapsed playing time of the current track (file).

3 Track number indicator

Shows the track (file) number currently playing. ! If a track number 100 or more is selected,

d on the left of the track number indicator will light.

4 RPT indicator

Shows when repeat range is selected to current track (file).

5 WMA indicator

Shows when a WMA file is playing.

6 MP3 indicator

Shows when an MP3 file is playing.

1 Insert a CD (CD-ROM) into the disc loading slot.

Playback will automatically start.

# Be sure to turn up the label side of a disc. # After a CD (CD-ROM) has been inserted, press

SOURCE to select the built-in CD player.

# You can eject a CD (CD-ROM) by pressing

EJECT.

2 Press a or b to select a folder when playing a WMA/MP3/WAV disc.

# You cannot select a folder that does not have a WMA/MP3/WAV file recorded in it.

# To return to folder 01 (ROOT), press and hold BAND. However, if folder 01 (ROOT) contains no files, playback commences with folder 02.

3 To perform fast forward or reverse, press and hold c or d.

# If you select ROUGH, pressing and holding c or d enables you to search every 10 tracks in the current disc (folder). (Refer to Searching every 10 tracks in the current disc or folder on page 12.)

4 To skip back or forward to another track, press c or d.

Notes

! Read the precautions with discs and player on

page 24.

! If an error message such as ERROR-11 is dis-

played, refer to Understanding built-in CD player error messages on page 24.

! There is sometimes a delay between starting

up disc playback and the sound being issued. When being read, FRMTREAD is displayed.

! When playing CD-EXTRA or MIXED-MODE

CDs, WMA/MP3/WAVand CD-DA can be swithced by pressing BAND.

! If you have switched between WMA/MP3/

WAV files and audio CD-DA, playback starts at the first track on the disc.

! The built-in CD player can play back a WMA/

MP3/WAV file recorded on CD-ROM. (Refer to page 25 for files that can be played back.)

! When playing back VBR (variable bit rate) re-

corded files, erapsed play time may not be displayed correctly.

! When playing WMA/MP3/WAV disc, there is

no sound on fast forward or reverse.

Introduction of advanced built-in CD player operation

% Press FUNCTION to display the function names.

Press FUNCTION repeatedly to switch between the following functions:

<YRD5079-A/U>10

Built-in Player

Black plate (11,1)

Section

RPT (repeat play)—RDM (random play)— SCAN (scan play)—PAUSE (pause)—COMP

(compression and BMX)—FF/REV (search method)

# To return to the playback display, press BAND. # If you do not operate the function within about

30 seconds, the display is automatically returned to the playback display.

Repeating play

Repeat play plays the same track/folder within the selected repeat play range.

1 Press FUNCTION to select RPT.

2 Press c or d to select the repeat range. DSC – Repeat all tracks TRK – Repeat just the current track FLD – Repeat the current folder

# If you select another folder during repeat play, the repeat play range changes to disc repeat. # When playing CD, performing track search or fast forward/reverse cancels the repeat play automatically. # When playing WMA/MP3/WAV disc, performing track search or fast forward/reverse during TRK (track repeat) changes the repeat play range to folder repeat. # When FLD (folder repeat) is selected, it is not possible to play back a subfolder of that folder.

English

Note

If you turn random play on during FLD and then return to the playback display, FRDM appears in the display.

Scanning tracks or folders

Scan play searches the song within the selected repeat range.

1 Select the repeat range.

Refer to Repeating play on this page.

2 Press FUNCTION to select SCAN.

3 Press a to turn scan play on. SCAN :ON appears in the display. The first 10

seconds of each track is played.

4 When you find the desired track press b to turn scan play off.

# If the display has automatically returned to the playback display, select SCAN again by pressing FUNCTION.

Notes

! After scanning of a disc (folder) is finished,

normal playback of the tracks will begin again.

! If you turn scan play on during FLD and then

return to the playback display, FSCN appears in the display.

Playing tracks in random order

Random play plays tracks in a random order within the selected repeat range.

1 Select the repeat range.

Refer to Repeating play on this page.

2 Press FUNCTION to select RDM.

3 Press a to turn random play on. RDM :ON appears in the display. Tracks will

play in a random order.

# To turn random play off, press b.

Pausing disc playback

Pause lets you temporarily stop playback of the disc.

1 Press FUNCTION to select PAUSE.

2 Press a to turn pause on. PAUSE:ON appears in the display. Play of the

current track pauses.

# To turn pause off, press b.

<YRD5079-A/U>11

Section

Black plate (12,1)

Built-in Player

Using compression and BMX

Using the COMP (compression) and BMX functions let you adjust the sound playback quality of this unit.

1 Press FUNCTION to select COMP.

2 Press a or b to select your favorite setting. COMP OFF—COMP 1—COMP 2— COMP OFF—BMX 1—BMX 2

Searching every 10 tracks in the current disc or folder

You can switch the search method between fast forward/reverse and searching every 10 tracks. Selecting ROUGH enables you to search every 10 tracks.

1 Press FUNCTION to select FF/REV.

# If the search method ROUGH has been pre- viously selected, ROUGH will be displayed.

2 Press d to select ROUGH.

! FF/REV – Fast forward and reverse ! ROUGH – Searching every 10 tracks

# To select FF/REV, press c.

3 Press BAND to return to the playback display.

4 Press and hold c or d to search every 10 tracks on a disc (folder).

# If the rest of track number is less than 10, press and hold c or d recalls the first (last) one.

For CD TEXT discs

Play time—DISC TTL (disc title)—ART NAME (disc artist name)—TRK TTL (track title)— ART NAME (track artist name)

For WMA/MP3 discs

Play time—FOLDER (folder name)—FILE (file name)—TRK TTL (track title)—ART NAME (artist name)—ALBM TTL (album title)— COMMENT (comment)—Bit rate

For WAV discs

Play time—FOLDER (folder name)—FILE (file name)—Sampling frequency

Notes

! You can scroll to the left of the title by pressing

and holding DISPLAY.

! Audio CD that contain certain information

such as text and/or number are CD TEXT.

! If specific information has not been recorded

on a disc, NO XXXX will be displayed (e.g., NO NAME).

! When playing back VBR-recorded WMA files,

the average bit rate value is displayed.

! When playing back VBR (variable bit rate)-re-

corded MP3 files, VBR is displayed instead of bit rate value.

! Depending on the version of iTunes

write MP3 files onto a disc, comment information may not be correctly displayed. — iTunes is a trademark of Apple Computer,

Inc., registered in the U.S. and other countries.

! The sampling frequency shown in the display

may be abbreviated.

used to

Displaying text information on disc

% Press DISPLAY.

Press DISPLAY repeatedly to switch between the following settings:

<YRD5079-A/U>12

321

Multi-CD Player

Black plate (13,1)

Section

Playing a CD

You can use this unit to control a multi-CD player, which is sold separately. ! This unit does not have a disc title input

function.

! Only those functions described in this man-

ual are supported by 50-disc multi-CD players.

1 Disc number indicator

Shows the disc number currently playing.

2 Play time indicator

Shows the elapsed playing time of the current track.

3 Track number indicator

Shows the track number currently playing.

4 RPT indicator

Shows when repeat range is selected to current track.

3 To perform fast forward or reverse,

English

press and hold c or d.

4 To skip back or forward to another track, press c or d.

Notes

! When the multi-CD player performs the pre-

paratory operations, READY is displayed.

! If an error message such as ERROR-11 is dis-

played, refer to the multi-CD player owner’s manual.

! If there are no discs in the multi-CD player ma-

gazine, NO DISC is displayed.

Introduction of advanced multi-CD player operation

% Press FUNCTION to display the function names.

Press FUNCTION repeatedly to switch between the following functions:

RPT (repeat play)—RDM (random play)— SCAN (scan play)—ITS-P (ITS play)—PAUSE (pause)—COMP (compression and DBE)

# To return to the playback display, press BAND. # If you do not operate the function within about

30 seconds, the display is automatically returned to the playback display.

1 Press SOURCE to select the multi-CD player.

Press SOURCE until you see MULTI CD displayed.

2 Select a disc you want to listen to with the 1 to 6 buttons.

For discs 1 to 6, press the corresponding button number. For discs 7 to 12, press and hold the corresponding numbers, such as 1 for disc 7, until the disc number appears in the display.

# You can also sequentially select a disc by pressing a/b.

Repeating play

There are three repeat play ranges for the multi-CD player: MCD (multi-CD player repeat), TRK (one-track repeat) and DSC (disc repeat).

1 Press FUNCTION to select RPT.

2 Press c or d to select the repeat range.

! MCD – Repeat all discs in the multi-CD

player magazine

! TRK – Repeat just the current track ! DSC – Repeat the current disc

<YRD5079-A/U>13

Section

Black plate (14,1)

Multi-CD Player

Notes

! If you select other discs during repeat play,

the repeat play range changes to MCD.

! If you perform track search or fast forward/re-

verse during TRK, the repeat play range changes to DSC.

Playing tracks in random order

Random play lets you play back tracks in random order within the repeat range, MCD and

DSC.

1 Select the repeat range.

Refer to Repeating play on the previous page.

2 Press FUNCTION to select RDM.

3 Press a to turn random play on. RDM :ON appears in the display. Tracks will

play in a random order within the previously selected MCD or DSC ranges.

# To turn random play off, press b.

Note

If you turn random play on during DSC and then return to the playback display, DRDM appears in the display.

Scanning CDs and tracks

While you are using DSC, the beginning of each track on the selected disc plays for about 10 seconds. When you are using MCD, the beginning of the first track of each disc is played for about 10 seconds.

1 Select the repeat range.

Refer to Repeating play on the previous page.

2 Press FUNCTION to select SCAN.

3 Press a to turn scan play on. SCAN :ON appears in the display. The first 10

seconds of each track of the current disc (or the first track of each disc) is played.

4 When you find the desired track (or disc) press b to turn scan play off.

# If the display has automatically returned to the playback display, select SCAN again by pressing FUNCTION.

Notes

! After track or disc scanning is finished, nor-

mal playback of the tracks will begin again.

! If you turn scan play on during MCD and then

return to the playback display, DSCN appears in the display.

Pausing CD playback

Pause lets you temporarily stop playback of the CD.

1 Press FUNCTION to select PAUSE.

2 Press a to turn pause on. PAUSE:ON appears in the display. Play of the

current track pauses.

# To turn pause off, press b.

Using compression and bass emphasis

You can use these functions only with a multiCD player that supports them.

Using COMP (compression) and DBE (dynamic bass emphasis) functions lets you adjust the sound playback quality of the multiCD player. Each of the functions has a twostep adjustment. The COMP function balances the output of louder and softer sounds at higher volumes. DBE boosts bass levels to give playback a fuller sound. Listen to each of the effects as you select them and use the one that best enhances the playback of the track or CD that you are listening to.

<YRD5079-A/U>14

Multi-CD Player

Black plate (15,1)

Section

1 Press FUNCTION to select COMP.

# If the multi-CD player does not support COMP/DBE, NO COMP is displayed when you attempt to select it.

2 Press a or b to select your favorite setting. COMP OFF—COMP 1—COMP 2— COMP OFF—DBE 1—DBE 2

Using ITS playlists

ITS (instant track selection) lets you make a playlist of favorite tracks from those in the multi-CD player magazine. After you have added your favorite tracks to the playlist you can turn on ITS play and play just those selections.

Creating a playlist with ITS programming

You can use ITS to enter and play back up to 99 tracks per disc from up to 100 discs (with the disc titles). (With multi-CD players sold before the CDX-P1250 and CDX-P650, up to 24 tracks can be stored in the playlist.)

1 Play a CD that you want to program.

Press a or b to select the CD.

2 Press FUNCTION and hold to select ITS.

English

Note

After data for 100 discs has been stored in memory, data for a new disc will overwrite the oldest one.

Playback from your ITS playlist

ITS play lets you listen to the tracks that you have entered into your ITS playlist. When you turn on ITS play, tracks from your ITS playlist in the multi-CD player will begin to play.

1 Select the repeat range.

Refer to Repeating play on page 13.

2 Press FUNCTION to select ITS-P.

3 Press a to turn ITS play on. ITS-P:ON appears in the display. Playback be-

gins of those tracks from your playlist within the previously selected MCD or DSC ranges.

# If no tracks in the current range are programmed for ITS play, then EMPTY is displayed. # To turn ITS play off, press b.

Erasing a track from your ITS playlist

You can delete a track from your ITS playlist if ITS play is on. If ITS play is already on, skip to step 2. If ITS play is not already on, press FUNCTION.

3 Select the desired track by pressing c or d.

4 Press a to store the currently playing track in the playlist. ITS IN is displayed briefly and the currently

playing selection is added to your playlist. The display then shows ITS again.

5 Press BAND to return to the playback display.

1 Play the CD with the track you want to delete from your ITS playlist, and turn ITS play on.

Refer to Playback from your ITS playlist on this page.

2 Press FUNCTION and hold to select ITS.

3 Select the desired track by pressing c or d.

<YRD5079-A/U>15

Section

Black plate (16,1)

Multi-CD Player

4 Press b to erase the track from your ITS playlist.

The currently playing selection is erased from your ITS playlist and playback of the next track from your ITS playlist begins.

# If there are no tracks from your playlist in the current range, EMPTY is displayed and normal play resumes.

5 Press BAND to return to the playback display.

Erasing a CD from your ITS playlist

You can delete all tracks of a CD from your ITS playlist if ITS play is off.

1 Play the CD that you want to delete.

Press a or b to select the CD.

2 Press FUNCTION and hold to select ITS.

3 Press b to erase all tracks on the currently playing CD from your ITS playlist.

All tracks on the currently playing CD are erased from your playlist and ITS CLR is displayed.

4 Press BAND to return to the playback display.

Play time—DISC TTL (disc title)—ART NAME (disc artist name)—TRK TTL (track title)— ART NAME (track artist name)

# If specific information has not been recorded on a CD TEXT disc, NO XXXX will be displayed (e.g., NO NAME).

Note

You can scroll to the left of the title by pressing and holding DISPLAY.

Using CD TEXT functions

You can use these functions only with a CD TEXT compatible multi-CD player.

Some discs have certain information encoded on the disc during manufacture. These discs may contain such information as the CD title, track title, artist’s name and playback time and are called CD TEXT discs. Only these specially encoded CD TEXT discs support the functions listed below.

% Press DISPLAY.

Press DISPLAY repeatedly to switch between the following settings:

<YRD5079-A/U>16

21345

Audio Adjustments

Black plate (17,1)

Section

Introduction of audio adjustments

1 Audio display

Shows the audio adjustment status.

2 BASS indicator

Shows when the bass boost is in effect.

3 SW indicator

Shows when the subwoofer output is turned on.

4 LOUD indicator

Appears in the display when loudness is turned on.

5 FIE indicator

Shows when the front image enhancer is turned on.

% Press AUDIO to display the audio function names.

Press AUDIO repeatedly to switch between the following audio functions: FAD (balance adjustment)—EQ (equalizer curve adjustment)—LOUD (loudness)— SUB.W (subwoofer on/off setting)—80: 0 (subwoofer setting)—HPF (high pass filter)—BASS (bass boost)—FIE (front image enhancer)— SLA (source level adjustment)

# When the subwoofer controller setting is P/O :FUL, you cannot switch to SUB.W. (Refer to page 22.) # You can select the 80: 0 only when subwoofer output is turned on in SUB.W. # When the F.I.E. function is on, you cannot select HPF.

# When the rear output setting is R-SP :S/W,

English

you cannot select FIE. # When selecting the FM tuner as the source, you cannot switch to SLA. # To return to the display of each source, press BAND. # If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display.

Using balance adjustment

You can change the fader/balance setting so that it can provide you an ideal listening environment in all occupied seats.

1 Press AUDIO to select FAD.

# If the balance setting has been previously adjusted, BAL will be displayed.

2 Press a or b to adjust front/rear speaker balance. FAD :F15 to FAD :R15 is displayed as the

front/rear speaker balance moves from front to rear.

# FAD : 0 is the proper setting when only two speakers are used. # When the rear output setting is R-SP :S/W, you cannot adjust front/rear speaker balance. Refer to Setting the rear output and subwoofer controller on page 22.

3 Press c or d to adjust left/right speaker balance. BAL : L15 to BAL : R15 is displayed as the left/

right speaker balance moves from left to right.

Using the equalizer

The equalizer lets you adjust the equalization to match car interior acoustic characteristics as desired.

<YRD5079-A/U>17

Section

Black plate (18,1)

Audio Adjustments

Recalling equalizer curves

There are six stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves:

Display Equalizer curve

POWERFUL Powerful

NATURAL Natural

VOCAL Vocal

CUSTOM Custom

EQ FLAT Flat

SPR-BASS Super bass

! CUSTOM is an adjusted equalizer curve

that you create. If you make adjustments to an equalizer curve, the equalizer curve setting will be memorized in CUSTOM.

! When EQ FLAT is selected no supplement

or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between EQ FLAT and a set equalizer curve.

% Press EQ to select the equalizer.

Press EQ repeatedly to switch between the following equalizers:

POWERFUL—NATURAL—VOCAL—CUSTOM —EQ FLAT—SPR-BASS

Adjusting equalizer curves

You can adjust the currently selected equalizer curve setting as desired. Adjusted equalizer curve settings are memorized in CUSTOM.

1 Press AUDIO to select EQ.

2 Press c or d to select the equalizer band to adjust. EQ-L (low)—EQ-M (mid)—EQ-H (high)

3 Press a or b to adjust the level of the equalizer band. +6 to –6 is displayed as the level is increased

or decreased.

# You can then select another band and adjust the level.

Note

If you make adjustments, CUSTOM curve is updated.

Fine-adjusting equalizer curve

You can adjust the center frequency and the Q factor (curve characteristics) of each currently selected curve band (EQ-L/EQ-M/EQ-H).

Level (dB)

Q=2W

Q=2N

Center frequency

1 Press AUDIO and hold until frequency and the Q factor (e.g., F- 80:Q1W) appears in the display.

2 Press AUDIO to select the band for adjustment from among low, mid and high.

Press AUDIO repeatedly to switch between the following functions: Low—Mid—High

3 Press c or d to select the desired frequency.

Low: 40—80—100—160 (Hz) Mid: 200—500—1k—2k (Hz) High: 3k—8k—10k—12k (Hz)

4 Press a or b to select the desired Q factor. 2N—1N—1W—2W

Note

If you make adjustments, CUSTOM curve is updated.

Frequency (Hz)

<YRD5079-A/U>18

Audio Adjustments

Black plate (19,1)

Section

Adjusting loudness

Loudness compensates for deficiencies in the low- and high-sound ranges at low volume.

1 Press AUDIO to select LOUD.

2 Press a to turn loudness on.

Loudness level (e.g., LOUD :MID) appears in the display.

# To turn loudness off, press b.

3 Press c or d to select a desired level. LOW (low)—MID (mid)—HI (high)

Using subwoofer output

This unit is equipped with a subwoofer output which can be turned on or off.

1 Press AUDIO to select SUB.W.

# You can also select the subwoofer setting menu by pressing SW on the unit. # When the subwoofer controller setting is

P/O :FUL, you cannot select SUB.W.

2 Press a to turn subwoofer output on. SUB.W:NOR appears in the display. Subwoo-

fer output is now on.

# If the subwoofer output phase has been set to the reverse, SUB.W:REV will be displayed. # To turn subwoofer output off, press b.

3 Press c or d to select the phase of subwoofer output.

Press c to select reverse phase and REV appears in the display. Press d to select normal phase and NOR appears in the display.

# When the subwoofer output is on, you can se-

English

lect 80: 0. # If the subwoofer setting has been previously adjusted, the frequency of that previously selected will be displayed instead of 80.

2 Press c or d to select cut-off frequency. 50—63—80—100—125 (Hz)

Only frequencies lower than those in the selected range are outputted from the subwoofer.

3 Press a or b to adjust the output level of the subwoofer. +6 to –24 is displayed as the level is increased

or decreased.

Using the high pass filter

When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are outputted from the front or rear speakers.

1 Press AUDIO to select HPF.

# When the F.I.E. function is on, you cannot select HPF.

2 Press a to turn high pass filter on. HPF : 80 appears in the display. High pass fil-

ter is now on.

# If the high pass filter has been previously adjusted, the frequency of that previously selected will be displayed instead of HPF : 80. # To turn high pass filter off, press b.

Adjusting subwoofer settings

When the subwoofer output is on, you can adjust the cut-off frequency and the output level of the subwoofer.

1 Press AUDIO to select 80: 0.

# You can also select the subwoofer setting menu by pressing SW on the unit.

3 Press c or d to select cut-off frequency. 50—63—80—100—125 (Hz)

Only frequencies higher than those in the selected range are outputted from the front or rear speakers.

<YRD5079-A/U>19

Section

Black plate (20,1)

Audio Adjustments

Boosting the bass

Bass boost function boosts the bass level of sound lower than 100 Hz. The more the bass level is increased, the more the bass sound is emphasized and the entire sound becomes powerful. When using this function with the subwoofer, the sound under the cut-off frequency is boosted.

1 Press AUDIO to select BASS.

# You can also select the bass boost setting by pressing and holding SW.

2 Press a or b to select a desired level. 0 to +6 is displayed as the level is increased or

decreased.

Front image enhancer (F.I.E.)

The F.I.E. (Front Image Enhancer) function is a simple method of enhancing front imaging by cutting mid- and high-range frequency output from the rear speakers, limiting their output to low-range frequencies. You can select the frequency you want to cut.

Precaution

When the F.I.E. function is deactivated, the rear speakers output sound of all frequencies, not just bass sounds. Reduce the volume before disengaging F.I.E. to prevent a sudden increase in vo lume.

1 Press AUDIO to select FIE.

# When the rear output setting is R-SP :S/W, you cannot select FIE. # When the HPF function is on, you cannot select FIE.

2 Press a to turn F.I.E. on.

# To turn F.I.E. off, press b.

Notes

! After turning the F.I.E. function on, use the bal-

ance adjustment (refer to page 17) and adjust front and rear speaker volume levels until they are balanced.

! Turn the F.I.E. function off when using a 2-

speaker system.

! F.I.E. function is effective only for built-in

amplifier.

Adjusting source levels

SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. ! Settings are based on the FM tuner volume

level, which remains unchanged.

1 Compare the FM tuner volume level with the level of the source you wish to adjust.

2 Press AUDIO to select SLA.

3 Press a or b to adjust the source volume. SLA : +4 to SLA : –4 is displayed as the source

volume is increased or decreased.

Notes

! The AM tuner volume level can also be ad-

justed with source level adjustments.

! The built-in CD player and the multi-CD player

are set to the same source level adjustment volume automatically.

! External unit 1 and external unit 2 are set to

the same source level adjustment volume automatically.

3 Press c or d to select a desired frequency. 100—160—250 (Hz)

<YRD5079-A/U>20

Other Functions

Black plate (21,1)

Section

Adjusting initial settings

Using the initial settings, you can customize various system settings to achieve optimal performance from this unit.

1 Function display

Shows the function status.

1 Press SOURCE and hold until the unit turns off.

2 Press SOURCE and hold again until the clock appears in the display.

3 Press FUNCTION to select one of the initial settings.

Press FUNCTION repeatedly to switch between the following settings: Clock—FM (FM tuning step)—AM (AM tuning step)—AUX1 (auxiliary input 1)—AUX2 (auxiliary input 2)—R-SP (rear output and subwoofer controller) Use the following instructions to operate each particular setting.

# To cancel initial settings, press BAND. # You can also cancel initial settings by holding

down SOURCE until the unit turns off.

Setting the clock

Use these instructions to set the clock.

1 Press FUNCTION to select clock.

2 Press c or d to select the segment of the clock display you wish to set.

Hour—Minute As you select segments of the clock display the segment selected will blink.

3 Press a or b to set the clock.

English

Pressing a will increase the selected hour or minute. Pressing b will decrease the selected hour or minute.

Setting the FM tuning step

The FM tuning step employed by seek tuning can be switched between 100 kHz, the preset step, and 50 kHz.

1 Press FUNCTION to select FM.

2 Press c or d to select the FM tuning step.

Pressing c or d will switch the FM tuning step between 100 kHz and 50 kHz. The selected FM tuning step will appear in the display.

Note

If seek tuning is performed in 50 kHz steps, stations may be tuned in imprecisely. Tune in the stations with manual tuning or use seek tuning again.

Setting the AM tuning step

The AM tuning step can be switched between 9 kHz, the preset step, and 10 kHz. When using the tuner in North, Central or South America, reset the tuning step from 9 kHz (531 kHz to 1 602 kHz allowable) to 10 kHz (530 kHz to 1 640 kHz allowable).

1 Press FUNCTION to select AM.

2 Press c or d to select the AM tuning step.

Pressing c or d will switch the AM tuning step between 9 kHz and 10 kHz. The selected AM tuning step will appear in the display.

<YRD5079-A/U>21

Section

Black plate (22,1)

Other Functions

Switching the auxiliary setting

Auxiliary equipments connected to this unit can be activated individually. Set each AUX source to ON when using. About connecting or using auxiliary equipments, refer to Using the AUX source on this page.

1 Press FUNCTION to select AUX1/AUX2.

2 Press a or b to turn AUX1/AUX2 on or off.

Setting the rear output and subwoofer controller

This unit’s rear output (rear speaker leads output and RCA rear output) can be used for fullrange speaker (R-SP :FUL) or subwoofer (R-SP :S/W) connection. If you switch the rear output setting to R-SP :S/W, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp. Initially, the unit is set for rear full-range speaker connection (R-SP :FUL). When rear output is connected to full range speakers (when R-SP :FUL is selected), you can connect other full range speakers (P/O :FUL) or a subwoofer (P/O :S/W) to the RCA rear output.

1 Press FUNCTION to select R-SP.

2 Press a or b to switch the rear output setting.

Pressing a or b will switch between R-SP :FUL (full-range speaker) and R-SP :S/W (subwoofer) and that status will be displayed.

# When no subwoofer is connected to the rear output, select R-SP :FUL. # When a subwoofer is connected to the rear output, set for subwoofer R-SP :S/W. # When the rear output setting is R-SP :S/W, you cannot operate the following procedure.

3 Press c or d to switch the subwoofer output or rear output.

Pressing c or d will switch between P/O :S/W and P/O :FUL and that status will be displayed.

Notes

! Even if you change this setting, there is no

output unless you turn the subwoofer output on (refer to Using subwoofer output on page

19).

! If you change this setting, subwoofer output

in the audio menu return to the factory settings.

Turning the clock display on or off

You can turn the clock display on or off.

% Press CLOCK to turn the clock display on or off.

Each press of CLOCK turns the clock display on or off.

# The clock display disappears temporarily when you perform other operations, but the clock display appears again after 25 seconds.

Note

Even when the sources are off, the clock display appears on the display. Pressing CLOCK turns the clock display on or off.

Using the AUX source

This unit can control up to two auxiliary equipments such as VCR or portable devices (sold separately). When connected, auxiliary equipments are automatically read in as AUX sources and assigned to AUX1 or AUX2. The relationship between AUX1 and AUX2 sources is explained below.

<YRD5079-A/U>22

Other Functions

Black plate (23,1)

Section

About AUX connection method

You have two methods to connect auxiliary equipments to this unit.

Stereo mini pin plug cable (AUX1)

When connecting auxiliary equipment using a stereo mini plug cable

% Insert the stereo mini plug into the AUX input jack on this unit.

IP-BUS-RCA interconnector (AUX2)

When connecting auxiliary equipment using an IP-BUS-RCA Interconnector (sold separately)

% Use an IP-BUS-RCA Interconnector such as the CD-RB20/CD-RB10 (sold separetely) to connect this unit to auxiliary equipment featuring RCA output.

For more details, refer to the IP-BUS-RCA Interconnector owner’s manual.

# You can only make this type of connection if the auxiliary equipment has RCA outputs.

Selecting AUX as the source

% Press SOURCE to select AUX (AUX1 or AUX2) as the source.

Press SOURCE until AUX appears in the display.

# If the auxiliary setting is not turned on, AUX cannot be selected. For more details, see Switch- ing the auxiliary setting on the previous page.

For details concerning operation, refer to the

English

iPod adapter’s operation manuals. This section provides information on iPod operations with this unit which differs from that described in the iPod adapter’s operation manual.

! This unit is a head unit group 1 unit. ! iPod is a trademark of Apple Computer,

Inc., registered in the U.S. and other countries.

1 Song title indicator

Shows the title of the currently playing song.

iPod operation

iPod operation of the following function with this unit differs. ! Displaying text information on iPod (Refer to

this page.)

Displaying text information on iPod

Text information recorded on the iPod can be displayed.

% Press DISPLAY.

Press DISPLAY repeatedly to switch between the following settings: Song title—Artist name—Album title—Repeat play status—Random play status—Play time

# If the characters recorded on the iPod are not compatible with this unit, those characters will not be displayed.

Introduction of iPod

operation

You can use this unit to control an iPod adapter, which is sold separately.

Note

You can scroll to the left the text information by pressing and holding DISPLAY.

<YRD5079-A/U>23

Appendix

Black plate (24,1)

Additional Information

Understanding built-in CD player error messages

When you contact your dealer or your nearest Pioneer Service Center, be sure to record the error message.

Message Cause Action

ERROR-11, 12, 17, 30

ERROR-15 The inserted disc

ERROR-10, 11, 12, 15, 17, 30, A0

ERROR-22, 23 The CD format

NO AUDIO The inserted disc

PROTECT All the files on

SKIPPED The inserted disc

Dirty disc Clean disc.

Scratched disc Replace disc.

does not contain any data

Electrical or mechanical

cannot be played back

does not contain any files that can be played back

the inserted disc are secured by DRM

contains WMA files that are protected by DRM

Replace disc.

Turn the ignition ON and OFF, or switch to a different source, then back to the CD player.

Replace disc.

Handling guideline of discs and player

! Use only discs featuring either of following

two logos.

! Use only conventional, fully circular discs.

Do not use shaped discs.

! Use 12-cm or 8-cm CD. Do not use an

adapter when playing 8-cm CDs.

! Do not insert anything other than a CD into

the CD loading slot.

! Do not use cracked, chipped, warped, or

otherwise damaged discs as they may damage the player.

! Unfinalized CD-R/CD-RW disc playback is

not possible.

! Do not touch the recorded surface of the

discs.

! Store discs in their cases when not in use. ! Avoid leaving discs in excessively hot envir-

onments including under direct sunlight.

! Do not attach labels, write on or apply che-

micals to the surface of the discs.

! To clean a CD, wipe the disc with a soft

cloth outward from the center.

! Condensation may temporarily impair the

player’s performance. Leave it to adjust to the warmer temperature for about one hour. Also, wipe any dump discs with a soft cloth.

! Playback of discs may not be possible be-

cause of disc charac teristics, disc format, recorded application, playback environment, storage conditions and so on.

! Text information may not be correctly dis-

played depending on the recorded environment.

<YRD5079-A/U>24

Additional Information

Black plate (25,1)

Appendix

! Road shocks may interrupt disc playback. ! Read the precautions with discs before

using them.

Dual Discs

! Dual Discs are two-sided discs that have a

recordable CD for audio on one side and a recordable DVD for video on the other.

! Since the CD side of Dual Discs is not phy-

sically compatible with the general CD standard, it may not be possible to play the CD side with this unit.

! Frequent loading and ejecting of a Dual

Disc may result in scratches on the disc. Serious scratches can lead to playback problems on this unit. In some cases, a Dual Disc may become stuck in the disc loading slot and will not eject. To prevent this, we recommend you refrain from using Dual Disc with this unit.

! Please refer to the information from the

disc manufacturer for more detailed information about Dual Discs.

WMA, MP3 and WAV files

! Depending on the version of Windows

Media Player used to encode WMA files, album names and other text information may not be correctly displayed.

! There may be a slight delay when starting

playback of WMA files encoded with image data.

! ISO 9660 Level 1 and 2 compliant. Romeo

and Joliet file systems are both compatible with this player.

! Multi-session playback is possible. ! WMA/MP3/WAV files are not compatible

with packet write data transfer.

! Only 64 characters from the beginning can

be displayed as a file name (including the extension such as .wma, .mp3 or .wav) or a folder name.

! Folder selection sequence or other opera-

English

tion may be altered depending on the encoding or writing software.

! Regardless of the length of blank section

between the songs of original recording, WMA/MP3/WAV discs will play with a short pause between songs.

! File extensions such as .wma, .mp3 or .wav

must be used properly.

Example of a hierarchy

: Folder

: File

3 4

Level 1 Level 2 Level 3 Level 4

! This unit assigns folder numbers. The user

cannot assign folder numbers.

! Folder hierarchy is allowed up to eight tiers.

However, practical hierarchy of folder is less than two tiers.

! Up to 99 folders on a disc can be played

back.

Compressed audio compatibility

WMA

! Compatible format: WMA encoded by Win-

dows Media Player Ver. 7, 7.1, 8, 9 or 10

! Bit rate: 48 kbps to 320 kbps (CBR), 48 kbps

to 384 kbps (VBR)

! Sampling frequency: 32 kHz to 48 kHz ! Windows Media Audio 9 Professional, Loss-

less, Voice: No

<YRD5079-A/U>25

Appendix

Additional Information

MP3

! Bit rate: 8 kbps to 320 kbps ! Sampling frequency: 16 kHz to 48 kHz (32,

44.1, 48 kHz for emphasis)

! Compatible ID3 tag version: 1.0, 1.1, 2.2,

2.3, 2.4 (ID3 tag Version 2.x is given priority than Version 1.x.)

! M3u playlist: No ! MP3i (MP3 interactive), mp3 PRO: No

WAV

! Compatible format: Linear PCM (LPCM),

MS ADPCM

! Quantization bits: 8 and 16 (LPCM), 4 (MS

ADPCM)

! Sampling frequency: 16 kHz to 48 kHz

(LPCM), 22.05 kHz to 44.1 kHz (MS ADPCM)

Black plate (26,1)

<YRD5079-A/U>26

Additional Information

Black plate (27,1)

Appendix

Specifications

General

Rated power source ............... 14.4 V DC

(allowable voltage range:

12.0 V to 14.4 V DC)

Grounding system ................... Negative type

Max. current consumption

..................................................... 10.0 A

Dimensions (W × H × D):

DIN

Chassis ..................... 178 × 50 × 162 mm

Nose ...........................188 × 58 × 14 mm

Chassis ..................... 178 × 50 × 162 mm

Nose ...........................170 × 48 × 14 mm

Weight .......................................... 1.3 kg

Audio

Maximum power output ....... 50 W × 4

50 W × 2/4 W + 70 W × 1/2 W (for subwoofer)

Continuous power output ...22 W × 4 (50 Hz to 15 000

Hz, 5% THD, 4 W load, both channels driven)

Load impedance ...................... 4 W to 8 W ×4

4 W to 8 W ×2+2W ×1

Preout max output level/output impedance

..................................................... 2.2 V/1 kW

Equalizer (3-Band Parametric Equalizer):

Low

Frequency ................ 40/80/100/160 Hz

Q Factor .................... 0.35/0.59/0.95/1.15 (+6 dB

when boosted)

Gain ............................ ±12 dB

Mid

Frequency ................ 200/500/1k/2k Hz

Q Factor .................... 0.35/0.59/0.95/1.15 (+6 dB

when boosted)

Gain ............................ ±12 dB

High

Frequency ................ 3.15k/8k/10k/12.5k Hz

Q Factor .................... 0.35/0.59/0.95/1.15 (+6 dB

when boosted)

Gain ............................ ±12 dB

Loudness contour:

Low ....................................... +3.5 dB (100 Hz), +3 dB (10

kHz)

Mid ....................................... +10 dB (100 Hz), +6.5 dB

(10 kHz)

High ..................................... +11 dB (100 Hz), +11 dB

(10 kHz) (volume: –30 dB)

HPF:

Frequency .......................... 50/63/80/100/125 Hz

Slope ....................................–12 dB/oct

Subwoofer (mono):

Frequency .......................... 50/63/80/100/125 Hz

Slope ....................................–18 dB/oct

Gain ...................................... +6 dB to –24 dB

Phase .................................. Normal/Reverse

Bass boost:

Gain ...................................... +12 dB to 0 dB

CD player

System .......................................... Compact disc audio system

Usable discs .............................. Compact disc

Signal format:

Sampling frequency ..... 44.1 kHz

Number of quantization bits

........................................... 16; linear

Frequency characteristics ... 5 Hz to 20 000 Hz (±1 dB)

Signal-to-noise ratio ............... 94 dB (1 kHz) (IEC-A net-

work)

Dynamic range ......................... 92 dB (1 kHz)

Number of channels .............. 2 (stereo)

MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3

WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10 (2ch

audio)

(Windows Media Player)

WAV signal format .................. Linear PCM & MS ADPCM

FM tuner

Frequency range ...................... 87.5 MHz to 108.0 MHz

Usable sensitivity ..................... 8 dBf (0.7 µV/75 W, mono,

S/N: 30 dB)

Signal-to-noise ratio ............... 75 dB (IEC -A network)

Distortion .....................................0.3 % (at 65 dBf, 1 kHz,

stereo)

0.1 % (at 65 dBf, 1 kHz,

mono)

Frequency response ............... 30 Hz to 15 000 Hz (±3 dB)

Stereo separation .................... 45 dB (at 65 dBf, 1 kHz)

AM tuner

Frequency range ...................... 531 kHz to 1 602 kHz (9 kHz)

530 kHz to 1 640 kHz (10

kHz)

Usable sensitivity ..................... 18 µV (S/N: 20 dB)

Signal-to-noise ratio ............... 65 dB (IEC -A network)

Infrared remote control

Wavelength ................................. 940 nm ±50 nm

Output ........................................... typ; 12 mw/sr per Infrared

LED

Note

Specifications and the design are subject to possible modifications without notice due to improvements.

English

<YRD5079-A/U>27

Black plate (28,1)

Contenido

Gracias por haber comprado este producto Pioneer.

Lea con detenimiento estas instrucciones sobre el funcionamiento del aparato, para que pueda darle el mejor uso posible. Una vez que las haya leído, conserve

este manual en un lugar seguro para consultarlo en el futuro.

Antes de comenzar

Acerca de esta unidad 30 Visite nuestro sitio Web 30 Acerca de WMA 30 Acerca de MP3 30 Uso y cuidado del mando a distancia 31

– Instalación de la batería 31 – Uso del mando a distancia 31

Protección del producto contra robo 31

– Extracción de la carátula 31 – Colocación de la carátula 32

Funciones básicas Qué es cada cosa 33

– Unidad principal 33 – Mando a distancia 34

Encendido de la unidad y selección de una

fuente 34 Ajuste del volumen 34 Apagado de la unidad 34

Sintonizador

Para escuchar la radio 35 Introducción a las funciones avanzadas del

sintonizador 35 Almacenamiento y recuperación de

frecuencias 35 Almacenamiento de las frecuencias de radio

más fuertes 36 Sintonización de señales fuertes 36

Reproductor incorporado

Reproducción de un disco 37 Introducción a las funciones avanzadas del

reproductor de CD incorporado 38 Repetición de reproducción 38 Reproducción de las pistas en orden

aleatorio 38 Exploración de pistas o carpetas 38 Pausa de la reproducción de un disco 39 Uso de la compresión y BMX 39

Búsqueda cada 10 pistas en el disco o

carpeta actual 39

Visualización de información de texto en el

disco 40

Reproductor de CD múltiple

Reproducción de un CD 41 Introducción a las funciones avanzadas del

reproductor de CD múltiple 41

Repetición de reproducción 41 Reproducción de las pistas en orden

aleatorio 42 Exploración de CD y pistas 42 Pausa de la reproducción de un CD 42 Uso de la compresión y del enfatizador de

graves 43 Uso de listas de reproducción ITS 43

– Creación de una lista de reproducción

con la programación ITS 43

– Reproducción de la lista de

reproducción ITS 44

– Borrado de una pista de la lista de

reproducción ITS 44

– Borrado de un CD de la lista de

reproducción ITS 44

Uso de las funciones CD TEXT 45

Ajustes de audio

Introducción a los ajustes de audio 46 Uso del ajuste del balance 46 Uso del ecualizador 47

– Recuperación de las curvas de

ecualización 47

– Ajuste de las curvas de

ecualización 47

– Ajuste preciso de la curva de

ecualización 47 Ajuste de la sonoridad 48 Uso de la salida de subgraves 48

– Configuración de los ajustes de

subgraves 48

<YRD5079-A/U>28

+ 64 hidden pages