Pioneer DDJ-RR User Manual
DJ controller
DDJ-RR
http://pioneerdj.com/support/
http://rekordbox.com/
For FAQs and other support information for this product, visit the above site.
Operating Instructions
Contents
How to read this manual
! Thank you for buying this Pioneer DJ product.
Be sure to read both this manual and the Operating Instructions
(Quick Start Guide). Both contain important information that you
should understand before using this product.
For how to obtain the rekordbox Operating Instructions, see Viewing
the Operating Instructions of rekordbox (p. 5 ).
! In this manual, names of menus displayed on the product and on
the computer screen, as well as names of buttons and terminals,
etc., are indicated within brackets. (E.g.: [File], [CUE] button, and
[PHONES] output terminals)
! Please note that the screens and specifications of the software
described in this manual as well as the external appearance and
specifications of the hardware are currently under development and
may differ from the final specifications.
! Please note that depending on the operating system version, web
browser settings, etc., operation may differ from the procedures
described in this manual.
! Please note that the language of the software screen described in
this manual may differ from the actual language.
This manual consists mainly of explanations of functions of this unit
as hardware. For detailed instructions on operating rekordbox dj, see
the rekordbox software’s manual.
Before start
Features ....................................................................................................... 3
What’s in the box ........................................................................................ 4
About the AC adapter ................................................................................. 4
Additional information
Troubleshooting ........................................................................................ 30
Using as a controller for other DJ software ............................................ 32
About trademarks and registered trademarks
Cautions on copyrights ............................................................................ 34
...................................... 34
Installing rekordbox
Minimum operating environment for rekordbox ..................................... 5
Before installing rekordbox ........................................................................ 5
About the installation procedure .............................................................. 6
Part names and functions
Top panel of unit ......................................................................................... 7
Rear panel ................................................................................................. 12
Front panel ................................................................................................ 12
Connections
Connecting input terminals ..................................................................... 13
Connecting output terminals
.................................................................. 14
Basic Operation
Connections .............................................................................................. 15
Starting the system ................................................................................... 16
Quitting the system .................................................................................. 18
Advanced Operation
Using the performance pads ................................................................... 19
Switching the mixer mode ....................................................................... 22
Using the slip mode .................................................................................. 22
Using the fader start function.................................................................. 23
Calling out a cue point or loop point stored in a track
Analyzing tracks ........................................................................................ 24
Using effects ............................................................................................. 24
Using recording functions ....................................................................... 25
Using external inputs ............................................................................... 26
.......................... 24
Changing the settings
Launching utilities mode ......................................................................... 27
Changing the settings with rekordbox .................................................... 27
About the driver software and setting utility software ........................... 29
En
2
Before start
Features
This unit is a dedicated controller equipped with interfaces for the intuitive operation of various functions of rekordbox dj. The layout of the various
operation interfaces such as “BIGJOG,” “PERFORMANCE PADS,” and “2-CHANNEL MIXER” which embody the design philosophy of Pioneer DJ professional equipment and the tuning implemented to achieve operation optimal for use in combination with rekordbox dj have facilitated high response
performance to allow DJs to perform as they wish. Also, this unit is equipped with dedicated operation interfaces for controlling the “BEAT FX” and
“SEQUENCER” functions so that original arrangements can be added to the music being played back. Furthermore, numerous input and output terminals support a variety of DJ styles. Featuring aluminum material for the top panel, the design makes this unit look high quality, which is appropriate in a
variety of scenes such as events, home parties, etc.
rekordbox
!
rekordbox is a composite software that enables track management and DJ performances.
! rekordbox dj
The DJ performance function of rekordbox is called rekordbox dj. Enter the license key shown on the rekordbox dj license key card included with
this product to use rekordbox dj.
Before start
BIG JOG & ON JOG INDICATOR
This unit is equipped with a “BIG JOG” that is of the optimum size and
operation load for performing fast-forward and fast-reverse operations
manually and playing scratch performances. The jog operation information can be sent to a computer more faithfully with low delay thanks to
the adoption of an HID as the system for communication with rekordbox,
which enables scratch performances with operation that feels even
more like operation with analog records. Furthermore, the “ON JOG
INDICATOR” positioned at the center allows the DJ to instantly know the
deck performance state and mode selection state by lighting colors.
“MULTI-COLOR PERFORMANCE PADS”
“MULTI-COLOR PERFORMANCE PADS”, large rubber pads used to operate functions such as HOT CUE, PAD FX, and SAMPLER, are positioned
at the front of the unit.
Music can be arranged by dynamic actions such as beating and rolling.
Also, each pad has built-in multi-color illumination so you can instantaneously understand the information required for your performance from
the color and lighting state of the pad.
SAMPLER SEQUENCER
The “SEQUENCER” function that enables recording and playing sampler
operation patterns can be intuitively operated from a dedicated operation interface on this unit.
The “SEQUENCER” function and dedicated operation interface can be
used to easily create phrases using sampler sounds. Furthermore, a created phrase can be loaded into a deck by pressing the “LOAD” button.
Loading a phrase into a deck allows arrangements to be added to music
using the various functions of the deck such as scratching and reverse
playback to create music performances with even greater originality.
“BEAT FX” & “RELEASE FX”
BEAT FX which can add an effect linked to the tempo of the track being
played and RELEASE FX which can turn off the music sound so that just
the effect sound is output are operable from dedicated operation interfaces. This facilitates adding a new accent to music and use for effect
sounds when mixing.
FLEXIBLE CONNECTIVITY
Two external input systems and one MIC input system are provided to
connect to DJ players, analog players, etc.
The audio of external equipment can also be mixed. In addition, two
MASTER OUT systems and one BOOTH OUT system are provided to also
enable connections to various PA devices.
NEEDLE SEARCH
Points can be searched for simply by touching the touch pad with a
finger. This makes for intuitive, speedy searching with the sense of
touching the music directly.
PLUG AND PLAY USB PORT
A USB sound card is provided to connect this unit to a computer. All of
the buttons and controls of this unit are set to be linked with “rekordbox
dj” beforehand so that the DJ can begin performances immediately
using “rekordbox dj” without having to make troublesome settings after
simply connecting to a computer with a USB cable.
HIGH SOUND QUALITY
The audio output circuitry uses a low-jitter clock and high performance
DAC to reproduce the original sound faithfully and achieve clear club
sound. In addition, the sound quality technology Pioneer has developed
with its professional series is used to achieve the industry’s highest level
of sound quality for a DJ controller.
PROFESSIONAL QUALITY DESIGN
Aluminum material on the top panel and jog plate provides a sense of
high quality design.
This unit is an essential part of DJ performance in clubs and home party
scenes.
2-CHANNEL MIXER
This unit incorporates “2-CHANNEL MIXER,” which retains the control
panel layout of the Pioneer DJM series, the world standard in DJ mixers.
A master level meter and channel level meter are each placed at the
center of the mixer to allow the DJ to know each level in an instant.
En
3
What’s in the box
! AC adapter
! Power cord
! USB cable
! Warranty (for some regions)
! Operating Instructions (Quick Start Guide)
! rekordbox dj license key card
1 The warranty is included for European region only.
— For the Japanese region, the corresponding information is pro-
vided on the back cover of the “Operating Instructions (Quick
Start Guide)”.
—
For the North American region, the corresponding information is
provided on the last page of both the English and French versions
of the “Operating Instructions (Quick Start Guide)”.
The license key cannot be reissued. Be careful not to lose it.
2
1
2
About the AC adapter
Safety instructions
To ensure your personal safety and to maximize the full operating potential of your unit, read and follow these safety instructions.
Read & Retain Instructions
Read all operating and user information provided with this product.
Cleaning
Use a damp cloth to clean the exterior housing. Avoid using any fluids
including liquid, aerosol or alcohol-based cleaning products.
Water or Moisture
Avoid operating or locating this product near water or other sources of
fluid.
Accessories
Do not place this product on an unstable cart, stand, or table. The product may fall and be seriously damaged.
Ventilation
Do not block or cover this product in use. This unit should not be placed
in a built-in installation unless properly ventilated.
Environment
Avoid placing this product in a location with exposure to large quantities
of dust, high temperatures, high humidity, or subject to excessive vibrations or shocks.
Power Sources
Operate this product only from the recommended power sources. If
you are unsure of the power source, consult an authorized Pioneer
representative.
Power-Cord Protection
When unplugging the unit, pull on the plug – not on the cord. Do not
handle the cord or plug with wet hands; doing so could cause an electric
short or shock. Do not allow anything to pinch or rest on the power cord
and do not place in a walkway.
Power
Turn OFF the system before installing this or any other hardware device.
Overloading
Avoid connecting too many devices to a single wall socket or power
source as this can cause fires or short circuits.
Object & Liquid Entry
Never push inappropriate objects in to the device. Avoid spilling any
liquids in to or on the outside of the drive.
Servicing
Opening or removing the cover exposes you to possible electrical shock
or other danger. Contact a Pioneer authorized service representative for
repairing this product (refer to the enclosed Service & Support Card).
En
4
Damage Requiring Service
Unplug the unit and refer servicing to qualified service personnel in the
following situations:
! When the power cord, plug, or chassis is damaged.
! If liquid has been spilled, or objects have fallen into the product.
! If the product has been exposed to rain or water.
! If the product does not operate normally when the operating instruc-
tions are followed. Adjust only those controls that are covered by the
operating instructions. Improper adjustment of other controls may
result in damage and can require extensive work by a qualified technician to restore the unit to its normal operation.
! When the product exhibits a distinct change in performance – this
indicates a need for service.
If there are irregularities with the AC adapter or power plug, ask your
nearest Pioneer authorized service center or your dealer to carry out
repair work.
Installing rekordbox
rekordbox is a composite software that enables track management and DJ performances.
The DJ performance function of rekordbox is called rekordbox dj. Enter the license key shown on the rekordbox dj license key card included with this
product to use rekordbox dj.
Installing rekordbox
Minimum operating environment for rekordbox
Supported
operating systems
Mac OS X:
10.11/10.10/10.9 (latest
update)
Windows: Windows 10/
Windows 8.1/Windows 7
(latest service pack)
32-bit version, 64-bit
version
Others
USB port
Display resolution Resolution of 1280 x 768 or greater
Internet connection
!
For information on the latest system requirements, compatibility, and supported
operating systems of rekordbox, see [System Requirements] on the rekordbox
product site below.
http://rekordbox.com/
! Operation is not guaranteed on all computers, even if all the required operating
environment conditions indicated here are fulfilled.
! Depending on the computer’s power-saving settings, etc., the CPU and hard
disk may not provide sufficient processing capabilities. For notebook comput-
ers in particular, make sure the computer is in the proper conditions to provide
constant high performance (for example by keeping the AC power connected)
when using rekordbox.
! Use of the Internet requires a separate contract with a provider offering Internet
services and payment of provider fees.
! Use the latest version/service pack of the operating system.
CPU and required memory
®
Intel
processor Core™ i3/i5/i7,
Intel® processor Core™ 2 Duo
4 GB or more of RAM
Intel® processor Core™ i3/i5/i7,
Intel® processor Core™ 2 Duo
4 GB or more of RAM
A USB 2.0 port is required to connect the computer
with this unit.
An Internet connection is required for registering the
rekordbox user account and downloading the software.
Before installing rekordbox
The rekordbox software is not included.
Access the rekordbox.com site and download the software.
http://rekordbox.com/
! The user is responsible for preparing the computer, network
devices and other elements of the Internet usage environment
required for a connection to the Internet.
If you are already using rekordbox 4, rekordbox dj can be used by
!
updating the software to the latest version.
Obtaining the rekordbox software
1 Access the rekordbox product site
https://rekordbox.com/en/store/
! The page content is subject to change without notice.
2 Check the Get Started guide and then click [Free to
Download].
3 Carefully read the Software End User License
Agreement and select the [Agree] check box if you
agree.
When you select the check box, [Download] becomes clickable.
4 Click [Download].
Downloading of rekordbox starts.
Viewing the Operating Instructions of
rekordbox
Various instructions are sometimes provided as files in PDF format.
Adobe® Reader® must be installed in order to view PDF format files.
1 Launch a web browser on the computer and access
the rekordbox product site below.
http://rekordbox.com/
2 Click [Support].
3 Click [Manual].
4 Click the required language of the manual.
Download as necessary.
! For inquiries on rekordbox, see the rekordbox product site indicated
above.
En
5
About the installation procedure
The installation procedure depends on the operating system (OS) on the
computer you are using.
Do not connect this unit and the computer until installation is
completed.
If any other programs are running on the computer, quit them.
!
Installation procedure (Mac OS X)
1 Unzip the downloaded rekordbox software file.
2 Double-click the unzipped software file to launch the
installer.
3 Read the terms of the license agreement carefully,
and if you agree, click [Agree].
3 Read the terms of the license agreement carefully,
and if you agree, select [Agree], then click [Next].
! If you do not agree to the contents of the license agreement, click
[Cancel] to cancel installation.
! After the installation destination is specified, the installation starts.
The message of successful installation appears once installation is
completed.
4 Click [Finish] to quit the rekordbox installer.
! If you do not agree to the contents of the license agreement, click
[Disagree] to quit installation.
4 If the installation completion screen appears, click
[Close] to close the rekordbox installer.
Installation Procedure (Windows)
! Log on as the user which was set as the computer’s administrator
before installing.
1 Unzip the downloaded rekordbox software file.
2 Double-click the unzipped software file to launch the
installer.
En
6
Part names and functions
1 1
2
Top panel of unit
1 Browser section
2 Deck section
3 Mixer section
4 Effect section
Browser section
1 LOAD button
Press:
The selected tracks are loaded to the respective decks.
! When the [LOAD] button is pressed twice, the tracks loaded in
the deck on the opposite side are loaded into the deck on the side
that the [LOAD] button was pressed. When this is done while
a track is playing, the track is played from the same position.
(Instant Double)
[SHIFT] + press:
Sorts the track list when one of the [LOAD] buttons is pressed.
: Sorts by BPM.
: Sorts by artist.
2 Rotary selector
Turn:
The cursor moves vertically.
[SHIFT] + turn:
Enlarges or reduces the enlarged waveform display of rekordbox dj.
Right turn enlarges the waveform display, and left turn reduces it.
Press:
Moves the cursor between the tree view and track list each time the
rotary selector is pressed.
! When the playlist palette is displayed, the cursor moves between
playlists in addition to the tree view and track list.
! The tree view, track list, and playlist palette are in the browse sec-
tion of rekordbox dj. For details on the role of each of them, see
the rekordbox Operating Instructions.
3 4
3 BACK button
Press:
Moves the cursor between the tree view and track list each time the
button is pressed.
When the playlist palette is displayed, the cursor moves between
!
playlists in addition to the tree view and track list.
!
The tree view, track list, and playlist palette are in the browse sec-
tion of rekordbox dj. For details on the role of each of them, see
the rekordbox Operating Instructions.
[SHIFT] + press:
Switches the display of the browse section of rekordbox dj.
4 TAG TRACK button
Press:
Adds tracks to the tag list.
You can temporarily collect the music files to be played in the
!
rekordbox tag list separately from the playlist.
[SHIFT] + press:
Displays the tracks whose BPM and key are similar to those of the
track currently being played as the candidate to be played next on
the screen.
En
Part names and functions
7
Deck section
[
±6%
][
±10%
][
±16%
] [
WIDE
]
This section is used to control the four decks. The buttons and controls
for operating decks 1 and 3 are located on the left side of the controller,
those for operating decks 2 and 4 are located on the right side of the
controller.
1 Jog dial
Turn top:
When the vinyl mode is on, the scratch operation is possible.
Turn outer section:
The pitch bend operation (adjustment of the playing speed) is
possible.
[SHIFT] + Turn top:
Skips the playback position.
2 NEEDLE SEARCH pad
By touching the pad during pause, you can jump to the desired position in the track loaded in the deck.
! It can jump to the desired position during playback depending on
the [Preferences] of rekordbox.
3 TEMPO slider
Use this to adjust the track playing speed.
4 MASTER TEMPO button
Press:
Turns the master tempo function on or off.
! When the master tempo function is on, the key does not change
even when the audio speed is changed with the [TEMPO] slider.
The sound is digitally processed, so the sound quality decreases.
[SHIFT] + press:
The [TEMPO] slider’s range of variation switches each time the button is pressed.
5 AUTO BEAT LOOP button
Press:
Turns the auto beat loop function on and off.
! During loop playback, this operation cancels looping.
[SHIFT] + press:
Switches the loop saved in the track between active and non-active.
(Active Loop)
!
If you press the button while pressing the [SHIFT] button during
playback, the loop set closest to the playback position among the
loops saved in the track will be active.
! If you press the button while pressing the [SHIFT] button when
a loop saved in the track is called out, the loop will be active or
inactive.
6 LOOP 1/2X button
Press:
Selects a beat for auto beat loop.
Halves the loop playback length.
[SHIFT] + press:
During loop playback, moves the loop to the left by the amount equal
to its length. (Loop Move)
7 LOOP 2X button
Press:
Selects a beat for auto beat loop.
Doubles the loop playback length.
[SHIFT] + press:
During loop playback, moves the loop to the right by the amount
equal to its length. (Loop Move)
8 LOOP IN button
Press:
Loop In Point is set.
When this button is pressed during loop playback, the loop in point
can be fine-adjusted using the jog dial.
[SHIFT] + press:
The track returns to the set loop in point and loop playback
continues.
Press for over 1 second:
Turns the auto 4-beat loop on.
9 LOOP OUT button
Press:
The loop out point is set, and loop playback begins.
When this button is pressed during loop playback, the loop out point
can be fine-adjusted using the jog dial.
[SHIFT] + press:
Cancels loop playback. (Loop Exit)
After loop playback is canceled, playback returns to the previously
set loop in point and loop playback resumes. (Reloop)
a LOAD SEQUENCE button
Press:
Loads the currently playing sequence into the deck as a track.
[SHIFT] + press:
Turns the quantize function on.
For example, when the quantize function is turned on, the point is
automatically set to the nearest beat position when a hot cue is set.
The resolution of the quantized beat can be selected in the
!
[Preferences] of rekordbox.
b CAPTURE button
Press a performance pad while pressing the [CAPTURE] button to
load the active loop to the sampler slot.
[SHIFT] + press:
Loads the sections in the target area of slicer or slicer loop to separate sampler slots.
!
For details on slicer and slicer loop, see Using the Slicer function
on page 20 and the rekordbox Operating Instructions.
c OVERDUB button
Press:
Turns the sequencer on standby for recording.
8
En
Recording operation information (sequence) is started if the sampler
is operated when the sequencer is on standby for recording. Press
the button again to stop recording.
[SHIFT] + press:
Saves the recorded sequence to the sequencer slot.
d START button
Starts the sequence playback when the sequence recording is
stopped.
Overdubs the new sequence onto the sequence being played back
while recording a sequence.
[SHIFT] + press:
Selects the sequencer slot.
e HOT CUE mode button
Sets the hot cue mode.
[SHIFT] + press:
Sets the beat jump mode.
f PAD FX 1 mode button
Sets the pad FX mode 1.
[SHIFT] + press:
Sets the pad FX mode 2.
g SLICER mode button
Sets the slicer mode.
[SHIFT] + press:
Sets the slicer loop mode.
! To cancel the slicer or slicer loop mode, press the [PAD FX 1]
mode, [SAMPLER] mode or [HOT CUE] mode button.
h SAMPLER mode button
Sets the sampler mode.
[SHIFT] + press:
Sets the sequence call mode.
i Performance pads
Controls the “hot cue”, “pad FX”, “slicer”, “sampler” and other
functions.
= Using the performance pads (p. 19 )
j PARAMETERc button, PARAMETERd button
Sets parameters for the “pad FX”, “slicer”, “sampler” and other
functions.
= Using the performance pads (p. 19 )
k PLAY/PAUSE f button
Use this to play/pause tracks.
l CUE button
Press:
Sets, plays and calls out cue points.
! When the [CUE] button is pressed during pause, the cue point is
set.
! When the [CUE] button is pressed during playback, the track
returns to the cue point and pauses. (Back Cue)
! When the [CUE] button is pressed and held after the track
returns to the cue point, playback continues as long as the button is pressed. (Cue Sampler)
! When the [PLAY/PAUSE f] button is pressed during Cue
Sampler, playback continues from that point.
[SHIFT] + press:
Returns the playback position to the beginning of the track.
m SYNC button
Press:
Synchronizes with the tempos (pitches) and beat grids of the deck
set as the master for synchronization automatically.
[SHIFT] + press:
Sets the deck whose button is pressed as the master deck for
synchronization.
n SHIFT button
When another button is pressed while pressing the [SHIFT] button, a
different function is called out.
o GRID ADJUST button
When the jog dial is turned while pressing the [GRID ADJUST] button, the beat grid interval can be adjusted.
[SHIFT] + press:
The BPM value is divided by 1/2 (doubling the beat grid’s spacing).
p GRID SLIDE button
When the jog dial is turned while pressing the [GRID SLIDE] button,
the overall beat grid can be slid to the left or right.
[SHIFT] + press:
The BPM value is multiplied by 2 (reducing the beat grid’s spacing
by 1/2).
q SLIP button
Turns the slip mode on and off.
= Using the slip mode (p. 22 )
[SHIFT] + press:
Turns the vinyl mode on and off.
r SLIP REVERSE button
Press:
(During normal operation)
Plays the track in the reverse direction while the [SLIP REVERSE]
button is pressed, and resumes normal playback when the button is
released.
Slip reverse play is automatically canceled after 8 beats have elapsed
even if the [SLIP REVERSE] button is kept pressed. The playback
returns to normal after reverting to the background.
(During standby status)
The standby mode is canceled.
! This is limited to the button on the left deck side.
[SHIFT] + press:
Starts reverse playback. When the [SHIFT] and [SLIP REVERSE]
buttons are pressed again, reverse playback is canceled and normal
playback resumes.
s PANEL button
Displays or hides each panel of rekordbox.
Part names and functions
En
9
1
2
5
3
6
8
7
4
a
Mixer section
9
b
c
f
d
e
1 INPUT SELECT switch
Selects the input source of each channel from the components connected to this unit.
! [DECK1-4]: Select this to use the track loaded in the rekordbox
deck.
[PHONO/LINE]: Select this to use a line level output device (DJ
!
player, etc.) connected to the [PHONO/LINE] input terminals on
the rear panel.
2 TRIM control
Adjusts the individual channel output gain.
3 EQ (HI, MID, LOW) controls
Boosts or cuts frequencies for the different channels.
4 Channel Level Indicator
Displays the sound level of the respective channels before passing
through the channel faders.
5 FILTER control
Applies the filter effect for the respective channel.
The original sound is output when the control is at the center
position.
Turn counterclockwise: Gradually descends the low-pass filter’s cutoff frequency.
Turn clockwise: Gradually rises the high-pass filter’s cutoff
frequency.
6 Headphones CUE button
Press:
The sound of channels for which the headphones [CUE] button is
pressed is output to the headphones.
! When the headphones [CUE] button is pressed again, monitor
output is canceled.
[SHIFT] + press:
The track’s tempo can be set by tapping the button. (Tap function)
7 Channel fader
Move:
Adjusts the level of audio signals output in each channel.
[SHIFT] + move:
Use the channel fader start function.
= Using the channel fader start function (p. 23 )
En
10
1
2
3
5
6
7
4
8 Crossfader
Outputs the sound assigned with the crossfader assign switch.
[SHIFT] + move:
Uses the crossfader start function.
= Using the crossfader start function (p. 23 )
9 MASTER LEVEL control
Adjusts the master sound level output.
a Master level indicator
Displays the master output’s audio level.
b Booth monitor level control
Adjusts the audio level output from the [BOOTH] output terminal.
c HEADPHONES MIXING control
Adjusts the balance of the monitor volume between the sound of the
channels for which the headphones [CUE] button is pressed and the
sound of the master channel.
d SAMPLER SYNC button
Synchronizes the sampler deck’s tempo with the master
deck’s tempo.
! Only a sampler slot with the PLAY mode set to [Loop] synchro-
nizes the tempo with the master deck’s tempo.
[SHIFT] + press:
Sets the sampler deck as the master for synchronization.
e SAMPLER CUE button
Turns monitoring of the sampler deck’s sound on or off.
[SHIFT] + press:
Sets the sampler deck’s tempo by tapping the button.
! Only a sampler slot with the PLAY mode set to [Loop] will be the
same tempo as the BPM value on the sampler panel.
f SAMPLER VOLUME control
Adjusts the sampler’s overall sound level.
Effect section
1 1 1 2
3 3 3 4 5
1
The effect units consist of beat FX and release FX.
This section is used to control the two effect units (FX1 and FX2). There
are controls and buttons for operating FX1 on the left side of the controller and FX2 on the right side of the controller. Furthermore, which
channel to apply an effect can be set by the effect assign buttons in
rekordbox.
! For details, see the rekordbox Operating Instructions.
1 Effect parameter controls
Adjusts the beat FX parameter.
2 RELEASE FX control
Turn:
Switches the types of release FX.
Press:
The release FX is on while the control is pressed.
! If the release FX turns on, the beat FX in the same effect unit
turns off.
[SHIFT] + turn:
Adjusts the beat FX time parameter.
[SHIFT] + press:
Switches the beat FX mode.
3 Effect parameter buttons
Press:
Turns the beat FX on and off or switches the parameters.
[SHIFT] + press:
Switches the types of beat FX.
4 BEATc button
Decreases the beat fraction for synchronizing the beat FX effect
sound each time the button is pressed.
[SHIFT] + press:
Sets the beat FX tempo mode to the BPM auto mode. The
track’s BPM value is used as the basis for the effect’s tempo.
5 BEATd button
Increases the beat fraction for synchronizing the beat FX effect
sound each time the button is pressed.
[SHIFT] + press:
Sets the beat FX tempo mode to the BPM tap mode. The BPM value
used as the basis for beat FX is calculated by the interval at which
the button is tapped.
Jog dial display section
Part names and functions
1 ON JOG INDICATOR
The display items can be changed on the [Deck] tab in [Preferences]
of rekordbox.
The following settings are available.
Deck selection indication:
The deck selected with the [INPUT SELECT] switch is indicated by the
lighting color of the jog.
— Lit in blue: When [DECK1] or [DECK2] is selected
— Lit in white: When [DECK3] or [DECK4] is selected
— Off: When [PHONO/LINE] is selected
Hot Cue Countdown indication:
The jog lights when become near the hot cue position set for the
track being played.
The lighting color is the color set for the hot cue.
Sync indication:
The jog lights according to the SYNC setting of the deck.
— Lit in orange: When the deck is MASTER
— Lit in white: When the deck is SYNC
— Off: When the deck is neither MASTER nor SYNC
Slip mode indication:
The jog lights according to the slip mode state.
— Flashing in red: When the slip mode is on and slip playback
— Lit in red: When the slip mode is on and not slip playback
— Off: When the slip mode is off
On Air indication:
The jog lights according to the On Air state.
— Lit in red: When On Air state
— Off: When not On Air state
Vinyl indication:
The jog lights according to the [VINYL] mode state.
— Lit in blue: When the [VINYL] mode is on
— Off: When the [VINYL] mode is off
En
11
Loading...