Pioneer DDJ-1000SRT Quick Start Guide
Operating Instructions (Quick Start Guide)
DJ Controller
DDJ-1000SRT
pioneerdj.com/support/
http://serato.com/
For FAQs and other support information for this product, visit the above websites.
IMPORTANT
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
Read these instructions.
1)
Keep these instructions.
2)
Heed all warnings.
3)
Follow all instructions.
4)
Do not use this apparatus near water.
5)
Clean only with dry cloth.
6)
Do not block any ventilation openings. Install in
7)
accordance with the manufacturer’s
instructions.
Do not install near any heat sources such as
8)
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
9)
blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or
pinched particularly at plugs, convenience
10)
receptacles, and the point where they exit from
the apparatus.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Only use attachments/accessories specified by
11)
the manufacturer.
Use only with the cart, stand, tripod, bracket, or
12)
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
Unplug this apparatus during lightning storms
13)
or when unused for long periods of time.
Refer all servicing to qualified service personnel.
14)
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
D3-4-2-1-1b_A1_En
D3-7-13-69_En
WARNING
This equipment is not waterproof. To prevent a fire or
shock hazard, do not place any container filled with
liquid near this equipment (such as a vase or flower
pot) or expose it to dripping, splashing, rain or
moisture.
D3-4-2-1-3_A1_En
WARNING
To prevent a fire hazard, do not place any naked flame
sources (such as a lighted candle) on the equipment.
D3-4-2-1-7a_A1_En
VENTILATION CAUTION
When installing this unit, make sure to leave space
around the unit for ventilation to improve heat radiation
(at least 5 cm at rear and 5 cm at each side).
D3-4-2-1-7d*_A1_En
En2En
CAUTION
The switch on this unit will not completely shut off
all power from the AC outlet. Since the power cord
serves as the main disconnect device for the unit,
you will need to unplug it from the AC outlet to shut
down all power. Therefore, make sure the unit has
been installed so that the power cord can be easily
unplugged from the AC outlet in case of an accident.
To avoid fire hazard, the power cord should also be
unplugged from the AC outlet when left unused for a
long period of time (for example, when on vacation).
D3-4-2-2-2a*_A1_En
Operating Environment
Operating environment temperature and humidity:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or
strong artificial light). D3-4-2-1-7c*_A2_En
The graphical symbol placed on the product
means alternating current.
The graphical symbol placed on the product
means direct current.
The graphical symbol placed on the product
means Class II equipment.
D3-8-2-4_A1_En
When using this product, confirm the safety
information shown on the bottom of the unit.
D3-4-2-2-4_B1_En
Information to User
Alterations or modifications carried out without
appropriate authorization may invalidate the user’s
right to operate the equipment.
D8-10-2_A1_En
IMPORTANT NOTICE
THE MODEL NUMBER AND SERIAL NUMBER OF
THIS EQUIPMENT ARE ON THE REAR OR BOTTOM.
RECORD THESE NUMBERS ON PAGE 19 FOR
FUTURE REFERENCE.
D36-AP9-3*_A1_En
The Safety of Your Ears is in Your Hands
Get the most out of your equipment by playing it at a
safe level – a level that lets the sound come through
clearly without annoying blaring or distortion and, most
importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time, your hearing
“comfort level” adapts to higher volumes of sound, so
what sounds “normal” can actually be loud and harmful
to your hearing. Guard against this by setting your
equipment at a safe level BEFORE your hearing adapts.
ESTABLISH A SAFE LEVEL:
• Set your volume control at a low setting.
• Slowly increase the sound until you can hear it
comfortably and clearly, without distortion.
• Once you have established a comfortable sound
level, set the dial and leave it there.
BE SURE TO OBSERVE THE FOLLOWING
GUIDELINES:
• Do not turn up the volume so high that you can’t
hear what’s around you.
• Use caution or temporarily discontinue use in
potentially hazardous situations.
• Do not use headphones while operating a motorized
vehicle; the use of headphones may create a traffic
hazard and is illegal in many areas.
S001a_A1_En
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power cord
when your hands are wet as this could cause a short
circuit or electric shock. Do not place the unit, a piece of
furniture, etc., on the power cord, or pinch the cord. Never
make a knot in the cord or tie it with other cords. The
power cords should be routed such that they are not likely
to be stepped on. A damaged power cord can cause a fire
or give you an electrical shock. Check the power cord once
in a while. When you find it damaged, ask your nearest
service center or your dealer for a replacement.
S002*_A1_En
[Supplied power cord]
The supplied power cord is designed specifically for
120 V. Do not use it with a voltage other than 120 V.
Doing so may cause a fire or electric shock.
D3-7-14_PDJ_A1_En
WARNING
Store small parts out of the reach of children and
infants. If accidentally swallowed, contact a doctor
immediately.
D41-6-4_A1_En
CAUTION
This product is evaluated in moderate climate
condition.
D3-8-2-1-7b_A1_En
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
D8-10-1-2_A1_En
FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Product Name: DJ Controller
Model Number: DDJ-1000SRT
Responsible Party Name: PIONEER ELECTRONICS (USA) INC. SERVICE SUPPORT DIVISION
Address: 2050 W, 190th Street, Suite 100, Torrance, CA 90504, U.S.A
Phone: 1-310-952-2915
URL: pioneerelectronics.com
D8-10-4*_C1_En
En3En
Contents
How to read this manual
Thank you for choosing this Pioneer DJ product.
! This manual briefly explains procedures from connecting the unit to
your PC/Mac, through to outputting sound. For more details on how
to use the unit, refer to the “Operating Instructions” on the Pioneer
DJ website.
Be sure to read the “IMPORTANT SAFETY INSTRUCTIONS” and
keep this manual together with the Warranty on page 19.
! Please note that the screens and specifications of the software, as
well as the external appearance and specifications of the hardware,
were still under development at the time this manual was created
and may differ from the final specifications.
! Please note that, depending on the operating system version, web
browser settings etc., operation may differ from the ways shown in
this manual.
! Please note that the language on the screens of the software
described in this manual may differ from the language on your
screen.
This manual provides brief descriptions regarding the names of parts
on the unit and the connections between the unit and peripherals.
For more detailed instructions on using the unit, see its “Operating
Instructions.”
! For details on how to find “Operating Instructions” for the unit, see
“Viewing the Operating Instructions” (page 5).
Before you start ........................................................ 5
Features ............................................................................................. 5
What’s in the box ............................................................................... 5
Acquiring the manual ....................................................................... 5
Installing the software ...................................................................... 5
Part names ................................................................ 8
Browser section ................................................................................ 8
Deck section ...................................................................................... 9
Mixer section ................................................................................... 10
Rear panel ........................................................................................ 11
Front panel ....................................................................................... 11
Operation ................................................................. 12
Connection examples ..................................................................... 12
Connecting .............................................................. 14
Launching the system ............................................ 15
Changing the settings .................................................................... 17
Quitting the system ......................................................................... 17
Additional information ........................................... 18
Troubleshooting .............................................................................. 18
About trademarks and registered trademarks ............................. 18
Cautions on copyrights .................................................................. 18
Specifications .................................................................................. 18
En4En
Before you start
Before you start
Features
This unit is an all-in-one DJ controller designed specifically for use with
Serato Limited’s DJ software, Serato DJ Pro.
Controls such as ‘BIG JOG’, ‘PERFORMANCE PADS’ and
‘4-CHANNEL MIXER’ are arranged in a way to enable comfortable
control of functions in Serato DJ Pro.
The unit also has multiple input/output terminals suitable for various
setups and styles of DJ performance, and it’s designed with the quality
needed for use at clubs and house parties.
What’s in the box
! AC adapter
! Power plug
! USB cable
! Operating Instructions (Quick Start Guide) – this manual
! Serato DJ Pro Expansion Pack Voucher
1
Only one USB cable is supplied with the unit. If you want to use two,
use a cable that supports USB 2.0.
2
Please note that the Serato DJ Pro Expansion Pack Voucher can’t
be reissued. You’ll need to use the voucher code to activate the
expansion pack. Be sure to store it in a safe place.
1
2
Acquiring the manual
Various instruction manuals are provided as PDF files.
You need to have Adobe® Reader® installed to view PDF files.
Viewing the Operating Instructions
1 Launch a web browser on your PC/Mac and visit the
Pioneer DJ website.
pioneerdj.com
! To select your language, click the flag icon in the top-right
corner of the screen.
2 Hover the cursor over [Support].
3 Click [Tutorials, manuals & documentation].
4 Click [DDJ-1000SRT] under [DJ CONTROLLER].
5 Select the language you need.
Download the manual if you want to.
Downloading the Serato DJ Pro software
manual
1 Visit the Serato website.
http://serato.com/
2 Click [Serato DJ Pro] in the [Products] menu.
3 Click [Download].
4 Click [Manuals and downloads].
5 Click the Serato DJ Pro software manual in the language
you need.
Installing the software
Before you install the software
The Serato DJ Pro software and driver software are not included with
the unit.
Access and download the software from the Pioneer DJ support
page.
pioneerdj.com/support/
! You are responsible for preparing your PC/Mac, network devices,
and other elements needed to connect to the internet.
Downloading the driver software
1 Launch a web browser on your PC/Mac and visit the
Pioneer DJ website.
pioneerdj.com
! To select your language, click the flag icon in the top-right
corner of the screen.
2 Hover the cursor over [Support].
3 Click [Software & firmware updates].
4 Click [DDJ-1000SRT] under [DJ CONTROLLER].
5 Click [Drivers].
6 Click [Download link], then save the file.
About the Serato DJ Pro software
Serato DJ Pro is a DJ software application made by Serato Limited.
DJ performances are enabled by connecting the unit to your PC/Mac
with the software installed.
Minimum computer requirements
Supported operating systems CPU and memory required
Mac: macOS Mojave 10.14/macOS
High Sierra 10.13/macOS Sierra 10.12
(latest update)
®
10 / Windows® 8.1 /
Windows
Windows® 7 (latest service pack)
! 32-bit operating systems not supported.
Others
USB port
Display resolution Resolution of 1280 × 720 or greater
Internet connection
! For information on the latest system requirements, compatibility, and supported
operating systems of Serato DJ Pro, see the site below.
https://serato.com/dj/pro/downloads
! Be sure to use the latest version and latest service pack for your operating
system.
! Operation is not guaranteed on all PC/Mac models, even if the system
requirements are met.
Your PC/Mac must have a USB 2.0 port to connect
with the unit.
You’ll need an internet connection to register your
user account at Serato.com and to download the
software.
®
Intel
processor Core™ i3, i5, i7 and i9
1.07 GHz or better
4 GB or more of RAM
®
Intel
processor Core™ i3, i5, i7 and i9
1.07 GHz or better
4 GB or more of RAM
En
5
! Depending on power-saving settings and other conditions of the PC/Mac, the
CPU and hard disk may not provide sufficient processing capabilities. For
laptops in particular, make sure the PC/Mac is in the best condition to provide
constant high-level performance when using Serato DJ Pro (e.g. by keeping
the AC power connected).
! To use the internet, you need a separate contract with an internet service
provider, which you may have to pay for.
Downloading the Serato DJ Pro software
1 Visit the Serato website.
http://serato.com/
2 Click [Serato DJ Pro] under [Products].
The Serato DJ Pro download page is displayed.
! The download page is subject to change.
3 Click [DOWNLOAD v*.*].
4 Create a Serato.com user account.
! If you’ve already registered an account, skip to step 6.
! If you haven’t finished registering your account, follow the steps
below.
— Following the instructions on the screen, enter your email
address and create a password, then select the region
where you live.
— If you check [Go backstage with Serato], you’ll receive
newsletters with the latest information on Serato Limited
products.
— Once you’ve finished registering your user account, you’ll
receive an email. Check the contents of the email.
! Be careful not to forget the email address and password you
used to register. You’ll need them to update the software in
future.
! The personal information you entered when registering your
user account may be collected, processed, and used based on
the privacy policy on the Serato Limited website.
5 Click the link in the email you received from Serato.com.
This takes you to the Serato DJ Pro download page.
6 Log in.
Enter the email address and password you registered to log in to
Serato.com.
7 Select [A laptop with a supported controller, mixer or
interface] on the download page, and click [DOWNLOAD
SERATO DJ PRO] to download the software.
8 Click [Install].
9 Follow the on-screen instructions to install.
10 Click [Close] to quit the installer.
Installation procedure (Windows)
Do not connect the unit to your PC until installation is complete.
! Log in to the administrator account on your PC before starting
installation.
! Quit any other programs that are running.
1 Unzip the downloaded driver software
(DDJ1000SRTXXXXexe.zip).
2 Double-click [DDJ-1000SRT_X.XXX.exe].
3 Follow the on-screen instructions to install.
If [Windows Security] appears on the screen during installation,
click [Install this driver software anyway] and continue with the
installation.
When the installation program is finished, a completion message
appears.
After installing the driver software, install the Serato DJ Pro software.
4 Unzip the downloaded Serato DJ Pro software file.
5 Double-click the unzipped software file to launch the
installer.
6 Read the terms of the license agreement carefully, and
if you agree, select [I agree to the license terms and
conditions], then click [Install].
! If you don’t agree to the contents of the license agreement, click
[Close] to cancel installation.
A message indicating successful installation appears when installation
is complete.
7 Click [Close] to quit the Serato DJ Pro installer.
Installation procedure (Mac)
Do not connect the unit to your Mac until installation is complete.
! Quit any other programs that are running on your Mac.
1 Unzip the downloaded driver software
(DDJ1000SRTXXXdmg.zip).
2 Double-click [DDJ-1000SRT_M_X.X.X.dmg].
3 Double-click [DDJ-1000SRT_AudioDriver.pkg].
4 Follow the on-screen instructions to install.
5 Unzip the downloaded Serato DJ Pro software file.
6 Double-click the unzipped software file to launch the
installer.
7 Read the terms of the license agreement carefully, and if
you agree, click [Agree].
! If you don’t agree to the contents of the license agreement, click
[Disagree] to cancel installation.
En
6
Loading...