Pioneer 291320-10-PIO-K User Manual
• VW Caddy (Type 2K)
Installation Manual
Double DIN Kit 291320-10-PIO-K
• VW Golf V
• VW Golf VI
• VW Passat (Type 3C)
Compatible with these Pioneer double DIN devices
Pioneer Navigation
1
• VW Passat CC
• VW Scirocco III
• VW Touran
2
4 x
© 2008 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.
Double DIN Kit contents:
• (1) Facia Plate
• (2) Metal Brackets • (3) Fixing Screws
3
4 x
Installation Manual Double DIN Kit 291320-10-PIO-K
VW Golf V only:
VW Golf V only
Pull up the aircone unit (fixed by clips).
Remove two Torx (TX20) screws
(see arrows) which become visible.
1. Remove the original trim
frame, surrounding the radio
(fixed by clips).
2. Remove the 4 Torx (TX20) screws
(These screws will be used again
later).
4. Mount both metal brackets at the
facia plate as shown in the sample
picture on the left.
5. Push the Pioneer Double DIN
head unit into the facia plate and
fix the sides of the head unit with
2 screws on each side.
6. Connect all wires and fix the Pioneer Double DIN head unit with
the original Torx (TX20) screws.
Remove the OEM head unit.
All installation work must be performed by a qualified professional installer only.
The manufacturer / dealer is not liable for any kind of incidential or indirect damages.
7. Reinstall everything in reverse
order to finish installation.
Loading...