Philips tda8762a DATASHEETS
INTEGRATED CIRCUITS
DATA SH EET
TDA8762A
10-bit high-speed low-power
analog-to-digital converter
Product specification
Supersedes data of 1995 April 27
File under Integrated Circuits, IC02
1996 Mar 21
Philips Semiconductors Product specification
10-bit high-speed low-power
analog-to-digital converter
FEATURES
• 10-bit resolution
• Sampling rate up to 80 MHz
• DC sampling allowed
• One clock cycle conversion only
• High signal-to-noise ratio over a large analog input
frequency range (9.3 effective bits at 4.43 MHz
full-scale input at f
• No missing codes guaranteed
• In range (IR) TTL output
• TTL compatible digital inputs and outputs
• Low-level AC clock input signal allowed
• External reference voltage regulator
• Power dissipation only 380 mW (typical)
• Low analog input capacitance, no buffer amplifier
required
• No sample-and-hold circuit required.
= 80 MHz)
clk
TDA8762A
APPLICATIONS
High-speed analog-to-digital conversion for:
• Video data digitizing
• Radar pulse analysis
• Transient signal analysis
• High energy physics research
•Σ∆ modulators
• Medical imaging.
GENERAL DESCRIPTION
The TDA8762A is a 10-bit high-speed analog-to-digital
converter (ADC) for professional video and other
applications. It converts the analog input signal into 10-bit
binary-coded digital words at a maximum sampling rate of
80 MHz. All digital inputs and outputs are TTL compatible,
although a low-level sine wave clock input signal is
allowed.
QUICK REFERENCE DATA
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
V
CCA
V
CCD
V
CCO
I
CCA
I
CCD
I
CCO
INL integral non-linearity f
DNL differential non-linearity f
f
clk(max)
analog supply voltage 4.75 5.0 5.25 V
digital supply voltage 4.75 5.0 5.25 V
output stages supply voltage 4.4 5.0 5.25 V
analog supply current − 29 36 mA
digital supply current − 24 30 mA
output stages supply current CL= 15 pF; ramp input − 23 30 mA
= 80 MHz; ramp input −±0.75 ±1.5 LSB
clk
= 80 MHz; ramp input −±0.3 ±0.7 LSB
clk
maximum clock frequency
TDA8762AM/6 60 −−MHz
TDA8762AM/8 80 −−MHz
P
tot
total power dissipation − 380 500 mW
ORDERING INFORMATION
TYPE
NUMBER
TDA8762AM/6 SSOP28
TDA8762AM/8 SSOP28 SOT341-1 80
NAME DESCRIPTION VERSION
plastic shrink small outline package; 28 leads;
body width 5.3 mm
PACKAGE
SAMPLING
FREQUENCY (MHz)
SOT341-1 60
1996 Mar 21 2
Philips Semiconductors Product specification
10-bit high-speed low-power
analog-to-digital converter
BLOCK DIAGRAM
handbook, full pagewidth
analog
voltage input
V
RT
V
V
RM
V
RB
V
CCA
3
9
R
LAD
I
8
7
6
ANALOG -TO - DIGITAL
CONVERTER
CLK
1
CLOCK DRIVER
IN RANGE LATCH
V
CCD
11
TDA8762A
TTL OUTPUTSLATCHES
OE
10
TTL OUTPUT
TDA8762A
2
TC
25
D9
D8
24
D7
23
D6
22
D5
21
20 D4
19
D3
18
D2
17 D1
16 D0
V
CCO1
13
28
V
CCO2
26
IR
output
MSB
data outputs
LSB
4
AGND1
analog grounds digital ground
5
AGND2
12
DGND
Fig.1 Block diagram.
1996 Mar 21 3
14
OGND1
output grounds
27
OGND2
MBE560
Philips Semiconductors Product specification
10-bit high-speed low-power
analog-to-digital converter
PINNING
SYMBOL PIN DESCRIPTION
CLK 1 clock input
TC 2 two’s complement input (active LOW)
V
CCA
AGND1 4 analog ground 1
AGND2 5 analog ground 2
V
RB
V
RM
V
I
V
RT
OE 10 output enable input
V
CCD
DGND 12 digital ground
V
CCO1
OGND1 14 output ground 1
n.c. 15 not connected
D0 16 data output; bit 0 (LSB)
D1 17 data output; bit 1
D2 18 data output; bit 2
D3 19 data output; bit 3
D4 20 data output; bit 4
D5 21 data output; bit 5
D6 22 data output; bit 6
D7 23 data output; bit 7
D8 24 data output; bit 8
D9 25 data output; bit 9 (MSB)
IR 26 in range data output
OGND2 27 output ground 2
V
CCO2
3 analog supply voltage (5 V)
6 reference voltage BOTTOM input
7 reference voltage MIDDLE
8 analog input voltage
9 reference voltage TOP input
(TTL level input, active LOW)
11 digital supply voltage (5 V)
13 supply voltage for output stages 1
(5 V)
28 supply voltage for output stages 2
(5 V)
handbook, halfpage
1
CLK
2
TC
V
3
CCA
V
RB
V
RM
V
RT
OE
V
CCD
DGND
CCO1
V
I
4
5
6
7
TDA8762A
8
9
10
11
12
13
AGND1
AGND2
V
OGND1
Fig.2 Pin configuration.
MBE561
TDA8762A
V
28
CCO2
27
OGND2
IR
26
25
D9
24
D8
23
D7
22
D6
D5
21
20
D4
D3
19
18
D2
17
D1
16
D0
1514
n.c.
1996 Mar 21 4
Philips Semiconductors Product specification
10-bit high-speed low-power
TDA8762A
analog-to-digital converter
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 134).
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
V
CCA
V
CCD
V
CCO
∆V
V
I
V
clk(p-p)
I
O
T
stg
T
amb
T
j
CC
analog supply voltage note 1 −0.3 +7.0 V
digital supply voltage note 1 −0.3 +7.0 V
output stages supply voltage note 1 −0.3 +7.0 V
supply voltage difference
V
V
V
CCA
CCA
CCD
− V
− V
− V
CCD
CCO
CCO
−1.0 +1.0 V
−1.0 +1.0 V
−1.0 +1.0 V
input voltage referenced to AGND −0.3 +7.0 V
AC input voltage for switching
referenced to DGND − V
CCD
(peak-to-peak value)
output current − 10 mA
storage temperature −55 +150 °C
operating ambient temperature 0 +70 °C
junction temperature − +150 °C
V
Note
1. The supply voltages V
CCA
CCD
and V
may have any value between −0.3 and +7.0 V provided that the supply
CCO
, V
voltage differences ∆VCC are respected.
HANDLING
Inputs and outputs are protected against electrostatic discharges in normal handling. However, to be totally safe, it is
desirable to take normal precautions appropriate to handling integrated circuits.
THERMAL CHARACTERISTICS
SYMBOL PARAMETER VALUE UNIT
R
th j-a
thermal resistance from junction to ambient in free air 110 K/W
1996 Mar 21 5
Philips Semiconductors Product specification
10-bit high-speed low-power
TDA8762A
analog-to-digital converter
CHARACTERISTICS
V
CCA=V3
V27= 4.4 to 5.25 V; AGND and DGND shorted together; T
V
CCA=VCCD=VCCO
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
Supply
V
CCA
V
CCD
V
CCO
∆V
I
CCA
I
CCD
I
CCO
Inputs
to V4and V5= 4.75 to 5.25 V; V
=5V; V
analog supply voltage 4.75 5.0 5.25 V
digital supply voltage 4.75 5.0 5.25 V
output stages supply voltage 4.4 5.0 5.25 V
CC
voltage difference
V
− V
V
V
CCA
CCA
CCD
− V
− V
CCD
CCO
CCO
analog supply current − 29 36 mA
digital supply current − 24 30 mA
output stages supply current CL= 15 pF; ramp input − 23 30 mA
CCD=V11
= 2.0 V; CL= 15 pF and T
I(p-p)
to V12= 4.75 to 5.25 V; V
= 0 to +70 °C; typical values measured at
amb
=25°C; unless otherwise specified.
amb
CCO=V13
and V28to V14 and
−0.25 − +0.25 V
−0.4 − +0.4 V
−0.4 − +0.4 V
LOCK INPUT CLK (REFERENCED TO DGND); note 1
C
V
IL
V
IH
I
IL
I
IH
Z
I
C
I
LOW level input voltage 0 − 0.8 V
HIGH level input voltage 2.0 − V
LOW level input current V
HIGH level input current V
input impedance f
input capacitance f
= 0.4 V −10 +1 µA
clk
= 2.7 V −−20 µA
clk
= 80 MHz − 2 − kΩ
clk
= 80 MHz − 2 − pF
clk
INPUTS OE AND TC (REFERENCED TO DGND); see Table 2
V
IL
V
IH
I
IL
I
IH
LOW level input voltage 0 − 0.8 V
HIGH level input voltage 2.0 − V
LOW level input current VIL= 0.4 V −400 −− µA
HIGH level input current VIH= 2.7 V −−20 µA
VI(ANALOG INPUT VOLTAGE REFERENCED TO AGND)
I
IL
I
IH
Z
I
C
I
LOW level input current VI= 1.3 V − 0 −µA
HIGH level input current VI= 3.8 V − 70 −µA
input impedance fi= 4.43 MHz − 5 − kΩ
input capacitance fi= 4.43 MHz − 8 − pF
CCD
CCD
V
V
1996 Mar 21 6
Philips Semiconductors Product specification
10-bit high-speed low-power
TDA8762A
analog-to-digital converter
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
Reference voltages for the resistor ladder; see Table 1
V
RB
V
RT
V
diff
I
ref
R
LAD
TC
RLAD
V
osB
V
osT
V
I(p-p)
Outputs
D
IGITAL OUTPUTS D9 TO D0 AND IR (REFERENCED TO OGND)
V
OL
V
OH
I
OZ
Switching characteristics
reference voltage BOTTOM 1.2 1.3 − V
reference voltage TOP − 3.8 V
differential reference voltage
VRT− V
RB
1.8 2.5 3.0 V
CCA
− 0.8 V V
reference current − 28 − mA
resistor ladder − 90 −Ω
temperature coefficient of the
resistor ladder
− 1860 − ppm
167 mΩ/K
offset voltage BOTTOM note 2 − 220 − mV
offset voltage TOP note 2 − 220 − mV
analog input voltage
note 3 1.5 2.06 2.5 V
(peak-to-peak value)
LOW level output voltage IO= 1 mA 0 − 0.4 V
HIGH level output voltage IO= 0 mA 2.7 − V
I
= −0.4 mA 2.7 − V
O
I
= −1 mA 2.4 − V
O
output current in 3-state mode 0.4 V < VO<V
CCO
−20 − +20 µA
CCO
CCO
CCO
− 0.5 V
− 1.3 V
− 1.4 V
LOCK INPUT CLK; see Fig.4; note 1
C
f
clk(max)
maximum clock frequency
TDA8762A/6 60 −− MHz
TDA8762A/8 80 −− MHz
t
CPH
t
CPL
clock pulse width HIGH 5 −− ns
clock pulse width LOW 5 −− ns
Analog signal processing
L
INEARITY
INL integral non-linearity f
DNL differential non-linearity f
= 80 MHz; ramp input −±0.75 ±1.5 LSB
clk
= 80 MHz; ramp input −±0.3 ±0.7 LSB
clk
OFER offset error middle code; V
VRT= 3.8 V
GER gain error (from device to device) V
= 1.3 V; VRT= 3.8 V;
RB
note 4
RB
= 1.3 V;
−±1− LSB
−±0.1 − %
1996 Mar 21 7
Philips Semiconductors Product specification
10-bit high-speed low-power
TDA8762A
analog-to-digital converter
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
BANDWIDTH (f
B analog bandwidth full-scale sine wave; note 5 − 40 − MHz
t
STLH
t
STHL
HARMONICS (f
h
1
h
all
THD total harmonic distortion f
SIGNAL-TO-NOISE RATIO; see Fig.8; note 7
S/N signal-to-noise ratio (full scale) without harmonics;
EFFECTIVE BITS; see Figs 7, 8 and 9; note 7
EB effective bits
TWO-TONE; note 8
TTIR two-tone intermodulation rejection f
BIT ERROR RATE
BER bit error rate f
= 80 MHz)
clk
75% full-scale sine wave;
− 55 − MHz
note 5
small signal at mid-scale;
= ±10 LSB at code 512;
V
I
− 700 − MHz
note 5
analog input settling time
LOW-to-HIGH
analog input settling time
HIGH-to-LOW
=80MHZ)
clk
full-scale square wave;
see Fig.6; note 6
full-scale square wave;
see Fig.6; note 6
− 2.0 3 ns
− 2.5 3.5 ns
fundamental harmonics (full scale) fi= 4.43 MHz −−0dB
harmonics (full scale);
fi= 4.43 MHz
all components
second harmonics −−70 62 dB
third harmonics −−75 67 dB
= 4.43 MHz −−68 − dB
i
56 58 − dB
f
= 80 MHz;
clk
fi= 4.43 MHz
TDA8762AM/6 f
TDA8762AM/8 f
= 60 MHz
clk
f
= 4.43 MHz − 9.35 − bits
i
f
= 10 MHz − 9.0 − bits
i
= 20 MHz − 8.1 − bits
f
i
= 80 MHz
clk
f
= 4.43 MHz − 9.3 − bits
i
f
= 10 MHz − 8.9 − bits
i
f
= 20 MHz − 8.0 − bits
i
= 80 MHz −−68 − dB
clk
= 80 MHz;
clk
− 10
−13
− times/
fi= 4.43 MHz;
sample
VI= ±16 LSB at code 512
1996 Mar 21 8
Loading...