Philips SPE2015, SPE2010, SPE2020, SPE2000, SPE2005 User Manual

External hard disk SPE2000

SPE2005 SPE2010 SPE2015 SPE2020

User manual 3

Brugervejledning 9

4 What’s in the box? 5 How to connect this external hard disk to

your computer? 5 How to safely disconnect? 6 How to install for Mac 7 Warranty, Environment and Safety 8 Specifications

Contents

Important note

When the computer does not recognize the hard disk (some computers

provide insufficient bus power),we advise you to use the USB power cable supplied together with this product. For instructions and more information, see page 5.

How to find warranty information?

Browse to the Philips warranty folder on the hard disk or look on www.philips.com/welcome

What’s in the box?

A: External hard disk B: Mini USB cable

Welcome/Bienvenue

Quick Start Guide Guide de démarrage

External hard disk

Disque dur externe

Connect Connexion

Enjoy Apprécier

SPE2000 SPE2005 SPE2010 SPE2015 SPE2020

C: Quick Start Guide D: USB power cable

How to connect this external hard disk on your system?

Connect the USB cable to the hard disk, and to an empty USB port of the computer. A drive icon, Philips External Hard Disk, appears in Windows Explorer and the blue light should light up. (The computer sometimes needs to be restarted, before you can use the new hardware).

When Windows does not recognize the hard disk (some PCs or laptops provide insufficient bus power on one USB port), plug the additional USB power cable (D) into an empty USB port of your computer.

How to safely disconnect?

1 Double-click the Safely Remove Hardware icon

in the system tray in the lower right part of the screen.

2 In the window that appears, select the name of the device that is to be removed,

then click the Stop button.

3 When the Stop a hardware device screen appears, check that the correct

information is displayed,and then click the OK button.

4 When the message Safe to remove hardware appears, remove the drive from

the computer’s USB port.

+ 11 hidden pages