Philips SLV4200, SLV4200-12 User Manual

www.philips.com/welcome

SLV4200

EN Wireless TV Link

Table of contents

1Important 4

1.1 Power requirements 4

1.2 Conformity 4

1.3 Recycling and disposal 5

1.4 Electric, Magnetic and Electromagnetic Fields ("EMF") 5

1.5 Installation requirements 6

2 Your Wireless TV link 7

2.1 What’s in the box 7

2.2 Overview of the Wireless TV link 7

3Getting started 9

3.1 Connect transmitter 9

3.2 Install the remote control blaster cord 10

3.3 Connect receiver 10

3.4 Enjoy 11

3.5 Select Source 12

3.6 Remove interference on TV2 12

3.7 Improve the quality of the reception with the antenna 12

4 Technical Data 13

5 Frequently asked questions14

6 Information 16

6.1 Warranty 16

6.2 Glossary 16

7INDEX 17

8 Declaration of Conformity 18

Table of contents 3

1Important

Take time to read this user manual before you use your wireless TV link. It contains important information and notes regarding your wireless TV link.

1.1 Power requirements

• Connect the power adapters only to a

100-240V AC 50/60Hz power supply.

• The Electrical network is classified as

hazardous. The only way to power down the charger is to unplug the power supply from the electrical outlet. Ensure that the electrical outlet is always easily accessible.

Warning

To avoid damage or malfunction:

• Do not expose the wireless TV link to

excessive heat caused by heating equipment or direct sunlight.

• Do not drop your wireless TV link or

allow objects to fall on your wireless TV link.

• Do not use any cleaning agents

containing alcohol, ammonia, benzene, or abrasives as these may harm the set.

• Do not use the product in places

where there are explosive hazards.

• Do not let small metal objects come

into contact with the product. This can deteriorate audio quality and damage the product.

• Active mobile phones in the vicinity

may cause interference.

• Do not open your product as you

could be exposed to high voltages.

• Do not allow the charger to come into

contact with liquids.

• Do not allow the TV link to come into contact with liquids.

• Use only with provided power supply.

Manufacturer: Concord. Model Name: CM-3AD09005.

• Power supply information for receiver and transmitter

Input: AC100-240V/120mA, 50Hz/60Hz Output: DC9V/500mA About operating and storage temperatures:

• Operate in a place where temperature is always between 0 and 103ºF).

• Store in a place where temperature is always between -10 and 70ºC (14 to 157ºF).

40ºC (32 to

1.2 Conformity

This product has been designed, tested and manufactured according the European R&TTE directive 1999/5/EC

Following this directive, this product can be brought into service in the following states:

Class identifier. This is a class 1 product.

We, Philips, declare that the product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can find the Declaration of Conformity on www.p4c.philips.com.

4 Important

1.3 Recycling and disposal

Disposal instructions for old products.

The WEEE directive (Waste Electrical and Electronic Equipment; 2002/96/EC) has been put in place to ensure that products are recycled using best ?available treatment, recovery and recycling techniques to ensure human health and high environmental protection.

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

Do not dispose of your old product in your general household waste bin.

Inform yourself about the local separate collection system for electrical and electronic products marked by this symbol:

Use one of the following disposal options:

1. Dispose of the complete product (including its cables, plugs and accessories) in the designated WEEE collection facilities.

2. 2. If you purchase a replacement product, hand your complete old product back to the retailer. He should accept it as required by the WEEE directive.

Packaging information: Philips has marked the packaging with standard symbols designed to promote the recycling and appropriate disposal of your eventual waste.

A financial contribution has been paid to the associated national recovery & recycling system. The labeled packaging material is recyclable.

1.4 Electric, Magnetic and Electromagnetic Fields ("EMF")

1. Philips Royal Electronics

Manufactures and sells many consumer oriented products which usually, as with any electronic apparatus, have the ability to emit and receive electro magnetic signals.

2. One of Philips' leading Business

Principles is to take all necessary health and safety precautions for our products, to comply ?with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the ?products.

3. Philips is committed to develop,

produce and market products that cause no adverse health effects.

4. Philips confirms that if its products

are handled properly for their intended use, they are safe to use according to scientific ?evidence available today.

5. Philips plays an active role in the

development of international EMF and safety standards, enabling Philips to anticipate further ?developments in standardisation for early Integration in its products.

Important 5

1.5 Installation requirements

The product transmits and receives radio waves when it is switched on. The product complies with the standards that are defined for it.

As the product is based on RF technology, the quality of the image can be influenced by microwave ovens, Bluetooth, Wifi etc. Therefore the product can suffer from the same kinds of interference as GSMs, portable radios and other RF-based products.

6 Important

+ 13 hidden pages