Philips SL-300-I Service manual

SL300i

all versions

Published by PW 0418 Service Audio Printed in The Netherlands Subject to modification Version 1.0

Wireless Multimedia Link

TABLE OF CONTENTS

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise without the prior permission of Philips.

Technical specification ......................................................1-1

Connections & Controls.....................................................1-2

Accessories .......................................................................1-3

Safety & Warnings.............................................................1-4

ESD protection equipment.................................................1-4

Service hints

Handling chip components............................................2-1

Tips for troubleshooting.................................................2-2

Service Test Program........................................................3-1

Block diagram....................................................................3-2

Circuit diagrams

StreamIOm Module G1.0/LinX......................................4-1

Main Board..................................................................4-14

Printed circuit boards

StreamIOm Module G1.0/LinX....................................4-10

Main Board..................................................................4-19

Exploded view ...................................................................5-1

Partslist..............................................................................6-1

Revision list .......................................................................6-1

1-1

TECHNICAL SPECIFICATION

General

Dimensions (incl. sockets & feet) : 184 x 196 x 65mm Net weight : 0.8kg

Power supply (via external AC/DC-Adaptor)

Mains voltage (AC) : 98-264V, 50-60Hz Power consumption : 17W max., <1W standby

Video playback performance

S/N Luminance : >60dB S/N Chrominance AM : >60dB S/N Chrominance PM : >60dB Bandwidth Luminance : 4.8MHz ±2dB

Y/Pr/Pb / Progressive Scan

S/N (all channels) : >60dB Bandwidth Y : >12MHz ±3dB Bandwidth PrPb : >6MHz ±3dB YPrPb crosstalk (bw < 10MHz) : < -50dB

Audio playback performance – Line out

Output voltage : 1.6Vrms ±2dB Channel unbalance (1kHz) : <1dB Frequency response : 20Hz-20kHz ±0.5dB Crosstalk (1kHz) : >80dB S/N unweighted : >90dB Dynamic range (1kHz) : >85dB Distortion and noise (1kHz) : >82dB

Audio playback performance – SCART out

Output voltage : 1.6Vrms ±2dB Channel unbalance (1kHz) : <1dB Frequency response : 20Hz-20kHz ±0.5dB Crosstalk (1kHz) : >75dB S/N unweighted : >85dB Dynamic range (1kHz) : >80dB Distortion and noise (1kHz) : >75dB

Network

Interoperability : Universal Plug&Play

(UPnP) Protocol : TCP/IP Wired Ethernet : RJ45 jack, IEEE802.3 Wireless LAN : WiFi IEEE802.11g

Supported multimedia formats

Audio playback : MP3, MP3pro, Real

Audio, PCM Video playback : MPEG1, MPEG2,

MPEG4, DivX4.0/5.03 Picture : JPEG, BMP, GIF Playlist : M3U, ID3

1-2

CONNECTIONS & CONTROLS

Front View (all versions) Rear View (version /37) Rear View (versions /00/05/19)

ACCESSORIES

elcitrA rebmunedoC 00/i003LS 50/i003LS 91/i003LS 73/i003LS

)RUE(00/drocsniaM151890702242X X

)KU(50/drocsniaM741890702242X

)ASU(73/drocsniaM431890702242X

rotpadACD/CA

00/5221SCCBS/010-5382DA

120138033013 XXXX

10/1063541CRlortnocetomeR122368229313 XXXX

R+LoiduAelbachcniC116298033013 XXXX

elbacTRACS945006702242 XXX

elbacR+LoiduA&SBVC403006702242X

tesehthtiwdeilppus...x

soP noitcnuF skrameR

1ffO/nO rotacidniybdnatsderdetargetnihtiwnottubybdnatS/norewoP 2tuptuoR/LoiduA metsysoiduAnafostupnioiduathgirdnatfelehtoti003LSehttcennocoT 3SBVC/tuooediV tesVTafotupnioedivetisopmoCehtoti003LSehttcennocoT 4oediV-S/tuooediV tesVTafotupnioediV-Sehtoti003LSehttcennocoT 5rotcennoctenrehtE krowtenemohderiwarofnoitcennoctenrehtE54-JRlanoitpO 6tuptuoR/LoiduA metsysoiduAnafostupnioiduathgirdnatfelehtoti003LSehttcennocoT 7ni-CDrotpadarewops'i003LSehtgnitcennocroF 8tuptuoV/ATRACStesVTaoti003LSehtstcennoC

SAFETY & WARNINGS

ESD PROTECTION EQUIPMENT

ESD3 KIT – 4822 310 10671

• Anti-static table mat (600x650x1.25mm)

• Anti-static wristband

• Connection box (3 press stud connections, 1MΩ)

• Extendible cable (2m, 2MΩ, to connect wristband to connection box)

• Connecting cable (3m, 2MΩ, to connect table mat to connection box)

• Earch cable (1MΩ, to connect any product to table mat or to connection box)

All ICs and many other semiconductors are susceptible to electrostatic discharges (ESD). Careless handling during repair can reduce life drastically. When repairing, make sure that you are connected with the same potential as the mass of the set via a wristband with resistance. Keep components and tools at this potential.

f ATTENTION

Tous les IC et beaucoup d´autres semi-conducteurs sont sensibles aux décharges statiques (ESD). Leur longévite pourrait être considérablement écourtée par le fait qu´aucune précaution nést prise à leur manipulation. Lors de réparations, s´assurer de bien être relié au même potentiel que la masse de l´appareil et enfileer le bracelet serti d´une résistance de sécurité. Veiller à ce que les composants ainsi que les outils que l´on utilise soient également à ce potentiel.

d WARNUNG

Alle ICs und viele andere Halbleiter sind empfindlich gegenüber elektrostatischen Entladungen (ESD). Unsorgfältige Behandlung im Reparaturfall kann die Lebensdauer drastisch reduzieren. Sorgen Sie dafür, daß Sie im Reparaturfall über ein Pulsarmband mit Widerstand mit dem Massepotential des Gerätes verbunden sind. Halten Sie Bauteile und Hilfsmittel ebenfalls auf diesem Potential.

ñ WAARSCHUWING

Alle IC´s en vele andere halfgeleiders zijn gevoelig voor electrostatische ontladingen (ESD). Onzorgvuldig behandelen tijdens reparatie kan de levensduur drastisch doen vermindern. Zorg ervoor dat u tijdens reparatie via een polsband met weerstand verbonden bent met hetzelfde potentiaal als de massa van het apparaat. Houd componenten en hulpmiddelen ook op ditzelfde potentiaal.

i AVVERTIMENTO

Tutti IC e parecchi semi-conduttori sono sensibili alle scariche statiche (ESD). La loro longevità potrebbe essere fortemente ridatta in caso di non osservazione della più grande cauzione alla loro manipolazione. Durante le riparationi occorre quindi essere collegato allo stesso potenziale che quello della massa delápparecchio tramite un braccialetto a resistenza. Assicurarsi che i componenti e anche gli utensili con quali si lavora siano anche a questo potenziale.

Safety regulations require that the set be restored to its original condition and that parts which are identical with those specified be used. Safety components are marked by the symbol

Le norme di sicurezza estigono che l´apparecchio venga rimesso nelle condizioni originali e che siano utilizzati i pezzi di ricambiago identici a quelli specificati. Componenty di sicurezza sono marcati con

Veiligheidsbepalingen vereisen, dat het apparaat in zijn oorspronkeliijke toestand wordt teruggebracht en dat onderdelen, identiek aan de gespecificeerde, worden toegepast. De Veiligheidsonderdelen zijn aangeduid met het symbool

ESD

SAFETY

Bei jeder Reparatur sind die geltenden Sicherheitsvorschriften zu beachten. Der Originalzustand des Gerätes darf nicht verändert werden. Für Reparaturen sind Originalersatzteile zu verwenden. Sicherheitsbauteile sind durch das Symbol markiert.

Les normes de sécurité exigent que l`appareil soit remis à l`état d`origine et que soient utilisées les pièces de rechange identiques à celles spécifiées. Les composants de sécurité sont marqués

1-3

SERVICE HINTS

HANDLING CHIP COMPONENTS

2-1

TIPS FOR TROUBLESHOOTING

1. General information

The Wireless Multimedia Receiver SL300i contains the following printed boards and modules:

• External AC/DC-Adaptor

• Main Board

• Internet A/V-Module “StreamIOm G1.0/LinX”

• WiFi-Antenna (2x)

• Stand Illumination Board The external AC/DC-Adaptor, the Main Board and the Internet A/V module are not intended to be repaired on component level.

When shallow faultfinding fails and diagnostics threaten to escalate, the board/module in question should be replaced entirely.

2. Operational tests

The following checks will help to delimit hardware problems down to board/module level:

3. Functional tests

The following tests should be carried out before returning the set to the customer:

tsetlanoitcnuF ecneuqestseT

edomrevresyrotcaF

)ylnoeludommOImaertSfotnemecalperretfa(

CPnorevrestsetyrotcaftratS• → epyttestcerroctceles

)yllacitamotuanosrewopteslitnusyeksserp(sniamnigulp+)CR(YBDNATS+YBDNATShtiwtestratS•

noitarepolamronnisatooblliwteS•

evitcasirevrestsetyrotcafnehwDSOehtnoCN21tesyfidom/kcehC•

tsetgnimaertsderiW

erutcurtselifhguorhtetagivaN•

stuptuoenildnaecnaraeppaneercs,tuoenilkcehc,erutciptsetdnatnetnocoediVetartibhgihmaertS•

tsettuptuooediV

)ylnonoisrevRUErof(

CRno”uneM“sserP• → ERUTCIP → sgnittesVT → TUPTUOOEDIV → ”BGR“tceles

)BGRgnisufoelbapacsiVTehttahterussa(elbisivllitssiDSOfikcehC•

”uneM“gnisserpybSGNITTESTESER• → ”sgnittesteseR“ → SEY → sniamgulpnu

tsettuptuooediV

)ylnonoisrevATFANrof(

oediV-SdnaSBVCaivdetcennocVTnoelbisivsiDSOfikcehC•

”uneM“gnisserpybSGNITTESTESER• → ”sgnittesteseR“ → SEY → sniamgulpnu

tsetsseleriW

elbactenrehtEevomeR•

sniamnigulP•

CRehtnonottubKNIL-CPgnisserpybtinuehtpuekaW•

nwohseblliwskrowtensseleriW• → KOtihdnakrowtenruoytceles

tnetnocoedivetartibhgihmaertS•

nwohserasliatedDSOeromdnarabyekrolocfikcehcdnayldetaeperCRehtnoyekDERehtsserP•

sraeppasidrabyekruoloClitnusserP•

yalpsemuserdnasesuaptesehtfikcehcdnayldetaeperCRehtnoyekESUAPehtsserP•

CRno”uneM“sserP• → krowteN → sgnittessseleriw → gniretneybDISSehtyfidomotyrtdnaDISS

.gnorwebyamselbacsseleriwfognituor,devresboerasmelborpfI.elytsSMSnisretcarahc01tuoba

sgnittesteseR

!evobadebircsedsastluafedyrotcafehtotteserebTSUMsgnitteslla,tsetlanoitcnufehtfopetstsalsA

emohehtottesehtgnitcennocsmelborpecaflliwremotsucehtdnakrowtonlliwdraziwnoitcennoceht,eslE

.edomtuptuooedivtluafedehterotseroslalliwteserehT.krowten

kcehC eruliafnonoitcariapeR

fikcehcdnarotpadA-C/CAlanretxetcennoC

.nosiDELyb-dnats

.rotpadA-CD/CAecalperkotonsiegatlovfI.V21sirotpadA-CD/CAfoegatlovtuptuofierusaeM

foruolocfikcehC.nottubyb-dnatsehtsserP

.eulbotdermorfsegnahcDEL-ybdnats

.draoBniaMeritneecalperkoerasnoitcennocfI.selbacCFFkcehC

fidnaskrowDSOfikcehcpusekawtinufI

.yekUNEMehtnoesnopserynasiereht

metsys“ehtretnelliwsihT.sniamnigniggulpelihwdesserpedCRehtno)yekeltitbus=(yekDERdloH

.tenretniaiverawmrifeludomehtgnidaolnwodrofDSOycnegremenawohslliwneercs-VT.”edomyrevocer

.)eunitnocotdetpmorpnehwCRehtnoyekDERsserp(neercsnosnoitcurtsniehtwolloF

!SSERGORPNISIDAOLNWODELIHWTCENNOCSIDTONOD

takrowtonseodDSOropuekawotsliaftinufI

lla

.eludommOImaertSeritneecalpeR

yrotcafees(eludomehtotnidemmargorpebtsumCN21teseht,eludommOImaertSgnicalpernehW:noituaC

.)evobaees(edomyrevocermetsysaiverawmrifedargpu,CN21tesehtgnittesretfA.)3-4retpahc,revrestset

gnimaertssseleriwtubskrowgnimaertsderiwfI

sliaf

mOImaertSeritneecalpersniamermelborpfI.draC-iFiWecalperkosigniriwfI.sannetnA-iFiWfogniriwkcehC

.eludom

dnuoftluafonfI .)evobaees(edomyrevocermetsysaiverawmrifedargpU

2-2

4. Wiring instructions for WiFi-Antennas

Caution: The terminals for the WiFi-Antennas must not be interchanged!

The cable connected to the “Main” terminal on the WiFi-Card MUST be connected to the antenna on the right side of the set (seen from front panel). Wrong wiring will disturb the functionality of the IR-Receiver and cause serious problems with the Remote Control in WiFi mode.

WiFi-Antenna 1

(Main)

WiFi-Antenna 2

(AUX)

2-3

3-1 3-1

SERVICE TEST PROGRAM

PRELIMINARY

SETUP

Display shows

firmware version

<S> 300I – EU SET: xx

RC “2”

pressed?

Temp. Test

Read & display

NTC values and

Port states

(see table 1)

RC “STOP”

pressed?

To enter the service test program

• hold the “Standby” button depressed while

• connecting the set to mains After approx. 6 seconds the firmware version is displayed.

MAIN MENU

“INTERNET”

pressed?

iSIO Test 1

Version report

(see table 2)

RC “NEXT”

pressed?

iSIO Test 2

PCI/IIC test

(see table 2)

RC “NEXT”

pressed?

iSIO Test 3

RAM/ROM test

(see table 2)

RC “STOP”

pressed?

RC “STOP”

pressed?

Table 1 – Temp. test

Input line

TEMP_SEN VER_OPT 300N400

Test point

pin 18 pin 22 pin 23

Value

Temp. in °C decimal 0=SL400i NAFTA

Display

Line1: STR:xxx V:---

Line2: T:x FB:x 1=SL400i EU 2=SL300i NAFTA 3=SL300i EU

FBIN SVID nPROSCAN

pin 17 pin 8 pin 16

0 or 1 0 or 1 0 or 1

Line3: SV:x PRO:x

Table 2 – iSIO test

Test step

Version report

PCI/IIC test

Display

Line1: StreamIOm Line2: xx.xx.xxxx Line3: VMC x-x-x-xxx-xx Line1: PCI/IIC COMM Line2: PASS or FAIL + Error code (see table 4)

Remarks

Reads and shows the iSIO firmware version (line 2) and the Version Matrix Code (line 3). The meaning of the 8 VMC digits is described in table 3. Checks communication to PCI/IIC devices

• WiFi card

• Ethernet controller

Table 4 – Error codes

Error code

0x01 0x02 0x04 0x08 0x10 0x20 0x40 0x80 0x00000001 0x00000002 0x00000003 0x00000004 0x00000005 0x00000006 0x00000007 0x00000008

Description

FSM_PCI_INIT_ERROR FSM_PCI_MINIPCI_MISSING FSM_PCI_TRIMEDIA_MISSING FSM_PCI_PCILAN_MISSING FSM_PCI_UNKNOWN_DEVICE FSM_IIC_SA7104_ERROR FSM_IIC_STV6618_ERROR FSM_IIC_CS4362_ERROR FLASH_ERROR_OPEN_FOR_WRITE FLASH_ERROR_WRITING FLASH_ERROR_CLOSE_AFTER_WRITE FLASH_ERROR_OPEN_FOR_READ FLASH_ERROR_FILE_LENGTH FLASH_ERROR_WRONG_DATA FLASH_ERROR_CLOSE_AFTER_READ FLASH_ERROR_REMOVE_FILE

• Video switch

• SPDIF receiver

• Audio DAC

RAM/ROM test

Line1: RAM/ROM TEST Line2: PASS or FAIL + Error code (see table 4)

Verifies checksums of iSIO's

• EEPROM

• FLASH

• SDRAM

• PLD

CVBS test

Line1: CVBS TEST PIC

Output of a test picture (Video DAC) Format CVBS and S-Video

RGB/YUV test

Line1: RGB/YUV TEST PIC

Output of a test picture (Video DAC) Format RGB or YUV (dep. on set version)

RC “NEXT”

pressed?

RC “STOP”

pressed?

iSIO Test 4

CVBS test

(see table 2)

RC “NEXT”

pressed?

RC “STOP”

pressed?

iSIO Test 5

RGB/YUV test

(see table 2)

RC “STOP”

pressed?

Table 3 – Version Matrix Code (VMC)

Region Code

Digit Description

1 Region Code 1 USA 2 EU 3 AP 4 Australia, NZ, Latam 5 Russia, India 6 China 7 Baltic (plays region 2 and 5)

2 TV System 1 NTSC/PAL 2 PAL/NTSC 3 NTSC/PALn 4 PALm/PAL

3 Menu/AS Language 1 USA 2 EU 3 AP 4 Others

4..6 Architecture Feature Set 001, 002, Refer Version Matrix 003, etc.

7..8 OEM Derivative 00 Philips 01 Grundig 02 Marantz 03 B&O 04 Magnavox 05 Loewe 06 Yamaha 07 Hitachi 08 Audio 09 TV 10 etc. 99 Test purpose

Menu/AS

Language

Architecture Feature Set

OEM

DerivativeTV System

3-2

BLOCK DIAGRAM

WiFi ANT. 1 WiFi ANT. 2

iSIO G1.0/LinX MAIN BOARD

RJ45

CONNECTOR

10 987654321

WiFi CARD

+3.3V

+2.5V +3.3V

+3.3V

RESET

7120

+3.3V

MAST.

CLOCK

7124

+5V

30MHz

12V_SW

MINI PCI CONNECTOR

5300

RX–

RX+

TX–

TX+

10/100BASE-TX PULSE TRANS.

+3.3V

TPRDP

TPRDM

TPTDP

TPTDM

ETHERNET MEDIA

ACCESS CONTROLLER

DP83815DVNG

7300

PCI-BUS

+3.3V

7211

DISK ON CHIP

+3.3V

VCC 7209, 7210

VCC 7403

PLD

+3.3V

VDDVCC

SDRAM (4x)

+3.3V

VCC

7202, 7203 7212, 7213

7125

TRIMEDIA

DIGITAL SIGNAL PROCESSOR

PNX1302

7126

DIGITAL VIDEO

AUDIO DAC

VDVA

+5V

ENCODER SAA7104H

7608

7706

RED/CR/C/CVBS

GREEN/VBS/CVBS

BLUE/CB/CVBS

HSM/CSYNC/VSM

VIDEO BUFFERS

AUDIO

MUTE

5VSTBY

MICROCONTROLLER

TMP88CU77F

FLASH (2x)

EEPROM

12V 12V_SW

STAB.

5VSTBY

12V_ON

n5V_ON

BLIGHT

FAN_CON

PWR_LED

ACTIVE_LED

ROUT/C

GOUT/Y

BOUT

CVBSOUT

MUTE_SCART_LO

7301

RE_RC6

5VSTBY

RC6

AOUT1L

AOUT1R

7215

CVBSOUT

FBOUT

ROUT

GOUT

0_6_12V

BOUT AIN1L

AOUT1L

AOUT1R

not for US version /37

S-VIDEO

32.768kHz12MHz

CVBSOUT

AOUT1L

AOUT1R

only for US version /37

SCART

GND

GND GND

GND

GND GND

CVBS

LINE OUT 2

EXTERNAL

AC/DC-ADAPTOR

AD2835-010/

SBC CS1225/0

12V

FAN

7402

DC/DC CONV.

12V_SW

FAN

CONT.

7401

DC/DC CONV.

-5V

12V

ACTIVE LED STANDBY LED

LINE OUT 1

AOUT1L

AOUT1R

STAND ILLUMINATION

12V

4-1

StreamIOm G1.0/LinX

Internet A/V Module

This module is not intended to be repaired on component level.

Circuit Diagrams and Printed Circuit Board drawings

are published for orientation only.

In case of defects please replace the entire module.

Modules can be ordered with codenumber “3103 308 67790”.

Internet A/V Module – Service Hints

The Internet A/V Module StreamIOm G1.0/LinX is not intended to be repaired on component level.Only the complete Printed Board Assembly and the Wireless LAN Card are available as service spare part.These articles can be ordered with the following codenumbers:

StreamIOm G1.0/LinX PBAS.......3103 308 67790

Wireless LAN Card.......................9307 008 01371

Factory T est Server Application

The Factory Test Server serves two purposes:

1.To test the Internet streaming of the module, without having a broadband Internet connection present.

2.To program the SET 12NC into the module after replacement.

The Factory Test Server Application is available at dedicated workshops, only.

Basic requirements:

• PC running Windows NT4 Service Pack 6 or higher,

Windows 2000, or Windows XP Pro

• 400MB hard disk space

• Ethernet network card

• Ethernet crossover cable or Ethernet hub with standard

patch cable

• Wireless Access Point

• Mouse

• Monitor

• CD-ROM drive (for installation)

For detailed instructions on how to install, setup and use this application please refer to the “Factory Test Server Application Manual”, included on the CD-ROM.

Important note: When replacing the Internet A/V Module the set 12NC must be programmed into the module before returning the set to the customer !! The 12NC depends on the stroke version of the set and can only be programmed with the help of an external application – the so-called Factory Test Server.

+ 21 hidden pages