Philips ReActiv 4.0 S, ReActiv PTE4000CR, ReActiv 4.0 U, PTE4000CU User Manual

ReActiv

Recumbent stepper

4.0 S

User manual

Please read this entire manual carefully
before operating your new recumbent
stepper and save it for future use.

PTE4000CS

Register your product and get support at
www.philips.com/welcome

Thank you for your recent purchase of the Philips physical rehabilitation
recumbent stepper 4.0 S.
Philips physical therapy and exercise solutions provide simple, reliable
products that oer the most relevant feedback to caregivers and
users to achieve best-in-class outcomes and empower individuals to
build condence in rebuilding and maintaining healthy lifestyles and
keep in touch with their communities.
Your new product has been manufactured by one of the world’s leading
medical product manufactures. It is backed by one of the most
comprehensive warranties in the industry. Through our dealers,
distributors and manufacturer’s representatives, we will do all we
can to provide many years of successful and prosperous ownership.
Your warranty and service needs will be addressed either through your
regional sales representative or our highly trained service technicians.

It is their responsibility to provide you with both the technical
knowledge and access to service personnel to make your ownership
experience more informed, and resolve any issues quickly.

Product registration

Register your product and get support at:
www.philips.com/welcome

This will ensure we have all your details quickly at hand in dealing with
any after sales support. For fastest support visit us and self service
solution at :
www.philips.com/support

Philips therapy solutions

Delivering better outcomes

Contents

Important safety instructions 4

Important electrical information

Important operation instructions 7

Features 8

Assembly instructions 9

Console operation 14

Using a heart rate transmitter 30

6

Maintenance 33

Important
safety
instructions

Attention

Read all instructions in this manual before using this device.

Danger

To reduce the risk of electric shock disconnect this device from the
electrical outlet prior to cleaning and/or service work.

Warning

• Before beginning exercise on this product, or any exercise program,
consult a physician. This is especially important for persons over the
age of 35 or persons with preexisting health conditions.

• There are obvious pinch points and other caution areas that can
cause harm.

• Children under the age of 13 should be supervised to ensure that they
do not play with the device.

• Keep hands away from all moving parts.

• Never drop or insert any object into any openings.

• Do not use outdoors.

4

• Do not operate this product on deeply padded, plush or shag
carpet. Damage to both carpet and product may result.

• Do not attempt to use this product for any purpose other than for
the purpose it is intended.

• Do not operate where aerosol spray products are being used or
where oxygen is being administered. Sparks from the motor may
ignite a highly gaseous environment.

• Never operate the product if it has a damaged cord or plug. If the
product is not working properly, call your dealer.

• Keep the cord away from heated surfaces.

• The hand pulse sensors are not medical devices. Various factors,
including the user’s movement, may aect the accuracy of heart rate
readings. The pulse sensors are intended only as an exercise aids in
determining heart rate trends in general.

• Heart rate monitoring systems may be inaccurate. Over exercising
may result in serious injury or death. If you feel faint stop exercising
immediately.

• Wear proper shoes. High heels, dress shoes, sandals or bare feet are
not suitable for use on your tness bike. Quality athletic shoes are
recommended to avoid leg fatigue.

• This appliance is not intended for use by persons (including chil­dren) with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been given supervi­sion or instruction concerning use of the appliance by a person
responsible for their safety.

• Maximum User Weight: 450 lbs.

• Save these instructions - think safety!

5

Important
electrical
information

Warning

• Never expose this product to rain or moisture. This product is not
designed for use outdoors, near a pool or spa, or in any other high
humidity environment. The operating temperature specication is 5
to 48 degrees Celsius (40 to 120 degrees Fahrenheit), and humidity
is 95% non-condensing (no water drops forming on surfaces).

6

Important
operation
instructions

• Never operate this product without reading and completely

understanding the results of any operational change you request

from the console.

• Understand that changes in resistance do not occur immediately.

Set your desired resistance level on the console and release the

adjustment key. The console will obey the command gradually.

• Use caution while participating in other activities while pedaling

on your product; such as watching television, reading, etc. These

distractions may cause you to lose balance which may result in
serious injury.

• Do not use excessive pressure on console control keys. They are
precision set to function properly with little nger pressure.

7

Features

1

2

3

4

8

7

5

4.0 S Recumbent stepper

6

Parts and adjustments

1. Console

2. Upper body handles

3. Quick release lever

4. Cushioned footplates

5. Lifting handle for transport

6. Leveling glides

7. Seat angle adjustment

8. Seat position adjustment

8

Assembly
instructions

Unpacking

• Cut the straps, then lift the box over the unit and unpack.

• Carefully remove all parts from the carton and inspect for any damage
or missing parts. If parts are damaged or missing, contact your dealer
immediately.

• Locate the hardware package. Remove the tools rst. Remove the
hardware for each step as needed to avoid confusion. The numbers in
the instructions that are in parenthesis (#) are the item number from
the assembly drawing for reference.

Tools included

• 5mm L allen wrench

• 8mm L allen wrench

• 12/14mm wrench

• 13/14mm wrench

• Phillips screwdriver

• Short phillips screwdriver

Parts included

• 1 main frame

• 2 foot pedals

• 1 seat cover

• 1 connecting arm

• 1 console mast

• 1 console mast cover

• 1 handle bar

• 4 end caps

• 2 transport wheels

• 1 seat

• 1 seat back frame

• 2 swing arms

• 1 console

• 1 hardware kit

• 1 drink bottle holder

• 1 power cord

9

Assembly

Read each step’s instructions and study the drawing carefully to become
familiar with all the parts and procedures before beginning each step.

Step 1.

• Secure the pedals with phillips head screws (155).

• Install seat cover (45).

• Use hex head bolts (203) with at washers (204) and nyloc nuts (206)
and hex head bolts (201) and at washers (204) and nyloc nuts (206)
to secure handlebar on the seat assembly.

• Connect hand pulse cables; arrange cables taking care so they are not
crushed during seat adjustment.

Hardware for step 1

Part Type Description

203

201

202

155

204

205

206

161

Hex head bolt

Hex head bolt

Hex head bolt

Phillips head screw

Flat washer

Flat washer

Nyloc nut

Nyloc nut

45

3/8" x 3-1/4"

3/8" x 2"

5/16" x 1-1/4"

M5 x 12

3/8"

Ø8.5

3/8"

5/16"

155

Qty

2

4

1

12

8

2

6

1

Computer

cable

155

155

203

204

204

206

204

206

161

204

206

205

155

202

206

204

203

204

220 221 176 177

10

Step 2.

• Install transportation wheels (87) with button head bolts (209) and
nyloc nuts (161).

• Place the console mast (2) through the console mast cover (76) with
the correct orientation. Snake the console cables through the bottom
end of the console mast and out through the top.

• Insert the mast on the main frame and use hex head bolts (208) with
split washers (211), at washers (169) and nyloc nuts (206) to secure on
the side. Then use hex head bolts (207) and curved washers (210) to
secure at the front and back of the mast.

• Plug in the end caps (67) on oval stabilizer tubes.

• Install water bottle cage (111).

Hardware for step 2

Part Type Description

209

207

208

169

210

206

161

211

Button head bolt

Hex head bolt

Hex head bolt

Flat washer

Curved washer

Nyloc nut

Nyloc nut

Split washer

5/16" x 1-3/4"

M8 x 16

3/8" x 2-1/2"

3/8"

Ø8

3/8"

5/16"

Ø10

76

67

Qty

Computer

161

2

2

2

2

2

2

2

2

cable

87

209

208

161

211

87

169

207

207

210

206

210

67

67

209

67

111

173 174 217

11

Step 3.

• Put the seat cushion on the seat carriage and secure with hex head
bolts (145).

• Insert the seat back in the seat carriage and secure with hex head
bolts (212), at washers (172) and nyloc nuts (206).

Hardware for step 3

Part Type Description

145

172

206

212

Hex head bolt

Flat washer

Nyloc nut

Hex head bolt

35

M6

3/8"

3/8" x 7

3/8" x 1-3/4"

145

145

212

212

Qty

4

2

2

2

Computer

cable

36

206

172

172

206

221 217 219

12

Step 4.

• Connect the cables from the mast to the console (27) and use phillips
head screws (155) to secure it.

• To install left and right swing arms use hex head bolts (213), at wash­ers (214), split washers (216) and curved washers (215).

Hardware for step 4

Part Type Description

155

213

214

215

216

Phillips head screw

Button head bolt

Flat washer

Curved washer

Split washer

27

Computer

cable

M5 x 12

3/8" x 3/4"

3/8" x 19 x 1.5

10 x 21.3 x 7.8

Ø10

155

Qty

4

12

4

8

12

213

213

216

216

215

215

216

213

214

176 221

13

213

216

215

214

215

216

213

216

213

Console
operation

4.0 S console

1

Message window

2

Dot matrix window

5

Fan

3

Program keys

4

Function keys

6

Resistance level
or adjustment
up / down keys

Power on

The 4.0 S has a built in generator for power, but can be plugged into
an outlet for very low speed operation is required. When the 4.0 S is
pedaled, or the DC power cord is connected to the equipment, the
console will automatically power up.

The console will go to the start up display, also known as Idle mode.
The message window will be scrolling the start up message. You may
now begin to use the 4.0 S.

14

CSAFE feature

Your console is equipped with a CSAFE feature. The power (POWER)
port can be used for powering a remote controlled audio-visual system
by connecting a cable from the remote to the power port at the back of
the console. The Communication port (COMM) can be used to interact
with software applications.

Quick start

This is the quickest way to start a workout. After the console powers up
you just press the start key to begin. This will initiate the quick start
mode. In quick start, the time will count up from zero, all workout data
will start to accrue and the workload may be adjusted manually by
pressing the plus and minus keys. As you increase the workload more
rows will light indicating a harder workout. The stepper will get harder
to pedal as the rows increase.

There are 20 levels of resistance available for plenty of variety.
The rst 5 levels are very easy workloads, and the changes
between levels are set to a good progression for de-conditioned
users. Levels 6-10 are more challenging but the increases from
one level to the next remain small. Levels 11-15 start getting tough
as the levels jump more dramatically. Levels 16-20 are extremely
hard and are good for short interval peaks and higher
performance training.

15