Quick Start Guide
1
Quick Start Guide
2
User Manual
MCD119
What’s in the Box?
You should find these items upon opening the box.
Composite Video Cable
FM antenna
Audio cable
Quick Start Guide
Remove the plastic
protective sheet
Remote control with
battery
User Manual
1
2;
A
AUDIO OUT
L
R
B
Connect the speaker cables.
2
Connect the FM antenna.
Tip
See the User Manual for other TV
connection options.
Speaker
(right)
3
MW antenna
FM antenna
2
3
Connect the composite video cable to a TV.
4
Connect the power supplies of the system and TV.
Speaker
(left)
A To listen to the sound of this DVD Player
through your TV, use the audio cables (white/
red) to connect LINE OUT (L/R) jacks of
the DVD Player to the corresponding
AUDIO IN jacks on the TV.
1
AC power adaptor
Tip
The USB feature is not available for
this product.
4
B To listen to the sound of your TV through
this DVD player, use a cinch cable to connect
AUX IN on the rear panel of the DVD
player to the corresponding AUDIO OUT
jacks on the TV.
Setting up the TV
1
Press SOURCE (DISC on the remote) to select disc source.
2
Turn on the TV and set it to the correct Video In channel.
Setting the clock
2;
2;
ITALIAN
RUSSIAN
DIVX(R) VODDIVX(R) VOD
1
In standby mode, press and hold DISPLAY/CLOCK on the remote control.
2
When the hour digits flash, press VOLUME +/- on the front panel or VOL +/- on the
remote to set the hours.
3
Press DISPLAY/CLOCK again and the minute digits flash. Then press VOLUME +/- on
the front panel or VOL +/- on the remote to set the minutes.
4
Press DISPLAY/CLOCK again to confirm the time setting.
Setting system menu options
Tip
See chapters "Preparations" and "System Menu Options" in the User
Manual for detailed descriptions.
Playing a disc
1
Push OPEN•CLOSE 0 on the top of the system to open the disc door.
2
Insert a disc with the print side facing up and close the disc door.
3
Playback will start automatically. If not press ÉÅ.
4
To stop playback, press 9.
Programming and tuning to radio stations
1
Press SOURCE (TUNER on the remote) to select tuner source.
2
Press PROG/ANGLE for more than two seconds to program all available stations in
order of waveband.
3
Press í/ë until the desired preset station is displayed.
Tip
Detailed playback features and additional functions are described in the
accompany owner's manual.
C Royal Philips Electronics N.V. 2007
All rights reserved.
http://www.philips.com
PDCC-LL-0731
Loading...