Page 1
Quick start guide
MCB204
What’s in the Box?
You should find these items upon opening the box.
Pull out the plastic
protective sheet
before use.
Remote Control
Quick Start Guide
1
Quick Start Guide User Manual
2
User Manual
Page 2
AUX
HEADPHONE
RIGHT LEFT
1
Connect the speaker cables.
2
Connect the power cord of the system..
FM/DAB antenna
Speaker
(right)
1
AC power adaptor
Setting the clock
1
In standby or active mode, press CLOCK on the remote.
Speaker
(left)
1
2
Tip
See the User Manual for how to
connect other equipment to this
system.
2
When the hour digits flash, press TUNING 4 ¢ on the front panel (or ¡ / ™ on the
remote control) to set the hours.
3
Press CLOCK again and the minute digits flash. Then press TUNING 4 ¢ or ¡ / ™
again to set the minutes.
4
Press CLOCK again to confirm the time setting.
Page 3
Playing a disc
1
Press SOURCE on the front panel to select CD or press DISC on the remote control.
2
Press OPEN/CLOSE çto open the CD compartment.
3
Insert a disc with the printed side facing up. Press OPEN/CLOSE ç again to close the
compartment.
4
Press ÉÅ to start playback.
5
To stop playback, press 9.
Tip
See the User Manual for detailed playback operations.
d
o
i
r
e
p
d
e
g
D
o
n
o
t
p
n
o
l
o
r
p
a
r
u
o
t
t
i
h
n
g
i
l
d
i
n
r
u
e
s
c
t
Playing a USB mass storage device
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players
(USB 2.0 or USB1.1), memory cards (requires an additional card reader to
work with this Hi-Fi system).
1
Insert the USB device’s USB plug into the socket on the set.
2
Press SOURCE once or more (or USB on the remote control) to select USB.
3
Play the USB’s audio files as you do with the albums/tracks on a CD.
Page 4
Programming and tuning to radio stations
1
Press SOURCE on the front panel repeatedly (or DAB/FM on the remote
control) to select the tuner source.
2
Press PROGRAM for more than two seconds to program all available stations.
3
Press ALBUM/PRESET 4 or 3 (or ¡ / ™ on the remote control) until the
desired preset station is displayed.
Tip
Detailed playback features and additional functions are described
in the accompany owner's manual.
Tuning to DAB stations
1
Press SOURCE on the front panel to select DAB (or press DAB/FM on the remote
control) to start automatic search for available DAB stations.
2
Press and hold SCAN on the front panel (or SMART SCAN on the remote control)
to scan all band III frequencies.
3
At the completion of full scan, press
remote control to select your desired DAB channels.
4
Press ENTER/ÉÅ to confirm and tune to your selected channel.
Tips
– If the reception is poor, hang up one end of the T-shape FM/DAB antenna
and keep the other end at horizontal angle to it.
– See the User Manuals for detailed instructions on DAB operations.
S/T on the front panel or press ¡ / ™ on the
C Royal Philips Electronics N.V. 2007
All rights reserved.
PDCC-SY/ZC-0714
Loading...