Philips LFH 5280, LFH 5284, LFH 5282 User Manual
SpeechMike
Barcode Scanner
simply working smarter
Quick Reference........ 3
Référence Rapide.......7
Schnellreferenz.........11
www.phil i ps. c o m / d i c t a t i o n
Guía Rápida...............15
Snabb Referens.........19
SpeechMike Barcode Scanner Quick Reference ____________________________________ 3
SpeechMike Barcode Scanner Quick Reference
General Information
This usage guide contains information how to use your SpeechMike Barcode
Scanner.
Information about system requirements, installation, SpeechMike buttons, and
troubleshooting can be found in the SpeechMike Quick Reference guide provided
with this product.
Barcode Scanner
The SpeechMike Pro Barcode Scanner has a built-in bar code scanner that can be
programmed to suit the application you are using. The scanner is connected to the
PC via the USB interface. The scanner supports the following standards: EAN,
UPC, Code 128, Code 39, Code 93, Code 11, Interleaved 2 of 5, Discrete 2 of 5,
Chinese 2 of 5, Codabar, MSI Code, and RSS.
SpeechMike Barcode Scanner Buttons
Using the scanner
The barcode scanner is activated by pressing the scanner trigger button. The
device will scan for 3 seconds each time the trigger is depressed. You can scan
barcodes at a distance up to 30 cm.
When the barcode has been scanned successfully, the device will beep and the
numbers and letters of the barcode are inserted into the currently active
application.
Adjusting the scan angle
The scan angle of the barcode scanner can be adjusted in two positions by 25° for
your convenience.
4 ____________________________________ SpeechMike Barcode Scanner Quick Reference
To adjust the scan angle twist the adjustment button in the direction the scan beam
shall be moved to.
Configuring the Barcode Scanner
Your SpeechMike Pro Barcode Scanner is preconfigured with the keyboard
language US English and the suffix "carriage return" (CR). Before using the
Barcode Scanner for the first time, it is necessary to adapt it to your local keyboard
language. This must normally be carried out once only.
To change the scanner configuration, call up the scanner configuration program
Barcodeconfig.exe on the CD. With this application, you can easily change the
keyboard language, prefix, and suffix.
For more information on adapting the barcode scanner to your individual needs,
consult the User manual or the Advanced Barcode Scanner Configuration Guide on
the CD.
Disclaimer and notices
Philips Speech Processing has carried out extensive testing with most popular
configurations. However, since PC add-ons and drivers change very rapidly, we are
unable to guarantee conflict-free operation. Possible solutions for solving such
conflicts can be found in the Readme file.
Trademarks
SpeechMike is a trademark of Philips.
The CE mark confirms that the machine corresponds to the
relevant guidelines of the European Union.
This manual has been printed on chlorine-free, recycled paper,
in line with the highest standards of environmental friendliness.
The cardboard used for packaging can be recycled. This
electronic facility contains recyclable material.
This product complies with the Directive of the European
Parliament and the Council on the Restriction of the use of
certain hazardous substances in Electrical and Electronic
Equipment.
Technical changes and errors excepted.
SpeechMike Barcode Scanner Quick Reference ____________________________________ 5
CLASS 1 LASER PRODUCT
This product complies with:
• 21CFR1040.10 and 1040.11 except for deviations pursuant to Laser
Notice No. 50, dated July 26, 2001. “
• “EN60825-1:1994+ A1:2002 +A2:2001”
• “IEC60825-1:1993+A1:1997+A2:2001”
The laser classification is marked near the scanner window on the product.
Class 1 Laser devices are not considered to be hazardous when used for their
intended purpose. The following statement is required to comply with US and
international regulations:
Caution:
Do not try to open the unit. Allow only authorized Service technicians to repair the
unit. Use of controls, adjustments or performance of procedures other than those
specified herein may result in hazardous laser light exposure.
Declaration of Conformity
Model Numbers: LFH 5280, LFH 5282, LFH 5284
Trade Name : SpeechMike Classic, SpeechMike Pro
Responsible Party: PHILIPS DICTATION SYSTEMS
Address: 64 Perimeter Center East, Fifth Floor
Telephone Number: +1 770 821 2400
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation
Atlanta, GA 30346
USA
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
Référence Rapide SpeechMike Barcode Scanner __________________________________ 7
Référence Rapide SpeechMike Barcode Scanner
Informations générales
Le manuel utilisateur fournit des informations pour l’utilisation du SpeechMike
Barcode Scanner.
Les informations concernant les demandes de système, l’installation, les boutons
SpeechMike et les informations sur l’écart de l’embarras se trouvent dans le
Manuel Utilisateur SpeechMike fournis avec le produit.
Barcode Scanner
SpeechMike Pro Barcode Scanner contient un lecteur de code barre intégré et
programmable selon votre utilisation. Le lecteur doit être connecté à l’ordinateur
par un port USB. Le lecteur accepte les normes suivantes: EAN, UPC, Code 128,
Code 39, Code 93, Code 11, Interleaved 2 of 5, Discrete 2 of 5, Chinese 2 of 5,
Codabar, MSI Code, et RSS.
Boutons SpeechMike Barcode Scanner
L’utilisation du lecteur
Le lecteur de code barre doit être activé par le bouton de démarrage du lecteur. Le
lecteur est actif pendant 3 secondes après chaque démarrage. Le code barre peut
être lu d’une distance de 30 cm au maximum.
Après une lecture réussie, le lecteur émet un signe sonore, les numéros et les
lettres seront insérés dans l’utilisation actuelle.
Mise en point de l’angle du lecteur
L’angle du lecteur peut être mis en point en deux position avec 25°, selon
nécessité.
Loading...