Philips LFH 5250, LFH 5260, LFH 5262, LFH 5270, LFH 5272 User Guide
...
SpeechMike Classic / Pro / Pure / Barcode
For product information and support, visit
www.philips.com/dictation
LFH 5250
LFH 5260
LFH 5262
LFH 5270
LFH 5272
LFH 5274
LFH 5276
LFH 5282
LFH 5284
ES Manual del usuario 33
EN User manual 3
DE Benutzerhandbuch 13
FR Manuel de l‘utilisateur 23
NL Gebruikershandleiding 43
IT Manuale di istruzioni 53
SV Användarhandbok 63
User manual
1 Welcome 4
1.1 What’s in the box 4
2 Important 4
2.1 Safety 4
2.1.1 SpeechMike Barcode 4
2.2 Disposal of your old product 5
3 Get started 5
3.1 System requirements 5
3.2 Installation 5
3.3 Advanced configuration 6
4 SpeechMike Pro 5274
SpeechMike Pro Plus 5276 7
5 SpeechMike Classic 5260 / 5262
SpeechMike Classic Plus 5270 / 5272 8
6 SpeechMike Pure 5250 9
7 SpeechMike Barcode 5282 / 5284 10
7.1 Overview 10
7.2 Use the barcode scanner 10
7.3 Configure the barcode scanner 10
ENGLISH
8 Troubleshooting 11
9 Technical support and warranty 11
10 Technical data 12
3User manual
Welcome1
EN User manual 3
DE Benutzerhandbuch 13
FR Manuel de l‘utilisateur 23
LFH 5250
LFH 5260
LFH 5262
LFH 5270
LFH 5272
LFH 5274
LFH 5276
LFH 5282
LFH 5284
For product information and support, visit
www.philips.com/dictation
SpeechMike Classic / Pro / Pure / Barcode
ES Manual del usuario 33
NL Gebruikershandleiding 43
IT Manuale di istruzion i 53
SV Användarhandbok 63
INS/OVR
• EOL/••P
SpeechMike Pro
PLUS
RECORD
F 1
F 2
F 4
F 2
Congratulations on your purchase and welcome
to Philips!
Important2
Safety2.1
To fully benefi t from the service that Philips
o ers, visit our Website for support information
such as user manuals, software downloads,
warranty information and more:
www.philips.com/dictation.
To avoid short circuit, do not expose the •
product to rain or water.
Do not expose the device to excessive •
heat caused by heating equipment or direct
sunlight.
Protect the cables from being pinched, •
particularly at plugs and the point where they
What’s in the box1.1
exit from the device.
SpeechMike Barcode2.1.1
B Class 1 laser product
Hanging bracketSpeechMike
This product complies with:
21CFR1040.10 and 1040.11 except for •
deviations pursuant to Laser Notice No. 50,
dated July 26, 2001.
EN60825-1:1994 + A1:2002 + A2:2001•
IEC60825-1:1993 + A1:1997 + A2:2001•
User manualCD-ROM
The laser classifi cation is marked near the
scanner window on the product.
Class 1 Laser devices are not considered to
be hazardous when used for their intended
purpose. The following statement is required to
comply with US and international regulations:
4 User manual
A Caution
Do not try to open the unit. Allow only
authorized service technicians to repair the unit.
Use of controls, adjustments or performance
of procedures other than those specified herein
may result in hazardous laser light exposure.
Disposal of your old product2.2
Your product is designed and manufactured •
with high quality materials and components,
that can be recycled and re-used.
When this crossed-out wheeled bin •
symbol is attached to a product, it
indicates that the product is covered
by the European Directive 2002/96/
EC.
Please become informed about the local •
separate collection system for electrical and
electronic products.
Please act according to your local rules and •
do not dispose of old products with your
normal household waste. The correct disposal
of old products will help prevent potential
negative consequences for the environment
and human health.
Get started3
ENGLISH
System requirements3.1
Pentium III or similar, 500 MHz and 256 MB •
RAM; Recommended: Pentium IV, 1 GHz and
512 MB RAM
75 MB hard disk space for SpeechMike drivers, •
250 MB for Microsoft .NET Framework
One self-powered USB port•
Windows Vista, Windows XP•
D Note
For all operating systems, it is recommended
that the latest service pack available be installed
before installation.
Installation3.2
C Important
Administrator rights are required to install
the software. For more help, contact your
administrator.
Turn on the PC.1
Connect the USB plug of the SpeechMike to 2
a free USB port.
The 3 New Hardware Found message is
displayed and installation will proceed
automatically.
D Note
If the message does not appear, verify if
the USB port is enabled in the BIOS of the
5User manual
Loading...